Browse > Article

IN VITRO EVALUATION OF FRACTURE RESISTANCE OF VARIOUS THICKNESS FIBER- REINFORCED COMPOSITE INLAY FPD  

Yi Yang-Jin (Dept. of Prosthodontics, College of Dentistry, Kangnung National University, and Research Institute of Oral Science)
Yoon Dong-Jin (NDE Lab., Korea Research Institute of Standards and Science)
Park Chan-Jin (Dept. of Prosthodontics, College of Dentistry, Kangnung National University, and Research Institute of Oral Science)
Cho Lee-Ra (Dept. of Prosthodontics, College of Dentistry, Kangnung National University, and Research Institute of Oral Science)
Publication Information
The Journal of Korean Academy of Prosthodontics / v.41, no.6, 2003 , pp. 762-771 More about this Journal
Abstract
Statement of problem. In dentistry, the minimally prepared inlay resin-bonded fixed partial denture (FPD) made of new ceromer / fiber-reinforced composite (FRC) was recently introduced. However, the appropriate dimensions for the long-term success and subsequent failure strength are still unknown. Purpose. The aim of this study was to investigate the most fracture-resistible thickness combination of the ceromer / FRC using a universal testing machine and an AE analyzer. Material and Methods. A metal jig considering the dimensions of premolars and molars was milled and 56-epoxy resin dies, which had a similar elastic modulus to that of dentin, were duplicated. According to manufacturer's instructions, the FRC beams with various thicknesses (2 to 4 mm) were constructed and veneered with the 1 or 2 mm-thick ceromers. The fabricated FPDs were luted with resin cement on the resin dies and stored at room temperature for 72 hours. AE (acoustic emission) sensors were attached to both ends, the specimens were subjected to a compressive load until fracture at a crosshead speed of 0.5 mm/min. The AE and failure loads were recorded and analyzed statistically. Results. The results showed that the failure strength of the ceromer/FRC inlay FPDs was affected by the total thickness of the connectors rather than the ceromer to FRC ratio or the depth of the pulpal wall. Fracture was initiated from the interface and propagated into the ceromer layer regardless of the change in the ceromer / FRC ratio. Conclusion. Within the limitations of this study, the failure loads showed significant differences only in the case of different connector thicknesses, and no significant differences were found between the same connector thickness groups. The application of AE analysis method in a fiber-reinforced inlay FPD can be used to evaluate the fracture behavior and to analyze the precise fracture point.
Keywords
Fiber-Reinforced Composite; Inlay FPD; Thickness; Fracture; AE;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Edelhoff D, Spiekermann H, Yildrim M. Metal-free inlay-retained fixed partial dentures. Quintessence Int 2001;32:269-281   PUBMED
2 Freilich MA, Karmarker AC, Burstone CJ, Goldberg AJ. Development and clinical applications of a light-polymerized fiber-reinforcement composite. J Prosthet Dent 1998;80:311-318   DOI   ScienceOn
3 Behr M, Rosentritt M, Leibrock A, Schneider Feyrer S, Handel G. In-vitro study of frcture strength and marginal adaptation of fibre-reinforced adhesive fixed partial inlay dentures. J Dent 1999;27:163-168   DOI   ScienceOn
4 Ellakwa AE, Shortall AC, Shehata MK, Marquis PM. The influence of fibre replacement and position on the efficiency of reinforcement of fibre reinforced composite bridge work. J Oral Rehabil 2001;28:785-791   DOI   ScienceOn
5 Bae JM, Kim KN, Hattori M, Hasegawa K, Yoshinari M, Kawada E, Oda Y. The flexural properties of fiber-reinforced composite with light-polymerized polymer matrix. Int J Prosthodont 2001;14:33-39   PUBMED
6 Kolbeck C, Rosentritt M, Behr M, Lang R, Handel G. In vitro study of fracture strength and marginal adaptation of polyethylene-fibre-reinforced-com- posite versus glass-fibre-reinforced-composite fixed partial denturesJ Oral Rehabil 2002;29;668-674
7 Capto AA, Li ZC, Zhao XY. Modulus of rupture of the Procera All-Ceramic system. J Esthet Dent 1996;8:120-126.   DOI
8 Kim KH, Kim YB, Okuno O. Microfracture mechanics of composite resins containing prepoly-merized particle fillers. Dent Mater J 2000;19:22-23   DOI   PUBMED   ScienceOn
9 Vallittu PK. Use of woven glass failures to reinforce a composite veneer. A fracture resistance and acoustic emission study. J Oral Rehabil 2002;29:423-429   DOI   ScienceOn
10 IPS Empress 2 Instruction / work manual. Ivoclar North America Inc, July 1999
11 Bartsch F. Fiber-reinforced inlay bridges: Guidelines for clinical and laboratory fabrication of Targis/Vectris metal-free inlay bridges. In: Quitessence of dental technology. Chicago; Quintessence;2000. p. 117-138
