Browse > Article
http://dx.doi.org/10.5659/JAIK_SC.2015.31.8.3

The Study on Predicting Method for Evaluating Structural Safety of a School under Fire  

An, Ah Young (이화여대 대학원)
Kim, Hee Sun (이화여대 건축공학과)
Shin, Yeoung Soo (이화여대 건축공학과)
Publication Information
Journal of the Architectural Institute of Korea Structure & Construction / v.31, no.8, 2015 , pp. 3-10 More about this Journal
Abstract
The purpose of this study was to find variables effecting on fire simulation and to evaluate safety of the structural members based on temperature distributions. Toward that goal, fire simulation, transient heat transfer analysis, structural safety evaluation are carried out sequentially using Fire Dynamics Simulator (FDS), ABAQUS 6.10-3, MIDAS 785, respectively. Fire simulation is performed on a 5-story building used for a school, located in Seoul, South Korea. The results of this study were as follows; structural members are exposed spatially non-uniform temperatures which can cause significant eccentric deformation and acceleration of structural damages. Using non-uniform temperatures, reduction ratios of structural performance in structural members are deducted.
Keywords
Fire Simulation; Transient Heat Transfer Analysis; Structural Safety Evaluation; Fire Performance;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 An, A. Y., Ryu, E. M., & Kim, H. S. (2014). Investigations on structural safety of office room based on fire simulation and transient heat transfer analysis, World Journal of Engineering and Technology, 2, 20-26   DOI
2 Andrew H. Buchanan (2001). Structural Design for Fire Safety, JOHN WILEY & SONS, STD, 130
3 Au, S. K., Wang, Z., & Lo, S. (2007). Compartment fire risk analysis by advanced Monte Carlo simulation, Engineering Structures, 29, 2834-2835
4 Bjorn Karlsson, James G. Quintiere (2000). Enclosure Fire Dynamics, CRC Press LLC 2000 N.W. Corporate Blvd., Boca Raton, Florida 33431
5 Choi, E. G. (2008). Performance assessment of high strength concrete members subjected to fire, Ph.D. thesis, Ewha Womans University
6 Choi, J. H. (2008). Concurrent Fire Dynamics Models and Thermomechanical Analysis of Steel and Concrete Structures, Ph.D. Thesis, Georgia Institute of Technology
7 Choi, J. H., Haj-Ali, R. M., & Kim H. S. (2012). Integrated fire dynamic and thermomechanical modeling of a bridge under fire. Structural Engineering and Mechanics, 42
8 Choi, J. H., Kim, H. S., & Haj-Ali, R. M. (2010). Integrated fire dynamic and thermomechanical modeling framework for steel-concrete composite structures. Steel and Composite Structures, 10, 129-135   DOI   ScienceOn
9 Chow, A. U. (2012). Concerns on estimating heat release rate of design fires in fire engineering approach, International Journal on Engineering Performance-Based Fire Codes, 11
10 Eurocode 2 (2004). Design of concrete structures, Part 1-2: General rules-Structural fire design. BS EN 1992-1-2
11 Harmathy, T. Z. (1983). Properties of building materials at elevated temperatures, Division of Building Research, 1080
12 Harmathy, T. Z. (1988). Properties of building materials in SFPE Handbook of fire protection engineering, Ed. Dinenno, 1
13 Karlsson, B., & Quintiere, J. G. (2000). Enclosure Fire Dynamics, CRC Press
14 Kim, H. S., Mun, J. Y., Park, J. S., & Shin, Y. S. (2011). Structural capacity evaluation of high strength concrete short columns with various design parameters under high temperatures, Journal of the Korea Concrete Institute, 23(5), 637-645   DOI   ScienceOn
15 McGrattan, K., Hostikka, S., Floyd, J., Baum, H., Rehm, R. Mell, W., & McDermott, R. (2010). Fire Dynamics Simulator (Version 5) Technical Reference Guide, National Institute of Standards and Technology (NIST), 1, 45-53
16 McGrattan, K., & McDermott, R. (2010). Fire Dynamics Simulator (version 5)-User's Guide, National Institute of Standards and Technology (NIST), 23-26
17 Madrzykowski, D. (1996). Office Work station Heat Release Rate Study; Full Scale vs. Bench Scale, Interflam. Proceedings of 7th International Interflam Conference, 52
18 Shin, Y. S., Park, J. S., Mun, J. Y., & Kim, H. S. (2011). Experimental studies on the effect of various design parameters on thermal behaviors of high strength concrete columns under high temperatures, Journal of the Korea Concrete Institute, 23(3), 377-379   DOI   ScienceOn