1 |
Umezawa, K. and Ishikawa, J., 1973, 'Deflection Due to Contact Between Gear Teeth with Finite Width,' Bulletin of the JSME, Vol. 16, No. 97, pp. 1085-1093
DOI
|
2 |
South, D. W. and Mancuso, J. R., 1994, Mechanical Power Transmission Components, Marcel Dekker, Inc., pp. 511-531
|
3 |
Huh, G. J., 1991, 'Constrained Variational Approach for Dynamic Analysis of Elastic Contact Problems,' Finite Element in Analysis and Design, Vol. 10, pp. 125-136
DOI
ScienceOn
|
4 |
Sfakiotakis, V. G., Vaitsis, J. P. and Anifantis, N. K., 2001, 'Numerical Simulation of Conjugate Spur Gear Action, Computers & Structures, Vol. 79, No. 12, pp. 1153-1160
DOI
ScienceOn
|
5 |
Stegemiller, M. E., 1993, 'A Three-dimensional Analysis of the Base Flexibility of Gear Teeth,' Transactions of the ASME, Journal of Mechanical Design, Vol. 115, pp. 186-192
DOI
ScienceOn
|
6 |
Van de Panne and Whinstone, A., 1964, 'The Simplex and the Dual Method for Quadratic Programming,' Operational Research Quarterly, Vol. 15, No. 4, pp. 355-388
DOI
|
7 |
Colbourne, J. R., 1987, The Geometry of Involute Gears, Springer-Verlag, New-York, pp. 212-218, 162-163
|
8 |
Wallace, D. B. and Seireg, A.. 1973, 'Computer Simulation of Dynamic Stress, Deformation, and Fracture of Gear Teeth,' Transactions of the ASME, Journal of Engineering for Industry, Vol. 95, No. 4, pp. 1108-1114
DOI
|
9 |
Yau, E., Busby, H. R., and Houser, D. R., 1994, 'A Rayleigh-Ritz Approach to Modeling Bending and Shear Deformation of Gear Teeth,' Computer & Structures, Vol. 50, No. 5, pp. 705-713
DOI
ScienceOn
|
10 |
Kim, H. R. and Ahn, S. J., 1993, 'A Study on the Design and Experiment for the Profile of Lower-Noise Gear Toothm,' Transaction of the KSME, A, Vol. 17, No. 1, pp. 1-10
과학기술학회마을
|
11 |
Fukunaga, K., 1987, 'A Strength Analysis of Spur Gears including Ratio of Contact,' JSME, Transactions Series C, Vol. 53, No. 489, pp. 1071-1076
DOI
|
12 |
Park, C. I. and Lee, J. M., 2002, 'Experimental Investigation of the Effect of Load Errors on Helical Gear and Bearing Vibration Transmission Characteristics,' KSME Int'l journal, Vol. 16, No. 11, pp. 1395-1403
과학기술학회마을
|
13 |
Gagnon, P., Gosselin, C. and Cloutier, L., 1997, 'Analysis of Spur and Straight Bevel Gear Teeth Deflection by the Finite Strip Method,' Transactions of the ASME, Journal of Mechanical Design, Vol. 119, pp. 421-426
DOI
ScienceOn
|