Browse > Article
http://dx.doi.org/10.7464/ksct.2017.23.3.223

A Technical Review on the Protective Measures of High Temperature Corrosion of Boiler Heat Exchangers with Additives  

Kim, Beomjong (School of mechanical Engineering, Sungkyunkwan University)
Ryu, Changkook (School of mechanical Engineering, Sungkyunkwan University)
Lee, Uendo (Thermochemical Energy System R&BD Group, Korea Institute of Industrial Technology)
Kim, Youngdoo (Thermochemical Energy System R&BD Group, Korea Institute of Industrial Technology)
Lee, Jeongwoo (Hansol SeenTec)
Song, Jaehun (Hansol SeenTec)
Publication Information
Clean Technology / v.23, no.3, 2017 , pp. 223-236 More about this Journal
Abstract
As the use of waste and biomass increases in a power generation boiler, high temperature corrosion (HTC) problems of boiler heat exchangers are becoming very important. Chlorine of the low-rank fuels is mainly responsible for the HTC issues, which typically occur in the surface of high temperature heat exchanger like a superheater or reheater. In order to mitigate the problem, various approaches have been proposed in terms of design modification, material improvement, fuel pre-treatment and additive utilization. In this study, the current state of research and development focused on the additive method was investigated.
Keywords
High temperature corrosion; Biomass and waste; Chloride; Sulfate additives; Boiler;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Viklund, P., "Superheater Corrosion in Biomass and Waste Fired Boilers," KTH, Ph.D Thesis, (2013).
2 Lee, D.-B., "High-Temperature Corrosion by Chlorides in Biomass-Fired Plants," J. The Korean Inst. Surface Eng., 49(1), 14-19 (2016).   DOI
3 Wang, L., Hustad, J. E., Skeriberg, O., Skjevrak, G., and Gronli, M., "A critical Review on Additives to Reduce Ash Related Operation Problems in Biomass Combustion Applications," Energy Procedia, 20, 20-29 (2012).   DOI
4 Fernandez Llorente, M. J., Diaz Arocas, P., Gutierrez Nebot, L., and Carrasco Garcia, J. E., "The Effect of the Addition of Chemical Materials on the Sintering of Biomass Ash," Fuel, 87(12), 2651-2658 (2008).   DOI
5 Kyi, S., and Chadwick, B. L., "Screening of Potential Mineral Additives for use as Fouling Preventatives in Victorian Brown Coal Combustion," Fuel, 78, 845-855 (1999).   DOI
6 Uberoi, M., Punjak, W. A., and Shadman, F., "The Kinetics and Mechanism of Alkali Removal from Flue Gases by Solid Sorbents," Prog. Energy and Combust. Sci., 16(4), 205-211 (1990).   DOI
7 Wang, L., Skjevrak, G., Hustad, J. E., and Gronli, M. G., "Effects of Sewage Sludge and Marble Sludge Addition on Slag Characteristics during Wood Waste Pellets Combustion," Energy & Fuels, 25, 5775-5785 (2011).   DOI
8 Pettersson, A., Amand, L. E., and Steenari, B. M., "Chemical Fractionation for the Characterization of Fly Ashes from Co-Combustion of Biofuels using Different Methods for Alkali Reduction," Fuel, 88, 1758-1772 (2009).   DOI
9 Amand, L. E., Leckner, B., Eskilsson, D., and Tullin, C., "Deposits on Heat Transfer Tubes during Co-Combustion of Biofuels and Sewage Sludge," Fuel, 85(10-11), 1313-1322 (2006).   DOI
10 Elled, A. L., Davidsson, K. O., and Amand, L. E., "Sewage Sludge as a Deposit Inhibitor when Co-Fired with High Potassium Fuels," Biomass and Bioenergy, 34, 1546-1554 (2010).   DOI
11 Wang, L., Skjevrak, G., Hustad, J., E., and Gronli, M. G., "Sintering Characteristics of Sewage Sludge Ashes at Elevated Temperatures," Fuel Proc. Technol., 96, 88-97 (2012).   DOI
12 Bale, C. W., Belisle, E., Chartrand, P., Decterov, S. A., Eriksson, G., Hack, K., Jung, I. -H., Kang, Y. -B., Melancon, J., Pelton, A. D., Robelin, C., and Petersen, S., "FactSage Thermochemical Software and Databases - Recent Developments," CALPHAD 33(2), 295-311 (2009).   DOI
13 Pettersson, J., Pettersson, C., Folkeson, N., Johansson, L.-G., Skog, E., and Svensson, J.-E., "The Influence of Sulphur Additions on the Corrosive the Environment in a Waste-Fired CFB Boiler," Mater. Sci. Forum, 522-523, 563-570 (2006).   DOI
14 Kawahara, Y., "High temperature Corrosion Mechanisms and Effect of Alloying Elements for Materials used in Waste Incineration Environment," Corrosion Sci., 44(2), 223-245 (2002).   DOI
15 Henderson, P., Szakalos, P., Pettersson, R., Andersson, C., and Hogberg, J., "Reducing Superheater Corrosion in Wood-Fired Boilers," Mater. and Corrosion, 57(2), 128-134 (2006).   DOI
