1 |
Aidam, N. S. (1990). Analysis of Block Shear Experiments for Structural Steel Anglel in Tension Members MS. Thesis. University of Connecticut.
|
2 |
Aluminum Association. (2000). Aluminum Design Manual, Washington (DC): The Aluminum Association.
|
3 |
Aluminum Association. (2010). Aluminum Design Manual, Washington (DC): The Aluminum Association.
|
4 |
American Institute of Steel Construction (AISC). (2010). Steel Construction Manual. AISC 325-11, Chicago, USA.
|
5 |
American Iron and Steel Institute (AISI). (2012). North American Specification for the Design of Cold-Formed Steel Structural Members, AISI S100-12, Washington D.C., USA.
|
6 |
Architectural Institute of Korea(AIK). (2009). Korea Building Code(KBC2009), Seoul.
|
7 |
Brungraber, R. J. & Clark J. W. (1960). Strength of welded aluminum columns. Journal of Structural Division, ASCE 1960, 33-57.
|
8 |
Chesson, E. & Munse, W. H. (1963). Riveted and bolted joints: Truss type tensile connection. Journal of Structural Engineering, ASCE, 89(1), 67-106.
|
9 |
Cho, Y. H., Choi, Y. C., & Kim, T. S. (2013). A Comparison on the Ultimate Behavior of Bolted Connections with Aluminum Alloys(6061-T6) according to Bolt Shear Loading, Architectural Institute of Korea, AIK, 29(11), 13-20.
|
10 |
Chung, K. R. & Um, K. H. (2004). Structural design and construction of aluminum dome for Yong-san station, Korean association of spatial structures, 4(4), 15-19.
|
11 |
Howard, I. E. (1992). An Experimental Study of Block Shear Failure of Angles in Tension, AISC Engineering Journal. 2nd Qtr., 75-84.
|
12 |
IS:800. (2007). Indian Standard Code of Practice for general Construction in Steel, India.
|
13 |
Kang, H. S. & Kim, T. S. (2015). An Experimental Study on Ultimate Strength of Aluminum Alloy Single Shear Bolted Connections with Curling Influence, Architectural Institute of Korea, AIK, 31(4), 71-78.
DOI
|
14 |
Kim T. S. (2013). An Experimental Study on Structural Behaviors of Single Shear Bolted Connections with Thin-Walled Aluminum Alloys(6061-T6), Architectural Institute of Korea, AIK, 29(6), 49-56.
|
15 |
Korean Standard(KS) (2011). Aluminium and aluminium alloy extruded shapes, Korean Standards, KS D 6759, Seoul, Korea.
|
16 |
Usha. (2003). Analytical study of nonlinear behavior of steel angle tension members. MS thesis, Indian Institute of Technology, Madras.
|
17 |
Lee, E. T., Kim, J. H., Park, J. Y., & Lee, H. H. (2004). Block Shear Rupture and Shear Lag of Single angle in Tension Joint, Architectural Institute of Korea, AIK, 20(11), 19-26.
|
18 |
Munse, W. H. & Chesson, E. (1963). Riveted and bolted joints: Net section design. Journal of Structural Engineering, ASCE, 89(1), 107-126.
|
19 |
Prabha, P. & Jayachandran, S. A. (2011). Prediction of the tensile capacity of cold formed angles experiencing shear lag, Thin-Walled Structures, 49, 1348-1358.
DOI
|
20 |
Wang, C. & Menzemer, C. C. (2005). Shear Lag in Bolted Single Aluminum Angle Tension members, Journal of materials Engineering and Performance, 14(1), 61-68.
DOI
|
21 |
Wu, Y. & Kulak, G. L. (1993). Shear Lag in Bolted Single and Double Angle Tension Members, Structural Engineering Report 187, Department of Civil Engineering, University of Alberta, Edmonton, Alberta.
|