Browse > Article
http://dx.doi.org/10.4334/JKCI.2010.22.6.833

Evaluation of Steel Pull-Out of Reinforced Concrete Beam-Column Joints  

Woo, Jae-Hyun (Dept. of Architectural Engineering, Sungkyunkwan University)
Park, Jong-Wook (Dept. of Architectural Engineering, Sungkyunkwan University)
Kim, Byoung-Il (Dept. of Architectural Engineering, Sungkyunkwan University)
Lee, Jung-Yoon (Dept. of Architectural Engineering, Sungkyunkwan University)
Publication Information
Journal of the Korea Concrete Institute / v.22, no.6, 2010 , pp. 833-841 More about this Journal
Abstract
In this report, the test results of five reinforced concrete beam-column joint subjected to cyclic load are presented. The main purpose of the research is to investigate the influence of the steel pull-out of the beam-column joints to the shear and ductile capacity of the RC beam-column assembles. In addition, the influence of the amount of beam reinforcement to the joint shear and ductile capacity is evaluated. Test results indicate that the yield penetration of steel bar increases as the joint shear strength ratio, $V_{j1}/V_{jby}$ decreases. And the slippage of the steel bars are varied according to the region of the beam-column joints. The pull-out of the steel bars of five specimens was almost the same regardless of the joint shear strength ratio, $V_{j1}/V_{jby}$. Because it was affected by not only the yield penetration of steel bar but also the axial elongation in the plastic hinge.
Keywords
beam-column jont; pull-out; beam reinforcement slip; ductile capacity; shear strength;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Kim, J. H. and Lafave, J. M., “Key Influence Parameters for the Joint Shear Behaviour of Reinforced Concrete RC Beam-Column Connections,” Engineering Structures, Vol. 29, Issue 10, 2007, pp. 2523-2539.   DOI   ScienceOn
2 Lee, J. Y., Kim, J. Y., and Oh, K. J., Strength Deterioration of Reinforced Concrete Beam-Column Joints Subjected to Cyclic Loading, Engineering Structure, Vol. 31, Issue 9, 2009, pp. 2070-2085.   DOI   ScienceOn
3 Teraoka, M., Kanoh, Y., Sasaki, S., and Hayashi, K., “An Estimation of Ductility in Interior Beam-Column Sub-Assemblages of Reinforced Concree Frames,” Journal of the Society of Materials Science, 1996, Vol. 45, No. 9, pp. 1033-1041.   DOI   ScienceOn
4 Paulay, T., Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, Jogn Wiley and Sons, New York, 1992, pp. 136-142.
5 Joint ACI-ASCE Committee 352, Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures, American Concrete Institute, Farmington Hills, Michigan, 2003.
6 Fujii, S. and Morita, S., Comparison between Interior and Exterior RC Beam-Column Joint Behavior, ACI SP-123, 1991, pp. 145-166.
7 Ehasani, M. R., Moussa, A. E., and Valenilla, C. R., Comparison of Inelastic Behavior of Reinforced Ordinary and High Strength Concrete Frames, ACI Structural Journal, Vol. 84, No. 2, 1987, pp. 161-169.
8 Durrani, A. J. and Wight, J. K., “Behavior of Interior Beam to Column Connections under Earthquake Type Loading,” ACI Journal Proceeding, Vol. 82, No. 3, 1985, pp. 343-349.   DOI
9 Attaalla, S. A., “General Analytical Model for Nominal Shear Stress of Type 2 Normal-and Hgh-Strength Concrete Beam-Column Joints,” ACI Structural Journal, Vol. 101, No. 1, pp. 65-75.
10 Hakuto, S., Park, R., and Tanaka, H., “Effect of Deterioration of Bond of Beam Bars Passing through Interior Beam-Column Joints on Flexural Strength and Ductility,” ACI Structural Journal, Vol. 96, No. 5, pp. 858-864.
11 Leon, R. T., “Shear Strength and Hysteretic Behavior of Interior Beam-Column Joints,” ACI Structural Journal, Vol. 87, No. 1, 1990, pp. 3-11.
12 Kazuhiro, K., Shunsuke, O., and Hiroyuki, A., Development of Design Criteria for RC Interior Beam-Column Joints, ACI SP-123, 1991, pp. 97-124.
13 Brooke, N. J., Megget, L. M., and Ingham, J. M., “Bond Performance of Interior Beam-Column Joints with High-Strength Reinforcement,” ACI Structural Journal, Vol. 103, No. 4, 2006, pp. 596-603.