Browse > Article
http://dx.doi.org/10.4334/JKCI.2010.22.1.123

Effect of Recycled Coarse Aggregate (RCA) Replacement Level on the Bond Behaviour between RCA Concrete and Deformed Rebars  

Jang, Yong-Heon (Dept. of Architectural Engineering, Chungnam National University)
Choi, Ki-Sun (Building Structure & Resources Research Division, Korea Institute of Construction Technology)
You, Young-Chan (Building Structure & Resources Research Division, Korea Institute of Construction Technology)
Kim, Keung-Hwan (Building Structure & Resources Research Division, Korea Institute of Construction Technology)
Yun, Hyun-Do (Dept. of Architectural Engineering, Chungnam National University)
Publication Information
Journal of the Korea Concrete Institute / v.22, no.1, 2010 , pp. 123-130 More about this Journal
Abstract
In this study, mixed recycled coarse aggregate (RCA) was produced by mixing RCA from waste concrete in order to evaluate a new method of RCA production. Bond strength between reinforcing bars and RCA concrete was qualitatively evaluated as a part of continuous studies to establish design code of reinforced concrete structural members using recycled aggregate. For practical application, specimens were manufactured with the ready mix RCA concrete. Parameters investigated include: concrete compressive strength (i.e 21, 27 and 40 MPa), replacement levels (i.e 0, 30, 60 and 100%), bar position (i.e vertical and horizontal) and bar location (75 and 225 mm). For the pull-out test, each specimen was in the form of a cube, with each side of 150 mm in length and a deformed bar, 16 mm in diameter, was embedded in the center of each specimen. From the test results, the most of HT type specimen with compressive strength of 21 and 27 MPa showed lower bond strength than the ones provided in CEB-FIP and considered in reinforcement location factor ($\alpha\;=\;1.3$). It was reasoned that bonded area of top bar specimen was reduced at the soffit of reinforcement because of bleed water of fresh concrete. Therefore the reinforcement location factor in current KCI design code should be reviewed and modified.
Keywords
recycled coarse aggregate (RCA); replacement level; bond strength; pull-out;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 ASTM C234, "Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel," American Society for Testing and Material.
2 Xiao, J. and Falkner, H., "Bond Behavior between Recycled Aggregate Concrete and Steel Rebars," Construction and Building Materials, Vol. 21, Issue 2, 2007, pp. 395-401.   DOI   ScienceOn
3 건설폐기물의 재활용 촉진에 관한 법률, 2003.
4 국토해양부, "순환골재 품질기준," 국토해양부, 2005.
5 전수만, 윤현도, 최기선, 유영찬, 김긍환, "순환골재 콘크리트와 이형철근의 부착특성," 콘크리트학회 논문집, 20권, 2호, 2008, pp. 165-173.   과학기술학회마을   DOI
6 CSA S806-2, "Design and Construction of Building Components with Fiber-Reinforced," Canadian Standards Association.
7 Tassios, T. P., "Properties of Bond between Concrete and Steel under Load Cycles Idealizing Seismic Actions," Proc. AICAP-CEB Symposium, Rome, CEB Bulletin No. 131, 1979, pp. 67-122.
8 한국콘크리트학회, 콘크리트구조설계기준, 한국콘크리트학회, 2007, 523 pp.
9 최희복, 강경인, "순환골재콘크리트와 이형철근 사이의 부착성능," 대한건축학회 논문집(구조계), 24권, 3호, 2008, pp. 95-102.
10 윤승조, 서수연, 이우진, 강성덕, 윤두희, 김태호, 민석환, "순환 굵은골재 치환율에 따른 콘크리트의 부착성능 평가에 관한 실험 연구," 대한건축학회 학술발표대회논문집, 26권, 1호, 2008, pp. 529-532.
11 Ajdukiewicz, A. and Kliszczewicz, A., "Influence of Recycled Aggregate on Mechanical Properties of HS/HPC," Cement and Concrete Composites, Vol. 24, Issue 2, 2002, pp. 269-279.   DOI   ScienceOn
12 KS F 2441, "철근의 부착에 의한 콘크리트 비교 시험 방법," 지식경제부 기술표준원, 2005.
13 이민정, 윤현도, 김선우, 최기선, 유영찬, 김긍환, "철근의 위치에 따른 이형철근과 순환굵은골재 콘크리트의 부착성능," 대한건축학회 논문집(구조계), 24권, 8호, 2008, pp. 29-39.
14 Esfahani, M. R., Lachemi, M., and Kianoush, M. R., "Topbar Effect of Steel Bars in Self-consolidating Concrete (SCC)," Cement and Concrete Composites, Vol. 30, Issue 2, 2008, pp. 52-60.   DOI   ScienceOn