Browse > Article
http://dx.doi.org/10.5659/JAIK.2022.38.10.241

Insulation Plan and Analysis for Curtain Wall Type PC(Precast Concrete) Outer Wall and Floor Joint of Rahmen Structure Apartment Built with PC for Off-Site Construction  

Joo, Na-Young (Dept. of Architectural & Urban Systems Engineering, Ewha Womans University)
Song, Seung-Yeong (Dept. of Architectural & Urban Systems Engineering, Ewha Womans University)
Publication Information
Journal of the Architectural Institute of Korea / v.38, no.10, 2022 , pp. 241-248 More about this Journal
Abstract
The aim of this study is to find an effective insulation method for the curtain wall type PC(precast concrete) outer wall and floor joint of a rahmen structure apartment built with PC. The insulation performance of the existing case and alternatives in the recently constructed apartment building was evaluated through three-dimensional steady-state heat transfer simulation. As a result, it was found that the existing case needs to reduce thermal bridging effects caused by curtain wall corbels and fastening units and cover the upper fastening unit with sufficient thickness. The first alternative, which moved the position where the curtain wall corbel was supported to the upper part of the girder and sufficiently covered the upper fastening unit, showed that the effective U-factor decreased by 23.5% compared to the existing case. The additional insulation between the curtain wall and the girder of the first alternative reduced the effective U-factor by 32.4%. If the curtain wall corbel is removed, the effective U-factor is reduced by up to 36.3%, but structural analysis is required for field application.
Keywords
Precast Concrete; Curtain Wall; Rahmen Structure; Apartment; Insulation; Thermal Bridge;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 KIAEBS S-13. (2020). Calculation method of thermal performance of thermal bridge breaker applied to thermal bridge in building envelope.
2 Korea Energy Agency. (2020). Commentary of Energy Saving Design Standards of Buildings.
3 Ministry of Land, Infrastructure and Transport(MLIT). (2016). Design Standard for Preventing Condensation in Apartment Buildings.
4 Voellinger, T, Bassi, A & Heitel, M. (2014). Facilitating the incorporation of VIP into precast concrete sandwich panels, Energy and Buildings, 85, 666-671.   DOI
5 ISO. (2017). Thermal bridges in building construction -Heat flows and surface temperatures - Detailed calculation(10211).
6 Lee, J. M.(2022). Trends in revising and enacting codes and standards to boost Off-Site Construction in developed countries - Focusing on BPS 7014 & ICC 1200, 1205 -. Journal of the Architectural Institute of Korea, 38(3), 3-12.   DOI
7 Jeong, M. K., Lee, S. J., Chang, Y. H., & Kwon, S. W.(2021). Smart quality inspection technology for on-site PC members based on Off-Site Construction(OSC). Journal of the Architectural Institute of Korea, 41(1), 745-746.
8 Kim, Y. J., & Allard, A. (2014). Thermal response of precast concrete sandwich walls with various steel connectors for architectural buildings in cold regions, Energy and Buildings, 80, 137-148.   DOI
9 Hwang, E. K., Lee, J. H. & Jung, Y. H. (2017). Improvement direction of legislation for the modular building activation. Journal of the Architectural Institute of Korea, 37(2), 1099-1099.
10 Korea Energy Agency. (2017). Energy Saving Design Standards of Buildings.
11 Jun, Y. H., Kang, T. K., Shin, E. Y., Kim, K. H., & Bae, B. Y.(2021). Deriving factors affecting schedule management in factory production of PC components through case analysis. Journal of the Architectural Institute of Korea, 41(1), 747-748.
12 Zhai, X., Wang, Y., & Wang, X. (2018). Thermal performance of precast concrete sandwich walls with a novel hybrid connector, Energy and Buildings, 166, 109-121.   DOI
13 Joo, N. Y., & Song, S. Y.(2021). Insulation performance comparison of apartment building envelopes composed of reinforced concrete and precast concrete. Journal of the Architectural Institute of Korea, 37(12), 265-275.   DOI
14 Jung, S. Y., & Yu, J. H.(2022). Application of DfMA in OSC projects. Review of Architecture and Building Science, 66(7), 19-21.
15 Choi, B. H., & Song, S. Y. (2021). Insulation performance comparison of curtain wall systems with existing pipe frames and truss-shaped insulation frames, Energies 2021, 14(15), 4682.   DOI
16 ISO. (2017). Thermal performance of buildings -Transmission and ventilation heat transfer coefficients -Calculation method(13789).