Browse > Article
http://dx.doi.org/10.3795/KSME-A.2004.28.5.654

Combined Process of Ironing and Redrawing in Progressive Drawing  

Chung, Joon-Ki (홍익대학교 기계/시스템디자인공학과)
Cho, Woong-Shick (한국산업기술대학교 기계설계공학과)
Lee, Taek-Sung (한국산업기술대학교 기계설계공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.28, no.5, 2004 , pp. 654-661 More about this Journal
Abstract
In deep drawing of sheet metal, there are many cases in which the uniform and thin wall thickness of the drawn products is more important than the bottom thickness. In this case, we can not easily get the deep drawn products with the uniform and precise wall thickness by only drawing process. Therefore in general the manufacturing processes which both the drawing and the ironing process are proceeded sequentially are used. But this method has the disadvantages of a cost-up, decrease of productivity and degradation of quality, because the ironing process is added after the drawing process. In this study, in order to improve those problems and to enhance the effect of deep drawing, the combined process of redrawing and ironing fur multistep drawing of cylindrical cups is used. In this experiment, we considered the characteristics of the combined process such as the relation between the drawing and ironing rates, the drawing limits and the forces needed for operations. The suggested force prediction shows that it can successfully represent experimental results.
Keywords
Deep Drawing; Forming; Ironing; Redrawing; Die;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Research Society for Precision Press Auto-Die, 1990, Press Die Lecture, Kijeon Yeonkusa, pp. 63-69
2 Cor, L., 1981, 'Two-piece Can Manufacturing : Blanking and Cup Drawing,' SMEs Modern Can Manufacturing Clinic, Society of Manufacturing Engineers, pp. 148-159
3 Matsya, S., 1979, Press Die Design Method, IPC, p. 22
4 Hutoida, T., 1993, Press Processing Technology Manual, Kijeon Yeonkusa, p. 91
5 Yoshida, K. and Yamakuchi, M., 1986, Die Design Standard Manual, New Technology Development Center, pp. 92-95
6 Press Processing Data Book Editing Committee, 1982, Press Processing Data Book, Nikan Engineering Newspaper Co., p. 274
7 ASM International Handbook Committee, 1974, Metal Handbook Volume 14 - Forming and Forging, ASM International, p. 507
8 Yoo, S., 1979, ASTM Die Design Handbook (Translation), Seong An Dang, pp. 412-416