Browse > Article
http://dx.doi.org/10.4334/JKCI.2006.18.2.161

Experimental Study on Hysteretic Behavior of 100 MPa Ultra High-Strength Concrete Tied Columns  

Kim, Jong-Keun (Dept. of Architectural Engineering, Hanyang University)
Shin, Sung-Woo (Dept. of Architectural Engineering, Hanyang University)
Publication Information
Journal of the Korea Concrete Institute / v.18, no.2, 2006 , pp. 161-168 More about this Journal
Abstract
An experimental investigation was conducted to examine the hysteretic behaviors of ultra-high strength concrete tied columns. The purpose of this study is to investigate the safety of ultra-high strength concrete columns with 100 MPa compressive strength for the requirement of ACI provisions. Eight 1/3 scaled columns were fabricated to simulate an 1/2 story of actual structural members with the cross section $300{\times}300mm$ and the aspect ratio 4. The main variables are axial load ratio, configurations and volumetric ratios of transverse reinforcement. The results show that the deformability of columns are affected by the configurations and volumetric ratios of transverse reinforcement. Especially, it has been found that the behavior of columns are affected by axial load ratio rather than the amounts and the configurations of transverse reinforcement. Consequently, to secure the ductile behavior of 100 MPa ultra-high strength concrete columns, ACI provisions for the requirement of transverse steel may considered axial load level and the details of transverse reinforcement.
Keywords
ultra-high strength concrete tied column; tie configuration; transverse reinforcement; axial load ratio;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Shamin A. Sheikh and Shafits. S. Khouy, 'A Perform-ance-Based Approach for the Design of Confining Steel in Tied Columns', ACI Structural Journal, Jul.-Aug., 1997, pp.421-431
2 신성우, 이광수, 안종문, 한범석, '축력과 반복횡력을 받는 고강도 RIC 기둥의 거동', 대한건축학회논문집, 15권, 2호, 1999. 2, pp.47-54
3 Salim Razvi and Murat Saatcioglu, 'Confinement Model for High-Strength Concrete', Journal of Structural Engineering, ASCE, Vol.125, No.3, March, 1999, pp. 281-289   DOI   ScienceOn
4 ACI, Building Code Requirements for Reinforced Concrete(ACI 318-05), ACI Committee 318, American Concrete Institute, 2005