Browse > Article
http://dx.doi.org/10.3795/KSME-A.2005.29.8.1043

A Study of Extrusion Process for Al 3003 Condenser Tube  

Bae, Jae-Ho (부산대학교 정밀기계공학과)
Lee, Jung-Min (부산대학교 정밀기계공학과)
Kim, Byung-Min (부산대학교 정밀금형 및 금형가공연구소)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.29, no.8, 2005 , pp. 1043-1050 More about this Journal
Abstract
Condenser tube is a component of the heat exchanger in automobile and air conditioning apparatus. It is generally made from the 1000 or 3000 series Al alloys that have good heat efficiency. In the case of 3000 series, these have high strength and hardness but have the disadvantage of low extruability. The development of extruding process in condenser tube with 3000 series Al alloys is studied in this paper. A study on extrusion process is performed through the 3D FE simulation in non-steady state and extrusion experimentation. Also, nano-indentation test is employed to estimate the weldability of tubes. Especially, An evaluation of the weldability using the nano-indentation is accomplished as compared with nano-hardness of welded part and the others in cross-section of tube.
Keywords
Condenser Tube; Porthole Die; Welding Pressure; Stree Analysis; Nano-Indentation;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Oosterkamp, A., Djapic Oosterkamp, L. and Nordeide, A., 2004, 'Kissing bond phenomena in solid-state of welds of aluminum alloys', Welding research, August, pp. 226-231
2 2002, 'Nano-indenter XP Manual,' MTS Systems Corporations
3 Oliver, W. C. and Pharr, G. M., 1992, 'An Improved Technique for Determinating Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments,' J. Mater. Res., Vol 7, No. 6, pp. 1564-1583   DOI
4 Lee, E. H., Mallet, R. L. and Yang, W. H., 1997, 'Stress and deformation analysis of the metal extrusion process,' Comp. Meth. In Appl. Mech. Eng., Vol. 10, pp. 339-353   DOI   ScienceOn
5 Lee, J. M., Kim, B. M., Jeong, Y. D., Jo, H. and Jo, H. H., 2003, 'The effect of chamber bottom shape on die elastic deformation and process in condenser tube extrusion,' Journal of KSPE, Vol. 20, No. 5, pp. 66-72   과학기술학회마을
6 Murakami, S., Isogai, M., Inagaki, T., Takatsuji, N., Tokizawa, M. and Murotani, K., 1997, 'Simulation of Rectangular Extruded Pipes by Porthole Die,' Journal of the JSPT, Vol. 38, No. 436, pp 79-83
7 Kiuchi, M. and Hoshino, M., 1991, 'Numerical Simulation of Forward Extrusion of Pipes through Bridge Die,' Journal of the JSPT, Vol. 32, No. 361, pp 174-181
8 Xie, J., Murakami, T. and Takahashi, H., 1990, 'Measurement of Pressure Distribution on Forming of Pipe by Four Billets Extrusion,' Journal of the JSPT, Vol. 31, No. 359, pp. 1469-1474
9 Yoneyama, T., Takatsuka, K., Kitagawa, M. and Hatamura, Y., 1995, 'Measurement of the Contact Pressure in Aluminum Hot Extrusion,' Journal of the JSPT, Vol. 36, No. 419, pp 1397-1402
10 Park, J. N., Park, T. J., Kim, D. H. and Kim, B. M., 2001, 'Experimental Investigation on the Flow Control in Forward-Backward Extrusion of Piston-Pin for Automobile,' Trans. of the KSME A, Vol. 26, No.7, pp. 1366-1375
11 Xie, J.X., Murakami, T., Takahashi, H. and Ikeda, K., 1993, 'Theoretical Analysis on Fabrication Process of Pipe by Multi-Billet Extrusion,' Journal of the JSPT, Vol. 34. 390, pp 823-829
12 'DEFORM$^{TM}$ -3D,' 1995, SFTC
13 Xie, J., Murakami, T. and Takahasi, H., 1990, 'Metal Flow in the forming of Hollow Cylinder by Four-Billet Extrusion,' Journal of the JSPT, Vol. 31, No. 351, pp 502-508
14 Hsiang, S.H. and Liao, C.S., 1997, 'Study on Hot Extrusion of Tubes,' Journal of Materials Processing Technology, Vol. 63, pp 254-259   DOI   ScienceOn