Browse > Article
http://dx.doi.org/10.3795/KSME-A.2003.27.11.1873

A Fundamental Study for the Sliding Wear Characteristics of the Crane Sheave Against a Rope Wire  

Ryu, Jung-Buk (경북대학교 기계공학부)
Chae, Young-Hun (경북대학교 대학원 기계공학과)
Kim, Seock-Sam (경북대학교 트라이볼로지 연구소)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.27, no.11, 2003 , pp. 1873-1880 More about this Journal
Abstract
The sliding wear characteristics of the crane sheave were investigated using a pin on disk rig tester. The experiment was conducted using a high carbon steel wire that was upper material, also carbon steel castings that was disk material. There are various operating conditions in this work. At the room temperature, we carried out the wear test under a grease lubrication and dry condition. The results of wear test showed that an annealed-casted have lower, also the wear curves are linearly increased with increasing of sliding distance. For the specific wear rate of annealed-casted, the wear resistance was increased with decreasing diameter of wire. The wear of a wire and a disk have a different mechanism, the one is the abrasive wear due to fatigue wear under lubrication, another is the adhesion wear under dry condition.
Keywords
Crane; Sheave; Wire-rope; Carbon Steel Castings; High Carbon Steel Wire Rods;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Ridge, I.M.L., Chaplin, C. R. and Zheng, J., 2001, 'Effect of Degradation and Impaired Quality on Wire Rope Bending of Sheave Fatigue Endurance,' Engineering Failure Analysis, pp. 173-187   DOI   ScienceOn
2 Schrems, K. K., 1994, 'Wear-Related Fatigue in a Wire Rope Failure,' Journal of Testing and Evaluation, JTEVA, Vol. 22, No. 5, pp. 490-499   DOI   ScienceOn
3 Endo, K., and Okada, T. and Iwai, Y., 1975, 'Effect of Cold-Working and Grain Size on Wear of Steel,' Proceedings of the JSLE-ASLE International Lubrication Conference, , pp. 92-100
4 Korean Standards Association, 1990, 'Carbon Steel Castings,' KS D 4101, pp. 1-4
5 Verschoof, J., 1999, 'Cranes Design, Practice, and Maintenance,' Professional Engineering Publishing Limited London and Bury St Edmunds, UK, pp. 1-46
6 Korean Standards Association, 1994, 'Rope Sheaves for Electric Overhead Travelling Cranes,' KS B 6407, pp. 1-8
7 Ministy of Labor Republic of Korea, 1994, 'Injury Current Situation,' Home Page
8 Korean Standards Association, 1997, 'Wire Ropes,' KS D 3514, pp. 1-10
9 Batchelor, A. W. and Stachowiak, G. W., 1992, 'Extending the life of Wire Ropes by the Development of Improved Wire Coating and Sheave Materials,' Trans. of Mechanical Engineering, IE Aust., ME17, No.3, pp. 161-169
10 Hamblin, M. G. and Stachowiak, W., 1990, Environmental and Sheave Material Effects on the Wear of Roping Wire and Sheave,' Tribol. Int., Vol. 28, No. 5, pp. 307-315   DOI   ScienceOn
11 Korean Standards Association, 1992, 'High Carbon Steel Wire Rods,' KS D 3559, pp. 1-3
12 Jin-Wook Kim and Young-Ze Lee, 2002, 'The Effect of Residual Stresses on Surface Failure and Wear,' Trans. of the KSME A, Vol. 26, No. 4, pp. 677-682   과학기술학회마을   DOI
13 Jong-Hyun Jung and Dae-un Kim, 1996, 'Effect of Machining Condition on Friction and Wear of Steel,' Trans. of the KSME A, Vol. 20, No. 5, pp. 1468-1476   과학기술학회마을
14 Quinn, T.F.J., Rowson, D.M. and Sullivan, J.L., 1980, 'Application of the Oxidational Theory of Mild Wear to the Sliding Wear of Low Alloy Steel,' Wear, Vol. 65, pp. 1-15   DOI   ScienceOn
15 Lee, R.Y. and Eliezer, Z., 1984, 'On the Critical Thickness of Protective Films at Sliding Interfaces,' Wear, Vol. 95, pp. 165-175   DOI   ScienceOn
16 Han, H. S., Park, I. H. and Kim, J. B., 1994, 'Machine Material,' Crown Publishing Limited of Korea, pp. 269-302
17 Sullivan, J.L. and Hodgson, S.G., 1988, 'A Study of Mild Oxidational Wear for Conditions of Low Load and Speed,' Wear, Vol. 121, pp. 95-100   DOI   ScienceOn
18 Leskovar, I. P., Ferlan, M. Sc. D. and Kovac, I. M., 1987, 'Residual Stresses as Essential Criteria for the Evaluation of Production Processes,' CIRP, Vol. 36, pp. 409-412   DOI   ScienceOn