16 Dean, J. A., "Lange's Handbook of Chemistry," Fifteenth Edition: McGraw-Hill, (1999).
17 Reese, E., and Grabke, H. J., "Einfluss von Chloriden auf Die Oxidation des 2 1/4 Cr-1 Mo-Stahls," Mater. and Corrosion, 43(12), 547-557 (1992).   DOI
18 Reese, E., and Grabke, H. J., "Einfluss von Natriumchlorid auf Die Oxidation von Hochlegierten Chrom- und Chrom-Nickel-Stahlen," Mater. and Corrosion, 44(2), 41-47 (1993).   DOI
19 Steenari, B. M., Lundberg, A., Pettersson, H., Wilewska-Bien, M., and Andersson, D., "Investigation of Ash Sintering during Combustion of Agricultural Residues and the Effect of Additives," Energy Fuels, 23(11), 5655-5662 (2009).   DOI
20 Steenari, B. M., and Lindqvist, O., "High-temperature Reactions of Straw Ash and the Anti-Sintering Additives Kaolin and Dolomite," Biomass and Bioenergy, 14(1), 67-76 (1998).   DOI
21 Jimenez, S., and Ballester, J., "Formation of Alkali Sulphate Aerosols in Biomass Combustion," Fuel, 86, 486-493 (2007).   DOI
22 Aho, M., Vainikka, P., Taipale, R., and Yrjas, P., "Effective New Chemicals to Prevent Corrosion due to Chlorine in Power Plant Superheaters," Fuel, 87, 647-654 (2008).   DOI
23 Brostrom, M., Kassams, H., Helgesson, A., Berg, M., Andersson, C., Backman, R., and Nordin, A., "Sulfation of Corrosive Alkali Chlorides by Ammonium Sulfate in a Biomass Fired CFB Boiler," Fuel Proc. Technol., 88, 1171-1177 (2007).   DOI
24 Jimenez, S., and Ballester, J., "Influence of Operating Conditions and the Role of Sulfur in the Formation of Aerosols from Biomass Combustion," Combust. and Flame, 140, 346-358 (2005).   DOI
25 Thy, P., Jenkins, B. M., Grundvig, S., Shiraki, R., and Lesher, C. E., "High Temperature Elemental Losses and Mineralogical Changes in Common Biomass Ashes," Fuel, 85, 783-795 (2006).   DOI
26 Thy, P., Lesher, C. E., and Jenkins, B. M., "Experimental Determination of High-Temperature Elemental Losses from Biomass Slag," Fuel, 79(6), 693-700 (2000).   DOI
27 Wu, H., Glarborg, P., Frandsem, F. J., Dam-Johansen, K., and Jensen, P. A., "Dust-Firing of Straw and Additives: Ash Chemistry and Deposition Behavior," Energy & Fuels, 25, 2862-2873 (2011).   DOI
28 Lindstrom, E., Sandstrom, M., Bostrom, D., and Ohman, M., "Slagging Characteristics during Combustion of Cereal Grains Rich in Phosphorus," Energy & Fuels, 21(2), 710-717 (2007).   DOI
29 Gilbe, C., Ohman, M., Lindstrom, E., Bostrom, D., Backman, R., Samuelsson, R., and Burvall, J., "Slagging Characteristics during Residential Combustion of Biomass Pellets," Energy and Fuels, 22(5), 3536-3543 (2008).   DOI
30 Grimm, A., Skoglund, N., Bostrom, D., and Ohman, M., "Bed Agglomeration Characteristics in Fluidized Quartz Bed Combustion of Phosphorus-Rich Biomass Fuels," Energy Fuels, 25(3), 937-947 (2011).   DOI
31 Kassman, H., Normann, F., and Amand, L. E., "The Effect of Oxygen and Volatile Combustible on the Sulphation of Gaseous KCl," Combust. and Flame, 160, 2231-2241 (2013).   DOI
32 Glaborg, P., and Marshall, P., "Mechanism and Modeling of the Formation of Gaseous Alkali Sulfates," Combust. and Flame, 141(1-2), 22-39 (2005).   DOI
33 Aho, M., Silvennoinen, J., "Preventing Chlorine Deposition on Heat Transfer Surfaces with Aluminium - Silicon Rich Biomass Residue and Additive," Fuel, 83, 1299-1305 (2004).   DOI
34 Wu, H., Jespersen, J. B., Aho, M., Paakkinen, K., Taipale, R., Frandsen, F. J., and Glarborg, P., "Modeling of Sulfation of Potassium Chloride by Ferric Sulfate Addition during Grate-firing of Biomass," International Flame Research Foundation, (2013).
