Browse > Article

Injection Characteristics with Valve Geometries for a Diesel Engine  

김성윤 (한국해양대학교 대학원 기계공학과)
오승우 (한국해양대학교 대학원 기계공학과)
박권하 (한국해양대학교 기계정보공학부)
Publication Information
Journal of Advanced Marine Engineering and Technology / v.27, no.6, 2003 , pp. 745-752 More about this Journal
Abstract
Injection technology is one of the important technologies in a diesel engine. Many studies have done on the injection system. In this study, the fuel chamber geometry, the orifice ratio and the needle lift of the injection valve of a diesel engine for generating electricity are varied and tested. The injection pressure, duration and spray shapes are produced with pressure transducer, needle lift sensor and highspeed camera. The result shows that the nozzle hole size has influence on the rail pressure and injection duration sensuously.
Keywords
Injection characteristics; Fuel chamber geometry; Needle lift; Diesel engine;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Influence of Gas-Injector Geometry on Atomization Performance of Aerated-liquid Nozzles /
[ Wang,X.F.;Chin,J.S.;Lefebvre,A.H. ] / International Journal of Turbo and Jet Engine
2 On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design an Operating Conditions /
[ Reitz,R.D.;Bracco,F.B. ] / SAE paper 790494
3 Atomization Mechanism of Fuel Injection /
[ Huh,K.Y.;Gosman,A.D. ] / ILASS America 91
4 Analysis of the Flow in the Nozzle of a Vertical Multi-Hole Diesel Engine Injector /
[ Arcoumanis,C.;Gavaises,M.;Nouri,J.M.;Wahab,E.;Horrocks,R. ] / SAE paper 980811
5 Fuel Droplet Size Distribution in Diesel Combustion Chamber /
[ Hiroyasu,H.;Kadota,T. ] / SAE paper 740715
6 The Mechanism of the Atomization of Liquid /
[ Castleman Jr.;R. A. ] / J. Research Nat.Bur.Standards   DOI
7 Mixing, Transport and Combustion in Sprays /
[ Faeth,G.M. ] / Prog. Energy Comb. Sci.   DOI   ScienceOn
8 Characteristics of a Transient Diesel Fuel Spary /
[ Koo,J.Y. ] / Ph. D. Thesis,Department of Mechanical Engineering
9 핀틀형 노즐의 팁형상에 따른 분사특성 및 글로우 플러그 충돌효과에 관한 연구 /
[ 조래희 ] / 부산대학교 석사학위논문
10 연료노즐 내부유동 현상의 수치해석 /
[ 구자예;박장혁;오두석;정홍철 ] / 대한기계학회논문집(B)   과학기술학회마을
11 충돌판에 의한 분무의 공간분포에 관한 실험적 연구 /
[ 차건종;김덕줄 ] / 대한기계학회논문집   과학기술학회마을
12 노즐분공내 유체충돌이 있는 디젤노즐의 유동 및 분무특성 연구 /
[ 하성업;김흥열;류구영;구자예 ] / 대한기계학회논문집 (B)   과학기술학회마을
13 Disintegrating Progress of a Liquid Jet and Internal Flow in a Nozzle /
[ Shimizu,M.;Arai,M.;Hiroyasu,H. ] / JSME   DOI
14 Mechanism of Disintegration of Liquid Jets /
[ Schweitzer,P.H. ] / J. Applied Physics   DOI
15 두개의 와류분무노즐에서 분사되는 이중분무의 특성에 관한 연구 /
[ 김인구 ] / 한국과학기술원 박사학위논문
16 Mechanism of Air-Assisted Liquid Atomization /
[ Liu,A.B.;Reitz,R.D. ] / ILASS America 92
17 Atomizing Round Jets /
[ Wu,K.J. ] / Ph.D.Thesis,Department of Mechanical and Aerospace Engineering