Browse > Article
http://dx.doi.org/10.9714/psac.2022.24.4.040

Effects of surface-roughness and -oxidation of REBCO conductor on turn-to-turn contact resistance  

Y.S., Chae (Department of Electrical Engineering, Jeju National University)
H.M., Kim (Department of Electrical Engineering, Jeju National University)
Y.S., Yoon (Department of Electrical Engineering, Shin Ansan University)
T.W., Kim (Material Technology Center, Korea Testing Laboratory)
J.H., Kim (Electric Energy Research Center, Jeju National University)
S.H., Lee (Electric Energy Research Center, Jeju National University)
Publication Information
Progress in Superconductivity and Cryogenics / v.24, no.4, 2022 , pp. 40-45 More about this Journal
Abstract
The electrical/thermal stabilities and magnetic field controllability of a no-insulation (NI) high-temperature superconducting magnet are characterized by contact resistance between turn-to-turn layers, and the contact resistance characteristics are determined by properties of conductor surface and winding tension. In order to accurately predict the electromagnetic characteristics of the NI coil in a design stage, it is necessary to control the contact resistance characteristics within the design target parameters. In this paper, the contact resistance and critical current characteristics of a rare-earth barium copper oxide (REBCO) conductor were measured to analyze the effects of surface treatment conditions (roughness and oxidation level) of the copper stabilizer layer in REBCO conductor. The test samples with different surface roughness and oxidation levels were fabricated and conductor surface analysis was performed using scanning electron microscope, alpha step surface profiler and energy dispersive X-ray spectroscopy. Moreover, the contact resistance and critical current characteristics of the samples were measured using the four-terminal method in a liquid nitrogen impregnated cooling environment. Compared with as-received REBCO conductor sample, the contact resistance values of the REBCO conductors, which were post-treated by the scratch and oxidation of the surface of the copper stabilizer layer, tended to increase, and the critical current values were decreased under certain roughness and oxidation conditions.
Keywords
contact resistance; no-insulation REBCO coil; surface oxidation; surface roughness;
Citations & Related Records
Times Cited By KSCI : 14  (Citation Analysis)
연도 인용수 순위
1 J. Kim, et al ., "Effect of resistive metal cladding of HTS tape on the characteristic of no-insulation coil," IEEE Trans. Appl. Supercond., vol. 26, no. 4, pp. 4601906, 2016.
2 K. Kim, et al., "Quench behavior of a no-insulation coil wound with stainless steel cladding REBCO tape at 4.2 K," Supercond. Sci. Technol., vol. 30, no. 7, pp. 075001, 2017.
3 Y. S. Choi, D. L. Kim, and S. Y. Hahn, "Progress on the development of a 5 T HTS insert magnet for GHz class NMR applications," IEEE Trans. Appl. Supercond., vol. 21, no. 3 PART 2, pp. 1644-1648, 2011.   DOI
4 S. B. Kim, A. Saitou, J. H. Joo, and T. Kadota, "The normal-zone propagation properties of the non-insulated HTS coil in cryocooled operation," Phys. C Supercond. its Appl., vol. 471, no. 21-22, pp. 1428-1431, 2011.   DOI
5 S. B. Kim, et al., "The characteristics of the normal-zone propagation of the HTS coils with inserted Cu tape instead of electrical insulation," IEEE Trans. Appl. Supercond., vol. 22, no. 3, pp. 4701504, 2012.
6 S. B. Kim, et al., "The study on improving the self-protection ability of HTS coils by removing the insulation and lamination of the various metal tapes," Phys. C Supercond. its Appl., vol. 484, pp. 310-315, 2013.   DOI
7 S. Hahn, et al., "A 78-mm/7-T multi-width no-insulation ReBCO magnet: Key concept and magnet design," IEEE Trans. Appl. Supercond., vol. 24, no. 3, pp. 4602705, 2014.
8 H. L. Quach and H. M. Kim, "A study on charging and electrical stability characteristics with no-insulation and metal insulation in form of racetrack type coils," Prog. Supercond. Cryog., vol. 22, no. 3, pp. 13-19, 2020.   DOI
9 Y. S. Chae, J. H. Kim, H. L. Quach, Y. S. Yoon, and H. M. Kim, "Electromagnetic characteristic analysis of a REBCO magnet with a current bypass/distribution winding technique under an asynchronous rotating magnetic field," Supercond. Sci. Technol., vol. 35, no. 4, pp. 045017, 2022.
