Browse > Article
http://dx.doi.org/10.5392/JKCA.10.10.219

Effect of Surface Treatments of Titanium on Bond Strength and Interfacial Characterization in Titanium-Ceramic Prosthesis  

Chung, In-Sung (부산가톨릭대학교 보건과학대학 치기공학과)
Kim, Chi-Young (부산가톨릭대학교 보건과학대학 치기공학과)
Publication Information
The Journal of the Korea Contents Association / v.10, no.10, 2010 , pp. 219-225 More about this Journal
Abstract
The bonding strength between titanium and ceramic were analyzed according to the bonding agent and the coating methods of Au and TiN respectively. The bonding strength was measured through the 3 point bending test. Consequently, the bonding strength of the special bonding agent after the TiN coated (SPTB) group was $72.20({\pm}5.25)MPa$ which was the strongest one among groups. The bonding strength of the special bonding agent treated only (SPB) group was $67.66({\pm}12.10)MPa$, the special bonding agent after the Au coating SPGB group was $46.95({\pm}12.48)MPa$ and the SP group was $43.80({\pm}5.12)MPa$. Taking these results into account, the bonding strength of the SPB group shows the same as it of the SPTB group, however, it is stronger than SP group. And the TiN coated SPTB group shows the stronger bonding strength than the Au coated SPGB group.
Keywords
Titanium-Ceramic Prosthesis; Bond Strength; Interfacial Characterization;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 S. Atsu and S. Berksun, "Bond strength of three porcelains two forms of titanium using two firing atmospheres," J Prosthet Dent., Vol.84, pp.567-74, 2000.   DOI   ScienceOn
2 A. Sadeq, Z. Cai, R. D. Woody, and A. W. Miller, "Effects of interfacial variables on ceramic adherence to cast and machined commercially pure titanium," J Prosthet Dent., Vol.90, pp.10-17, 2003.   DOI   ScienceOn
3 I. Ozcan and H. Uysal, "Effect of silicon coating on bond strength of two different titanium ceramic to titanium," Dent Mater., Vol.21, pp.773-779, 2005.   DOI   ScienceOn
4 김지혜, 박상원, 방몽숙, 양홍서, 박하옥, 임현필, 오계정, 김현승, 이광민, 이경구, "타이타늄 표면 코팅처리에 따른 타이타늄도재관의 파절강도 비교", 대한치과보철학회지, 제45권, 제2호, pp.203-215, 2007.
5 정인성, 김치영, 최성민, "티타늄의 표면처리방법에 따른 도재와의 결합강도 및 세포독성에 관한 연구", 대한의생명과학회지, 제14권, 제2호, pp.105-113, 2008.
6 K. M. Lee, Z. Cai, J. A. Griggs, L. Guiatas, D. J. Lee, and T. Okabe, "SEM/EDS evaluation of porcelain adherence to gold-coated cast titanium," J Biomed Mater Res Part B, Appl Biomater 68B, pp.165-173, 2004.   DOI
7 Y. Oshida, L. Fung, and S. Isikbay, "Titanium-porcelain system Part II: Bond strength of fired porcelain on nitrided pure titanium," Biomed Mater Eng, Vol.7, pp.13-34, 1997.
8 김연미, 김현승, 이광민, 이도재, 오계정, 임현필, 서윤정, 박상원, "타이타늄 표면 코팅이 도재결합에 미치는 영향", 대한치과보철학회지, 제45권, 제5호, pp.601-610, 2007.
9 최택휴, 박상원, 방몽숙, 양홍서, 박하옥, 임현필, 오계정, 김현승, 이광민, 이경구, "타이타늄의 표면개질에 따른 도재결합특성", 대한치과보철학회지, 제45권, 제2호, pp.169-180, 2007.
10 M. Adachi, J. R. Mackert, E. E. Parry, and C. W. "Fairhurst, Oxide adherence and porcelain bonding to titanium and Ti-6Al-4V alloy," J Dent Res., Vol.69, pp.1230-1235, 1990.   DOI   ScienceOn
11 J. C. Wataha, "Biocompatibility of dental casting alloys ;a review," J Prosthet Dent., Vol.83, pp.224-34, 2000.
12 M. Kononen and J. Kivilahti, "Fusing of dental ceramics to titanium," J Dent Res., Vol.80, pp.848-54, 2001.   DOI   ScienceOn
13 I. A. Hussaini, and K. A. A. Wazzan, "Effect of surface treatment on bond strength of low-fusing porcelain to commercially pure titanium," J Prosthet Dent., Vol.94, pp.350-356, 2005.   DOI   ScienceOn
14 I. C. Pang, J. L. Gilbert, J. Chai, and E. P. Lautenschlager, "Bonding characteristics of low-fusing porcelain bonded to pure titanium and palladium-copper alloy," J. Prosthet Dent., Vol.73, pp.17-25, 1995.   DOI   ScienceOn
15 R. G. Craig, and J. M. Powers, Restorative dental materials, 11th ed., Mosby Inc. St. Louis, 2002.
16 M. J. Reyes, Y. Oshida, C. J. Andres, T. Barco, S. Hovijitra, and D. Brown, "Titanium-porcelain system PartIII; effects of surface modification on bond strengths," Biomed Mater. Eng., 2001. Vol.11, pp.117-136, 2001.
17 T. Derand, and H. Hero, "Bond strength of porcelain on cast vs. wrought titanium," Scand J Dent Res., Vol.100, pp.184-188, 1992.
18 M. Yan, C. T. Kao, J. S. Ye, T. H. Huang, and S. J. Ding, "Effect of preoxidation of titanium on the titanium-ceramic bonding," Surface & coatings technology, 2007 (in press).
19 S. W. Roh, M. S. Vang, H. S. Yang, S. W. Park, H. O. Park, and H. P. Lim, "Effect of surface modification on bond strength in titanium-porcelain system," J Kor Ac Prosth., Vol.5, pp.589-600, 2007.
20 H. Kimura, C. J. Horng, M. Okazaki, and J. Takahashi, "Oxidation effect on porcelain-titanium interface reactions and bond strength," Dent Mater., Vol.9, pp.91-99, 1990.   DOI   ScienceOn