Protection properties of HTS coil charging by rotary HTS flux pump in charging and compensation modes |
Han, Seunghak
(Department of Electrical and Electronic Engineering, Yonsei University)
Kim, Ji Hyung (Department of Electrical Engineering, Jeju National University) Chae, Yoon Seok (Department of Electrical Engineering, Jeju National University) Quach, Huu Luong (Department of Electrical Engineering, Jeju National University) Yoon, Yong Soo (Department of Electrical Engineering, Shin Ansan University) Kim, Ho Min (Department of Electrical Engineering, Jeju National University) |
1 | H. Jeon et al., "PID Control of an Electromagnet-Based Rotary HTS Flux Pump for Maintaining Constant Field in HTS Synchronous Motors," IEEE Trans. Appl. Supercond., vol. 28, no. 4, Jun. 2018, Art. no. 5207605. |
2 | C. Hoffmann, D. Pooke, and A. D. Caplin, "Flux pump for HTS magnets," IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1628-1631, Jun. 2011. DOI |
3 | Z. Jiang, C. W. Bumby, R. A. Badcock, H. J. Sung, and R. A. Slade, "A novel rotating HTS flux pump incorporating a ferromagnetic circuit," IEEE Trans. Appl. Supercond., vol. 26, no. 2, Mar. 2016, Art. no. 4900706. |
4 | S. Lee et al., "Persistent Current Mode Operation of A 2G HTS Coil with A Flux Pump," IEEE Trans. Appl. Supercond., vol. 26, no. 4, Jun. 2016, Art. no. 0606104. |
5 | S. Han et al., "Charging Characteristics of Rotary HTS Flux Pump with Several Superconducting Wires," IEEE Trans. Appl. Supercond., vol. 29, no. 5, Aug. 2019, Art. no. 0603605. |
6 | J. H. Kim et al., "Fabrication and performance testing of a 1-kW-high-temperature superconducting generator with a high-temperature superconducting contactless field exciter," Supercond. Sci. Technol., vol. 33, Jul. 2020, Art. no. 095003. |
7 | K. L. Kim et al., "Analytical and empirical studies on the characteristic resistances of no-insulation GdBCO racetrack pancake coil under various operating currents," Curr. Appl. Phys., vol. 15, no. 1, pp. 8-13, Jan. 2015. DOI |
8 | Z Jiang, C. W. Bumby, R. A. Badcock, H.-J. Sung, N. J. Long, and N. Amemiya, "Impact of flux gap upon dynamic resistance of a rotating HTS flux pump," Supercond. Sci. Technol., vol. 28, no. 11, Sep. 2015, Art. no. 115008. |
9 | J. Geng et al., "Origin of dc voltage in type II superconducting flux pumps: Field, field rate of change, and current density dependence of resistivity," J. Phys. D, Appl. Phys., vol. 49, no. 11, 2016, Art. no. 11LT01. |
10 | Z. Jiang, K. Hamilton, N. Amemiya, R. A. Badcock, and C. W. Bumby, "Dynamic resistance of a high-Tc superconducting flux pump," Appl. Phys. Lett., vol. 105, 2014, Art. no. 112601. |
11 | H. Jeon et al., "Methods for increasing the saturation current and charging speed of a rotary HTS flux-pump to charge the field coil of a synchronous motor," IEEE Trans. Appl. Supercond., vol. 28, no. 3, Apr. 2018, Art. no. 5202605. |
12 | Y. H. Choi, S. G. Kim, S. H. Jeong, J. H. Kim, H. M. Kim, and H. Lee, "A Study on Charge-Discharge Characteristics of No-Insulation GdBCO Magnets Energized via a Flux Injector," IEEE Trans. Appl. Supercond., vol. 27, no. 4, Jun. 2017, Art. no. 4601206. |
13 | S. Hahn et al., "No-insulation coil under time-varying condition: Magnetic coupling with external coil," IEEE Trans. Appl. Supercond., vol. 23, no. 3, Jun. 2013, Art. no. 4601705. |
14 | W. Yao, J. Bascunan, S. Hahn, and Y. Iwasa, "MgB2 coils for MRI applications," IEEE Trans. Appl. Supercond., vol. 20, no. 3, pp. 756-759, Jun. 2010. DOI |
15 | H. Jeon et al., "Methods for Increasing the Saturation Current and Charging Speed of a Rotary HTS Flux-Pump to Charge the Field Coil of a Synchronous Motor," IEEE Trans. Appl. Supercond., vol. 28, no. 3, Apr. 2018, Art. no. 5202605. |
16 | C. Lacroix and F. Sirois, "Corrigendum: Concept of a current flow diverter for accelerating the normal zone propagation velocity in 2G HTS coated" Supercond. Sci. Technol., vol. 27, no. 12, 2014, Art. no. 035003. |
17 | Y. Iwasa et al., "Stability and quench protection of coated YBCO 'composite' tape," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 1683-1686, Jun. 2005. DOI |
18 | J. H. Kim et al., "Effects of stabilizer thickness of 2G HTS wire on the design of a 1.5-MW-class HTS synchronous machine," IEEE Trans. Appl. Supercond., vol. 26, no. 4, Jun. 2016, Art. no. 5206705. |
19 | H. J. Shin et al., "A study on cooling performances and over-current behaviors of GdBCO coils with respect to epoxy impregnation method," IEEE Trans. Appl. Supercond., vol. 25, no. 3, Jun. 2015, Art. no. 4602105. |