10 H. L. Quach, et al., "Effects of stainless steel thickness and winding tension on electrical and thermal characteristics of metal insulation racetrack coils for 10-MW-class HTS wind generator," Cryogenics, vol. 115, pp. 103256,
11 K. L. Kim, et al., "Effect of winding tension on electrical behaviors of a no-insulation ReBCO pancake coil," IEEE Trans. Appl. Supercond., vol. 24, no. 3, pp. 4600605, 2014.
12 M. -H. Sohn, et al., "Controllability of the contact resistance of 2G HTS coil with metal insulation," IEEE Trans. Appl. Supercond., vol. 28, no. 3, pp. 4602705, 2018.
13 O. J. Kwon, et al., "Effects of turn-to-turn compactness in the straight sections of HTS racetrack coils on thermal and electrical characteristics," Supercond. Sci. Technol., vol. 26, no. 8, pp. 085025, 2013.
14 M. Bonura, et al., "Systematic study of the contact resistance between REBCO tapes: pressure dependence in the case of no-insulation, metal co-winding and metal-insulation," IEEE Trans. Appl. Supercond., vol. 29, no. 5, pp. 6600305, 2019.
15 J. Lu, J. Levitan, D. McRae, and R. Walsh, "Contact resistance between two REBCO tapes: the effects of cyclic loading and surface coating," Supercond. Sci. Technol., vol. 31, no. 8, pp. 085006, 2018.
16 J. Lu, et al., "Contact resistivity due to oxide layers between two REBCO tapes," Supercond. Sci. Technol., vol. 31, no. 8, pp. 085006, 2018.
17 K. L. Kim, et al., "Analytical and empirical studies on the characteristic resistances of no-insulation GdBCO racetrack pancake coil under various operating currents," Curr. Appl. Phys., vol. 15, no. 1, pp. 8-13, 2015.   DOI
18 S. Hahn, D. K. Park, J. Bascu˜n'an, and Y. Iwasa, "HTS pancake coils without turn-to-turn insulation," IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1592-1595, 2011.   DOI
19 Y. G. Kim, S. Hahn, K. L. Kim, O. J. Kwon, and H. G. Lee, "Investigation of HTS racetrack coil without turn-to-turn insulation for superconducting rotating machines," IEEE Trans. Appl. Supercond., vol. 22, no. 3, pp. 5200604, 2012.
20 S. Hahn, et al., "No-insulation coil under time-varying condition: Magnetic coupling with external coil," IEEE Trans. Appl. Supercond., vol. 23, no. 3, pp. 4601705, 2013.
21 Y. H. Choi, et al., "Thermal quench behaviors of no-insulation coils wound using GdBCO coated conductor tapes with various lamination materials," IEEE Trans. Appl. Supercond., vol. 24, no. 3, pp. 8800105, 2014.
22 S. Noguchi, et al., "Experiment and simulation of impregnated no-insulation REBCO pancake coil," IEEE Trans. Appl. Supercond., vol. 26, no. 4, pp. 4601305, 2016.
23 H. L. Quach, et al., "Analysis on electrical and thermal characteristics of a no-insulation HTS coil considering heat generation in steady and transient states," IEEE Trans. Appl. Supercond., vol. 29, no. 5, pp. 4701506, 2019.
24 Y-G. Kim, et al., "Numerical analysis on bifurcated current flow in no-insulation magnet," IEEE Trans. Appl. Supercond., vol. 24, no. 3, pp. 4900404, 2014.
25 H. L. Quach, et al., "Analytical and numerical simulation on charging behavior of no-insulation REBCO pancake coil," Prog. Supercond. Cryog., vol. 20, no. 4, pp. 16-19, 2018.
26 W. -J. Lee and X. -J. Wang, "Structural, optical, and electrical properties of copper oxide films grown by the SILAR method with post-annealing", Coatings, vol. 11, no. 7, pp. 864, 2021. 
27 L. De Los Santos Valladares, et al., "Crystallization and electrical resistivity of Cu2O and CuO obtained by thermal oxidation of Cu thin films on SiO2/Si substrates", Thin Solid Films, vol. 520, no. 20, pp. 6368-6374, 2012.   DOI