35 Yrjas, P., "FBC Challenges : Current Research at AA-University," 71st IEA-FBC (2015).
36 Kassman, H., Bafver, L., and Amand, L. E., "The Importance of $SO_2$ and $SO_3$ for Sulphation of Gaseous KCl - An Experimental Investigation in a Biomass Fired CFB Boiler," Combust. and Flame, 157, 1649-1657 (2010).   DOI
37 Andersson, S., Blomqvist, E. W., Bafver, L., Jones, F., Davidsson, K., Froitzheim, J., Karlsson, M., Larsson, E., and Liske, J., "Sulfur Recirculation for Increased Electricity Production in Waste-to-Energy Plants," Waste Manage., 34, 67-78 (2014).   DOI
38 Paneru, M., Maier, J., and Scheffknecht, G., "Mineral Additives to Mitigate Deposition and Corrosion Problems during Pulverized Biomass Combustion," Impacts of Fuel Quality on Power Production, 26th International Conference, Prague (Sep. 2016).
39 Tobiasen, L., Skytte, R., Pedersen, L. S., Pedersen, S. T., and Lindberg, M. A., "Deposit Characteristic after Injection of Additives to a Danish Straw-Fired Suspension Boiler," Fuel Proc. Technol., 88(11-12), 1108-1117 (2007).   DOI
40 Hindiyart, L., Frandsen, F., Livbjerg, H., Glarborg, P., and Marshall, P., "An Exploratory Study of Alkali Sulfate Aerosol Formation during Biomass Combustion," Fuel, 87(8-9), 1591-1600 (2008).   DOI
41 Wang, G., Jensen, P. A., Wu, Hao., Frandsen, F. J., Sander, B., and Glarbog, P., "K-capture by al-si based Additives in an Entrained Flow Reactor," Impacts of Fuel Quality on Power Production, 26th International Conference, Prague (Sep. 2016).
42 Tillman, D. A., Duong, D., and Miller, B., "Chlorine in Solid Fuels Fired in Pulverized Fuel Boilers - Sources, Forms, Reactions, and Consequences: a Literature Review," Energy & Fuels, 23, 3379-3391 (2009).   DOI
43 Glazer, M., "Practical Experiences with Mitigating HT Corrosion by the ChlorOut Concept in Full Scale Boilers," International workshop on High Temperature Corrosion in Biomass Installations (2014).
44 Hjornhede, A., "Reduction of Furnace Wall Corrosion by the use of Fuel Additives Tests in Fluidised Bed Test Rig with Waste and Demolition Wood," International workshop on High Temperature Corrosion in Biomass Installations (2014).
45 Sharp, S., "Could Biomass Boilers be Operated at Higher Steam Efficiencies (Higher Temps.)?," International Workshop on High Temperature Corrosion in Biomass Installations (2014).
46 Rahim, M. U., Gao, X., and Wu, H., "Release of Chlorine from the Slow Pysolysis of NaCl-loaded Cellulose at Low Temperatures," Proc. Combust. Inst., 35, 2891-2896 (2015).   DOI
47 Leckner, B., "Properties and Refinements of Biomass Fuels" III Joint Korean-Swedish Workshop for Research on Application of Fluidized Bed, Chang Won City, Korea (2011).
48 Johansson, L-G., "Critical High Temperature Corrosion Issues in Biomass-Fired Powerplants," International workshop on High Temperature Corrosion in Biomass Installations, Jonkoping, Sweden (2014).
49 Zhang, S., Mohamad, A., Rosalie, H., Lin, J. Y., and Li, C. Z., "Transformation of Chlorine in NaCl-loaded Victorian Brown Coal during the Gasification in Steam," J. Fuel Chem, and Tecjnology, 40(12), 1409-1414 (2012).   DOI
50 Blasing, M., Nazeri, K., and Muller, M., "Release of Alkali Metal, Sulphur and Chlorine Species during High-Temperature Gasification and Co-Gasification of Hard Coal, Refinery Residue, and Petroleum Coke," Fuel, 126, 62-68 (2014).   DOI
51 Forsberg, C., Brostrom, M., Backman, R., Edvardsson, E., Badiel, S., Berg, M., and Kassman, H., "Principle, Calibration, and Application of the in Situ Alkali Chloride Monitor," Rev. of Sci. Instruments, 80, (2009).
52 Vainio, E., Fleig, D., Brink, A., Andersson, K., Johnsson, F. and Hupa, M., "Experimental Evaluation and Field Application of a Salt Method for $SO_3$ Measurement in Flue Gases," Energy Fuel, 27, 2767-2775 (2013).   DOI