12 Craig RG, ed. Restorative dental materials. 6th ed. St. Louis;Mosby; 1980. p. 60-61
13 Iglesia-Puig MA, Arellano-Cabornero A. Inlay fixed partial denture as a conservative approach for restoring posterior missing teeth: a clinical report. J Prosthet Dent 2003;89:443-445   DOI   ScienceOn
14 Bonna AD, Anusavice KJ, DeHoff PH. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures. Dent Mater 2003;19:662-669   DOI   ScienceOn
15 Sorensen JA, Cruz M, Mito W, Raffeiner O, Meredith HR, Foser HP. A clinicalinvestigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic. Pract Periodont Aesthet Dent 1998;11:95-106
16 Behr M, Rosentritt M, Ledwinsky E, Handel G. Fracture resistance and marginal adaptation of conventionally cemented fiber-reinforcement com- posite three-unit FPDs. Int J Prosthodont 2002;15:467- 472   PUBMED
17 Krejci I, Boretti R, Giezendanner P, Lutz F.Adhesive crowns and fixed partial dentures fabricated of ceromer/FRC: clinical and laboratory procedures. Pract Periodont Aetsthet Dent 1998;10:487-498
18 Vallittu PK. The effect of glass fiber reinforce-ment on the fracture resistance of a provisional fixed partial denture. J Prosthet Dent 1998;79:125-130   DOI   ScienceOn
19 Monaco C, Ferrari M, Micel GP, Scotti R. Clinical evaluation of fiber-reinforced composite inlay FPDs. Int J Prosthodont 2003;16:319-325   PUBMED
20 Kim KH, Okuno O. Microfracture behavior of composite resins containing irregular-shaped fillers. J Oral Rehabil 2002;29:1153-1159   DOI   ScienceOn
21 Wakabayashi N, Anusavice KJ. Crack initiation modes in bilayered alumina/porcelain disks as a function of core /veneer thickness ratio and sup- porting substrate stiffriess.J Dent Res 2000;79:1398-1404   DOI   ScienceOn
22 ValIittu PK, Sevelius C. Resin-bonded, glass fiber-reinforced composite fixed partial dentures: a clinical study. J Prosthet Dent 2000;84:413-418   DOI   ScienceOn
23 Nohrstrom TJ, ValIittu PK, Yli-Urpo A. The effect of placement and quantity of glass fibers on the fracture resistance of interim fixed partial dentures. Int J Prosthodont 2000;13:72-78   PUBMED
24 Gohring TN, Peters OA, Lutz F. Marginal adaptation of inlay-retained adhesive fixed partial dentures after mechanical and thermal stress: an in vitro study. J Prosthet Dent 2001;86:81-92   DOI   ScienceOn
25 Moto W, Sorensen JA. Fabrication of fixed partial dentures with Empress 2. In: Quitessence of dental technology. Chicago;Quintessence; 1999. p.164-169
26 Rosentritt M, Behr M, Kolbeck C, Handel G. In vit- ro repair of three-unit fiber-reinforced composite FPDs. Int J Prosthodont 2001;14:344-349   PUBMED
27 Serdar CH, Ozturk B. Posterior bridges retained by resin-bonded cast metal inlay retainers: a report of 60 cases followed for 6 years. J Oral Rehabil 1997;24:697-704   DOI   ScienceOn
28 White SN, Caputo AA, Vidjak FMA, Seghi RR. Moduli of rupture of layered dental ceramics. Dent Mater 1994;10:52-58   DOI   ScienceOn
29 Magne P, Belser UC, krejci I.Stress distribution of inlay-anchored adhesive fixed partial dentures: a finite element analysis of the influence of restorative materials and abutment preparation design. J Prosthet Dent 2002;87:516-527   DOI   ScienceOn
30 Sorensen JA. The IPS Empress 2 system: defining the possibilities. In: Quitessence of dental technology. Chicago.Quintessence: 1999. p. 153-163
31 Loose M, Rosentritt M, Leibrook A, Behr M, Handel G. In vitro study of fracture strength and marginal adaptation of fibre-reinforced-composite versus all ceramic fixed partial dentures. Eur J Prosthodont Rest Dent 1998;6:55-62
32 Fradeani M, Barducci G. Lithium disilicate glass-ceramic restorations: indications and guidelines. In: Quitessence of dental technology. Chicago; Quintessence; 2000. p. 51-62
33 Gohring TN, Mormann WH, Lutz F. Clinical and scanning electron microscopic evaluation of fiber-reinforced inlay fixed partial dentures; preliminary results after one year. J Prosthet Dent 1999;82:662-668   DOI   ScienceOn
34 Behr M, Rosentritt M, Handel G. Fiber-reinforced composite crowns and FPDs: a clinical report. Int J Prosthodont 2003;16:239-243   PUBMED
35 Rosentritt M, Behr M, Handel G. Fixed partial dentures: all-ceramics, fibre-reinforced composites and experimental systems. J Oral Rehabil 2003;30:873-877   DOI   ScienceOn
36 Ellakwa AE, Shortall AC, Marquis PM. Influence of fibre position on the flexural properties and strain energy of a fibre-reinforced composite. J Oral Rehabil 2003;30:679-682   DOI   ScienceOn
37 Shannon A. Fiber-reinforced composite bridge: inlay-to-inlay technique. Dent Today 1997;Nov:48-53