20 | Y. H. Choi et al., "Thermal quench behaviors of no-insulation coils wound using GdBCO coated conductor tapes with various lamination materials," IEEE Trans. Appl. Supercond., vol. 24, no. 3, Jun. 2014, Art. no. 8800105. |
21 | H. Song, K. Gagnon, and J. Schwartz, "Quench behavior of conduction-cooled y Ba2Cu3O 7-δ coated conductor pancake coils stabilized with brass or copper," Supercond. Sci. Technol., vol. 23, no. 6, 2010, Art. no. 065021. |
22 | H. Maeda and Y. Yanagisawa, "Recent Developments in High-Temperature Superconducting Magnet Technology (Review)," IEEE Trans. Appl. Supercond., vol. 24, no. 3, Jun. 2014, Art. no. 4602412. |
23 | S. Liu, L. Ren, J. Li, and Y. Tang, "Analysis of quench propagation characteristics of the YBCO coated conductor," Phys. C Supercond. its Appl., vol. 471, no. 21-22, pp. 1080-1082, 2011. DOI |
24 | H. Y. Park et al., "Analysis of temperature dependent quench characteristics of the YBCO coated conductor," IEEE Trans. Appl. Supercond., vol. 20, no. 3, pp. 2122-2125, Jun. 2010. DOI |
25 | C. W. Bumby, Z. Jiang, J. G. Storey, A. E. Pantoja, and R. Badcock, "Anomalous open-circuit voltage from a high-Tc superconducting dynamo," Appl. Phys. Lett., vol. 108, 2016, Art. no. 122601. |
26 | A. E. Pantoja, Z. Jiang, R. A. Badcock, and C. W. Bumby, "Impact of Stator Wire Width on Output of a Dynamo-Type HTS Flux Pump," IEEE Trans. Appl. Supercond., vol. 26, no. 8, Dec. 2016, Art. no. 4805208. |
27 | Y. G. Kim, S. Hahn, K. L. Kim, O. J. Kwon, and H. G. Lee, "Investigation of HTS racetrack coil without turn-to-turn insulation for superconducting rotating machines," IEEE Trans. Appl. Supercond., vol. 22, no. 3, Jun. 2012, Art. no. 5200604. |
28 | L. A. Angurel et al., "Quench detection in YBa2 Cu3 O7-δ coated conductors using interferometric techniques," J. Appl. Phys., vol. 104, no. 9, Nov. 2008, Art. no. 093916. |
29 | D. Uglietti and C. Marinucci, "Design of a quench protection system for a coated conductor insert coil," IEEE Trans. Appl. Supercond., vol. 22, no. 3, Jun. 2012, Art. no. 4702704. |
30 | S. B. Kim et al., "The study on improving the self-protection ability of HTS coils by removing the insulation and lamination of the various metal tapes," Phys. C Supercond. its Appl., vol. 484, pp. 310-315, 2013. DOI |
31 | D. W. Hazelton et al., "Recent developments in 2G HTS coil technology," IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 2218-2222, Jun. 2009. DOI |
32 | Y. S. Choi, D. L. Kim, and S. Y. Hahn, "Progress on the development of a 5 T HTS insert magnet for GHz class NMR applications," IEEE Trans. Appl. Supercond., vol. 21, no. 3 PART 2, pp. 1644-1648, Jun. 2011. DOI |
33 | S. Lee et al., "Persistent Current Mode Operation of A 2G HTS Coil with A Flux Pump," IEEE Trans. Appl. Supercond., vol. 26, no. 4, Jun. 2016, Art. no. 0606104. |
34 | S. B. Kim et al., "The characteristics of the normal-zone propagation of the HTS coils with inserted Cu tape instead of electrical insulation," IEEE Trans. Appl. Supercond., vol. 22, no. 3, Jun. 2012, Art. no. 4701504. |
35 | H. Jeon et al., "PID Control of an Electromagnet-Based Rotary HTS Flux Pump for Maintaining Constant Field in HTS Synchronous Motors," IEEE Trans. Appl. Supercond., vol. 28, no. 4, Jun. 2018, Art. no. 5207605. |
36 | S. Han et al., "Degradation of critical current in an HTS coated conductor considering curvature of ellipse for rotating flux pump," Adv. Cryogenic Engr., vol. 89, pp. 141-146, Jan 2018. |
37 | S. B. Kim, A. Saitou, J. H. Joo, and T. Kadota, "The normal-zone propagation properties of the non-insulated HTS coil in cryocooled operation," Phys. C Supercond. its Appl., vol. 471, no. 21-22, pp. 1428-1431, 2011. DOI |
38 | D. Colangelo and B. Dutoit, "Impact of the normal zone propagation velocity of high-temperature superconducting coated conductors on resistive fault current limiters," IEEE Trans. Appl. Supercond., vol. 25, no. 2, Apr. 2015, Art. no. 5601708. |
39 | Y. Iwasa, Case Studies in Superconducting Magnets: Design and Operational Issues, 2nd ed. New York, NY, USA: Springer-Verlag, 2009, pp. 496-505. |
40 | S. Hahn et al., "A 78-mm/7-T multi-width no-insulation ReBCO magnet: Key concept and magnet design," IEEE Trans. Appl. Supercond., vol. 24, no. 3, Jun. 2014, Art. no. 4602705. |
41 | S. Hahn, D. K. Park, J. Bascunan, and Y. Iwasa, "HTS pancake coils without turn-to-turn insulation," IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1592-1595, Jun. 2011. DOI |
42 | Chris W Bumby et al., "Development of a brushless HTS exciter for a 10kW HTS synchronous generator," Supercond. Sci. Technol., vol. 29, no. 2, 2016, Art. no 024008. |