Browse > Article
http://dx.doi.org/10.4334/JKCI.2010.22.5.711

Evaluation of the Maximum Yield Strength of Steel Stirrups and Shear Behavior of RC Beams  

Lee, Jung-Yoon (Dept. of Civil, Architectural, and Environmental System Engineering, Sungkyunkwan University)
Choi, Im-Jun (Doosan Heavy Industries & Construction)
Kang, Ji-Eun (Dept. of Civil, Architectural, and Environmental System Engineering, Sungkyunkwan University)
Publication Information
Journal of the Korea Concrete Institute / v.22, no.5, 2010 , pp. 711-718 More about this Journal
Abstract
The requirement of the maximum yield strength of shear reinforcement in the KCI-07 code is quite different to those in the ACI-08 code, EC2-02, CSA-04, and JSCE-04 codes. Eighteen RC beams having high strength shear reinforcement were tested. Test results indicated that even if the yield strength of shear reinforcement in beams was much greater than the maximum yield strength required by the KCI-07 design code, the shear reinforcement of these beams reached their yield strains. Furthermore, the shear strengths of tested beams increased almost linearly with the increase of the amount of shear reinforcement. In addition, larger numbers of diagonal cracks developed in the web of the beam having greater yield strength than the beams having lower yield strength of shear reinforcement. The maximum crack width of the beam having high strength shear reinforcement was approximately the same to the crack with of the beam having normal strength shear reinforcement.
Keywords
maximum yield strength of shear reinforcement; shear strength; reinforced concrete beams; shear failure modes; diagonal cracks;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Johnson, M. K. and Ramirez, J. A., “Minimum Shear Reinforcement in Beams with High Strength Concrete,” ACI Structural Journal, Vol. 86, No. 4, 1989, pp. 376-382.
2 Roller, J. J. and Russell, H. G., “Shear Strength of High-Strength Concrete Beams with Web Reinforcement,” ACI Structural Journal, Vol. 87, No. 2, 1990, pp. 191-198.
3 Lee, J. Y. and Kim, U. Y., “Effect of Longitudinal Tensile Reinforcement Ratio and Shear Span-to-Depth Ratio on Minimum Shear Reinforcement in Beams,” ACI Structural Journal, Vol. 105, No. 2, 2008, pp. 134-144.
4 Lee, J. Y. and Hwang, H. B., “Maximum Shear Reinforcement of Reinforced Concrete Beams,” ACI Structural Journal, Vol. 107, No. 5, 2010, pp. 580-588.
5 한국콘크리트학회, 콘크리트 구조물에 대한 고장력 철근의 적용성 연구, KCI-R-10-001, 2010, 390 pp.
6 한국콘크리트학회, 대한주택공사, 고강도 철근 설계.시공 지침, 2009, 268 pp.
7 국토해양부, 콘크리트구조설계기준, 한국콘크리트학회, 2007, 327 pp.
8 ACI Committee 318-08, Building Code Requirements for Reinforced Concrete and Commentary (ACT 318-08/ACI 318R-08 ), American Concrete Institute, Detroit, 2008, 465 pp.
9 Comete European de Normalisation(CEN), Eurocode 2: Design of Concrete Structures. Part 1-General Rules and Rules for Buildings, prEN 1992-1, 2002, 211 pp.
10 CSA Committee A23.3-04, Design of Concrete Structures for Buildings CAV3-A23.3-04, Canadian Standards Association, Canada, 2004, 232 pp.
11 Japan Society of Civil Engineering, Standard Specifications for Concrete Structures, Japan Society of Civil Engineering, Japan, 2002, 257 pp.
12 Yoon, Y. S., Cook, W. D., and Mitchell, D., “Minimum Shear Reinforcement in Nominal, Medium, and High-Strength Concrete Beams,” ACI Structural Journal, Vol. 93, No. 5, 1996, pp. 576-584.