Browse > Article
http://dx.doi.org/10.4334/JKCI.2007.19.3.301

Lattice Shear Reinforcement for Slab-Column Connection Subjected to Unbalanced Moment  

Park, Hong-Gun (Dept. of Architecture, Seoul National University)
Kim, You-Ni (Dept. of Architecture, Seoul National University)
Song, Jin-Kyu (Dept. of Architecture, Chonnam National University)
Kim, Sun-Kyu (MIDAS Information Technology Co., Ltd.)
Lee, Chul-Woo (POSCO Engineering & Construction Co., Ltd.)
Publication Information
Journal of the Korea Concrete Institute / v.19, no.3, 2007 , pp. 301-312 More about this Journal
Abstract
A slab-column connection is susceptible to brittle punching shear failure, which may result in the necessity of shear reinforcement. In the present study, to investigate the earthquake resistance of newly developed lattice shear reinforcement, experimental study was performed for interior slab-column connections subjected to cyclic loading. For comparison, specimens with existing shear reinforcement method such as stud rail, shear band and stirrup were also tested. The test result showed that the structural capacity of the lattice shear reinforcement was superior to those of the existing methods and was greater than the code-specified strength. On the other hand, the existing methods did not significantly improve the shear strength of the specimens. The shear strengths of the existing methods were much less than the code-specified shear strength.
Keywords
slab-column connection; lateral load; lattice; shear reinforcement; ductility;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 S. Unnikrishna Pillai, Wayn Kirk, and Leonard Scavuzzo,'Shear Reinforcement at Siab-Colunm Connections in a Reinforced Concrete Flat Plate', ACI Structural Journal, Vol.79, No.1, 1982, pp.36-42
2 Carl Erik Broms, 'Elimination of Flat Plate Punching Failure Mode', ACI Structural Journal, Vol.79, No.4, 2000, pp.94-101
3 Tetsuya Yamada, Antonio Nanni, and Katsushiko Endo, 'Punching Shear Resistance of Flat Slabs: Influence of Reinforcement Type and Ratio', ACI Structural Journal, Vol.89, No.4, 1992, pp.555-564
4 H. Park and K. Choi, 'Improved Strength Model for Interior Flat Plate-Column Connections Subject to Unbalanced Moment', Journal of Structural Engineering, ASCE, Vol.132, No.5, 2006, pp.694-704   DOI   ScienceOn
5 안경수, 래티스 철근을 이용한 무량판-기둥 접합부의 전 단보강, 석사학위논문, 서울대학교, 2004, pp.2-3, 60
6 ACI-ASCE Committee Report, 'Recommendations forDesign of Slab-Column Connections in Monolithic Reinforced Concrete Structures', ACI Structural Journal, Nov. Dec., 1988, pp.675-69
7 A. J. Durrani, Y. Du, and Y.H. Luo, 'SeismicResistance of Nonductil Slab-Column Connections in Existing Flat-Slab Building', ACI Structural Journal, Vol.92, No.4, 1995, pp.479-487
8 Moehle, J. P., 'Strength of Slab-Column Edge Connections', ACI Structural Journal, Vol.85, No.1, 1988, pp.89-98
9 Moehle, J. P., Kreger, M. E., and Leon, R, 'Background to Recommendations for Design of Reinforced Concrete SlabColumn Connections', ACI Structural Journal, Vol.85, No.6, 1988, pp.636-644
10 Rosenblueth, E. andMeli,R., 'The 1985 Earthquake: Causes and Effects in Mexico City', Concrete International, Vol.8, No.5, 1986, pp.23-34
11 한국콘크리트학회, '콘크리트구조설계기준', 한국콘크리트학회, 2003, pp.452-455
12 ACI Committee 318, Building Code Requirements for Structural Concrete(ACI 318-05) and Commentary(ACI 318R-05), American Concrete Institute, USA, 2004, pp.156- 160
13 Shafiqul Islam and Robert Park, 'Test on Slab-Column Connections with Shear and Unbalanced Flexure', Journal of Structural Engineering, ASCE, Vol.102, No.3, 1976, pp.549-568
14 Ian N. Robertson, Tadashi Kawai, James Lee, and Brian Enomoto, 'Cyclic Testing of Slab-Column Connections with Shear Reinforcement', ACI Structural Journal, Vol.99, No.5, 2002, pp.605-613
15 Amin Ghali and Neil Hammill, 'Effectiveness of Shear Reinforcement in Slabs', Concrete International, 1992, January, pp.60-65
16 John D.Mortin and Amin Ghali, 'Connection of Flat Plates to Edge Column', ACI Structural Journal, Vol.88, No.2, 1991, pp.191-198
17 E.F.EI-Salakawy, M.A.Polak, and M.H.Soliman, 'Slab-Column Edge Connections Subjected to High Moments', Canadian Journal for Civil Engineering, Vol.25, 1998, pp.526-538   DOI
18 Sami Megally and Amin Ghali, 'Seismic Behavior of Edge Column-Slab Connectiions with Stud Shear Reinforcement', ACI Structural Journal, Vol.97, No.1, 2000, pp.53-59
19 Adel A. Elgabry and Amin Ghali, 'Tests on Concrete SlabColumn Connections with Stud-Shear Reinforcement Subjected to Shear-Moment Transfer', ACI Structural Journal, Vol.84, No.5, 1987, pp.433-442
20 Fee Kiong Lim and B. Vijaya Rangan, 'Studies on Concrete Slabs with Stud Shear Reinforcement in Voconity of Edge and Comer Colunms', ACI Structural Journal, Vol.92, No.5, 1995, pp.515-525
21 Neil Hammill and Amin Ghali, 'Punching Shear Resistance of Comer Slab-Colunm Connections', ACI Structural Journal, Vol.91, No.6, 1994, pp.697-707
22 K. Pilakoutas and X. Li, 'Alternative Shear Reinforcement for Reinforced Concrete Flat Slabs', Journal of Structural Engineering, Vol.129, No.9, 2003, pp.1164-1172   DOI   ScienceOn
23 박홍근, 안경수, '래티스 철근을 이용한 무량판-기둥 접 합부의 전단보강', 콘크리트학회 논문집, 17권, 2호, 2005, pp.191-200
24 ACI-ASCE Committee 421, 'Shear Reinforcement for Slabs(ACI 421.IR-99)', ACI, pp.10-11
25 박홍근, 최경규, '불균둥 휩모멘트를 받는 플랫 플레이 트-기퉁 접합부의 강도산정모텔', 콘크리트학회 논문집, 14권, 6호, 2002, pp.961-979