Browse > Article
http://dx.doi.org/10.4150/KPMI.2018.25.4.302

The Effects of Si or Sn on the Sintered Properties of Fe-(Mo,Mn)-P Lean alloy  

Jung, Woo-Young (School of Nano and Advanced Materials Science & Engineering, Gyeongsang National University)
Ok, Jin-Uk (School of Nano and Advanced Materials Science & Engineering, Gyeongsang National University)
Park, Dong-Kyu (LINC, Gyeongsang National University)
Ahn, In-Shup (School of Nano and Advanced Materials Science & Engineering, Gyeongsang National University)
Publication Information
Journal of Powder Materials / v.25, no.4, 2018 , pp. 302-308 More about this Journal
Abstract
A lean alloy is defined as a low alloy steel that minimizes the content of the alloying elements, while maintaining the characteristics of the sintered alloy. The purpose of this study is to determine the change in microstructure and mechanical properties due to the addition of silicon or tin in Fe-Mo-P, Fe-Mn-P, and Fe-Mo-Mn-P alloys. Silicon- or tin-added F-Mo-P, Fe-Mn-P, and Fe-Mo-Mn-P master alloys were compacted at 700 MPa and subsequently sintered under a $H_2-N_2$ atmosphere at $1120^{\circ}C$. The sintered density of three alloy systems decreases under the same compacting pressure due to dimensional expansion with increasing Si content. As the diffusion rate in the Fe-P-Mo system is higher than that in the Fe-P-Mn system, the decrease in the sintered density is the largest in the Fe-P-Mn system. The sintered density of Sn added alloys does not change with the increasing Sn content due to the effect of non-dimensional changes. However, the effect of Si addition on the transverse rupture strengthening enhancement is stronger than that of Sn addition in these lean alloys.
Keywords
Lean alloy; Green density; Sintered density; Transverse rupture strength; Microstructure;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 R. Oro, M. Campos, JM. Torralba and C. Capdevila: Powder Metall., 55 (2012) 294.   DOI
2 G. Schlieper and F. Thummler: Powder Metallurgy International, 172 (1979) 174.
3 F. Castro, M. Sarasola, S. Sainz and T. Gomez-Acebo: Progress in Powder Metallurgy, 534 (2007) 705.
4 P. Beiss: Advances in Powder Metallurgy & Particulate Material, 1 (2006) 14.
5 V. Vassileva, D. Krecar, C. Tomastik, Ch. Gierl-Mayer, H. Hutter and H. Danninger: Powder Metall., 15 (2015) 37.
6 C. Schade, T. Murphy, A. Lawley and R. Doherty: Powder Metall., 49 (2013) 15.
7 Jens Rassmus, Anna Larsson and Heike Grosser: PIM International, 5 (2011) 84.
8 W. Y. Jung, J. U. Ok, D. K. Park and I. S. Ahn: J. Korean Powder Metall. Inst., 24 (2017) 400.   DOI
9 B. Lindsley, R. Lawcock, A. Lawley and P. J. McGeehan: Advances in Powder Metallurgy & Particulate Materials., 7 (2008) 17.
10 W. Y. Jung, D. K. Park, B. H. Ko, J. W. Park and I. S. Ahn: J. Korean Powder Metall. Inst., 23 (2016) 397.   DOI
11 F. Castro, S. Sainz, B. Lindsley and W. B. James: Powder Metall., 29 (2007) 304.
12 C. Schade, T. Murphy, A. Lawley and R. Doherty: International Journal of Powder Metallurgy, 48 (2012) 6.
13 T. Kono: Journal of the Japan Society of Powder and Powder Metallurgy, 25 (1978) 13.   DOI