Browse > Article
http://dx.doi.org/10.4334/JKCI.2012.24.1.087

Influence of Blast Furnace Slag and Anhydrite on Strength of Shotcrete  

Ryu, Sung-Hee (R&D Department, Union Corporation)
Shin, Kyung-Joon (Dept. of Civil Engineering, Chungnam National University)
Kim, Yun-Yong (Dept. of Civil Engineering, Chungnam National University)
Publication Information
Journal of the Korea Concrete Institute / v.24, no.1, 2012 , pp. 87-95 More about this Journal
Abstract
This study investigated the compressive strength, flexural strength, setting time, and rebound when blast furnace slag and anhydrite, which are widely used mineral admixtures for concrete, are applied to shotcrete. When Ordinary Portland Cement (OPC) was replaced at a rate of 10% with blast furnace slag and anhydrite, the initial and final setting time requirements were all satisfied. However, when OPC was replaced at a rate of 20%, final setting was delayed, revealing that this mixture was not suitable for shotcrete. Compressive strength test results showed that the mixture with 10% OPC replacement rate met the target strength at 1 day and 28 days for permanent tunnel support usage. Particularly, the mixture designed with OPC replacement by blast furnace slag and anhydrite at rates of 5% showed the highest compressive strength. Rebound measurements revealed that this mixture exhibited excellent performance with 23% reduction in the rebound compared to the shotcrete that was produced with only OPC binder.
Keywords
blast furnace slag; anhydrite; strength; setting time; rebound;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 원종필, 성상경, 박해균, 이명섭, "$C_{12}A_{7}$ 계 광물계 급결제를 사용한 숏크리트의 내구특성," 대한토목학회논문집, 25권, 3C, 2005, pp. 235-240.   과학기술학회마을
2 Kim, Y. Y., Kong, H. J., and Li, V. C., "Design of Engineered Cementitious Composite Suitable for Wet-Mixture Shotcreting," ACI Materials Journal, Vol. 100, No. 6, 2003, pp. 511-518.
3 Melbye, T. A. and Dimmock, R. H., "Modern Advances and Applications of Sprayed Concrete," Proc, of the Int. Conf. on Engineering Developments in Shotcrete, Tasmania Australia, Keynote Paper, 2001, pp. 7-13.
4 EFNARC, European Specification for Sprayed Concrete, Published by EFNARC, 1996, pp. 5-8.
5 원종필, 김황희, 박경훈, 이시원, "급결제 종류 및 실리 카퓸 치환율에 따른 영구지보재로서 숏크리트의 배합설계 및 성능 평가," 대한토목학회논문집, 27권, 2C호, 2007, pp. 157-162.   과학기술학회마을
6 Lee, S. P., Kim, D. H., Ryu, J. H., Yu, J. Y., Lee, S. D., Han, S. H., Choi, M. S., and Park, C., "An Experimental Study on the Development of High Performance Shotcrete for Permanent Tunnel Support," Proceeding of the 31st ITA-AITES World Tunnel Congress, Vol. 1, 2005, pp. 455-461.
7 장수호, 배규진, 원종필, 최명식, "국산 메타카올린에의한 습식 숏크리트의 조기 및 장기강도 향상에 관한 연구," 대한토목학회 정기학술대회, 2007, pp. 3003-3006.
8 장수호, 배규진, 최순욱, 박민환, 차철용, 최명식, 김준우, 장준희, 이홍규, 숏크리트의 성능향상을 위한 고성능 혼화재 조성물 및 이를 포함하는 숏크리트, 출원번호 2009-0056579, 2009.
9 최희섭, 김동민, 장필성, 서신석, "고로슬래그 미분말을 혼입한 레디믹스트 숏크리트의 현장적용성에 관한 실험적 연구," 한국지반공학회논문집, 25권, 6호, 2009, pp. 31-45.   과학기술학회마을
10 일본터널기술협회, 현장기술자를 위한 숏크리트, 록볼트, 2005, pp. 2-60, 2-113-2-114.
11 Manjit Singh and Mridul Garg, "Activation of Gypsum Anhydrite-Slag Mixtures," Cement and Concrete Research, Vol. 25, No. 2, 1995, pp. 332-338.   DOI   ScienceOn
12 국토해양부, 콘크리트표준시방서, 한국콘크리트학회, 2009, pp. 220-221.
13 Neto, A. A. M., Cincotto, M. A., and Repette, W., "Mechanical Properties, Drying and Autogenous Shringkage of Blast Furnace Slag Activated with Hydrated Lime and Gypsum.," Cement and Concrete Composites, Vol. 32, Issue 4, 2010, pp. 312-318.   DOI   ScienceOn
14 노재성, 김도수, 임채영, "시멘트 모르타르의 압축강도 개선을 위한 고강도 혼화재의 제조 및 적용특성," 한국 콘크리트학회 봄 학술대회 논문집, 1998, pp. 83-88.
15 조민형, 남재현, "II형 무수석고를 이용한 고강도콘크리트용 혼화재개발에 관한 연구," 대한건축학회논문집, 15권, 3호, 1999, pp. 71-80.
16 한국도로공사, 고속도로공사 전문시방서, 2009, pp. 7-17-7-31.
17 한국콘크리트학회, 숏크리트용 급결제 품질규격, KCI SC 102, pp. 483-487.
18 와따나베 요시하루, 마쓰나가 요시히사, 미노루, 시멘트 혼화재 및 이를 함유하는 시멘트 조성물, 출원번호 특 1992-0006891, 1992, pp. 7-1-7-7.
19 박종탁, 오홍섭, "인산부산석고의 각 형태조건에 따른 슬래그 시멘트의 품질특성에 관한 실험적 연구," 콘크리트학회 논문집, 21권, 6호, 2009, pp. 729-735.   과학기술학회마을   DOI   ScienceOn
20 이민웅, "무수석고를 혼입한 모르타르의 내구특성 분석에 관한 실험적 연구," 건국대 석사학위논문, 2011, pp. 29-30.