Browse > Article
http://dx.doi.org/10.4334/JKCI.2012.24.4.415

Bond Strength of Near Surface-Mounted FRP Plate in RC Member  

Seo, Soo-Yeon (Dept. of Architectural Engineering, Korea National University of Transportation)
Publication Information
Journal of the Korea Concrete Institute / v.24, no.4, 2012 , pp. 415-422 More about this Journal
Abstract
This paper analyzed seventy eight previous test results to evaluate bond strength of Near Surface-Mounted (NSM) FRP and prediction formulas previously proposed by researchers. The results showed that the most reliable bond strength prediction was the one proposed by Seracino, who considered the shape coefficient (ratio of width-thickness) and stiffness of FRP. However, the equation tended to underestimate the bond strength, especially serious when FRP bond length was relatively short, because the equation did not consider the effect of bond length. Based on the analysis of previous test results, the relation between bond length and bond strength and the group effect due to close proximity of FRPs were determined. Based on the findings, the Seracino's formula was modified and it's applicability was evaluated. The result showed that the suggested formula can be used effectively to predict the bond strength of NSM FRP.
Keywords
near surface-mounted FRP; bond strength; shape coefficient (ratio of width-thickness); bond length; group effect;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Seracino, R., Jones, N. M., Ali, M. S. M., Page, M. W., and Oehlers, D. J., "Bond Strength of Near-Surface Mounted FRP Strip-to-Concrete Joints," Journal of Composites for Construction, ASCE, Vol. 11, No. 4, pp. 401-409.
2 Sena-Cruz, J. and Barros, J., "A Pullout Test for the Near Surface Mounted CFRP-Concrete Bond Characterization," Conference of Sociedade Portuguesa de Materials, 13, Porto, 2007.
3 ACI Committee 440, "Guide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI 440.1R-01)," American Concrete Institute, Famington Hills, Mich., 2001, 41 pp.
4 Fib TG9.3, "Externally Bonded FRP Reinforcement for RC Structures," Techinical Report on the Design and Use of Externally Bonded Frbre Reinforced Polymer Reinforcement (FRP EBR) for Reinforced Concrete Structures, International Federation for Structural Concrete, Lausanne, 2001.
5 Nami, A., "FRP Reinforcement for Bridge Structures," Proceedings, Structural Engineering Conference Beams, Journal of Composites for Construction, ASCE, Vol. 5, No. 1, 2000, pp. 12-17.
6 서수연, 오재길, 최기봉, "FRP 판을 이용한 콘크리트 보강에서 보강방법에 따른 부착성능," 대한건축학회 논문집, 27권, 8호, 2011, pp. 55-63.
7 서수연, 윤승조, 권영순, 최기봉, "표면매입 보강방법으로 콘크리트 내에 매입된 FRP 판과 콘크리트 사이의 부착거동," 콘크리트학회 논문집, 23권, 5호, 2011, pp. 675-682.
8 서수연, 최기봉, 권영순, "FRP 판으로 표면매입 보강된 철근콘크리트 보의 보강성능," 구조물진단학회지, 16권, 1호, 2012, pp. 18-26.
9 정우태, "CFRP로 표면매립 보강된 철근콘크리트 보의 등가 단면 모델을 고려한 휨거동 분석," 명지대학교 박사학위논문, 2009.
10 임동환, "표면매입 및 외부부착 탄소섬유판으로 보강된 RC보의 휨 거동에 관한 실험 연구," 콘크리트학회 논문집, 20권, 5호, 2008, pp. 601-609.   과학기술학회마을   DOI
11 EI-Hacha, R. and Rizkalla, S. H., "Near-Surface-Mounted Fiber-Reinforced Polymer Reinforcements for Flexural Strengthening of Concrete Structures," ACI Structural Journal, Vol. 101, No. 5, 2004, pp. 717-726.
12 Yost, J. R., Gross, S. P., Dinehart, D. W., and Mildenberg, J. J., "Flexural Behavior of Concrete Beams Strengthened with Near-Surface-Mounted CFRP Strips," ACI Structural Journal, Vol. 104, No. 4, 2007, pp. 430-437.
13 Seracino, R., Raizai Saifulnaz, M. R., and Oehlers, D. J., "Geneeric Debonding Resistance of EB and NSM Plate-to-Concrete Joints," Journal of Composites for Construction, ASCE, Vol. 11, No. 1, pp. 401-409.
14 Ali, M. S. M., Oehlers, D. J., Friffith, M. C., and Seracino, R., "Interfacial Stress Transfer of Near Surface-Mounted FRP-to-Concrete Joints," Engineering Structures, Vol. 30, 2008, pp. 1861-1868.   DOI   ScienceOn