Browse > Article
http://dx.doi.org/10.4150/KPMI.2004.11.5.383

A Study on Abnormal Expansion of Fe-Cu Sintered Alloy  

Song Young-Jun (Dept. of Materials and Metallurgical Engineering, Samcheok National University)
Kim Youn-Che (Dept. of Materials and Metallurgical Engineering, Samcheok National University)
Publication Information
Journal of Powder Materials / v.11, no.5, 2004 , pp. 383-390 More about this Journal
Abstract
In order to investigate behavior of abnormal expansion of the iron-copper compacts, we compared the dilatometric curves of the compacts which mixed the copper powder to the iron powder with those of compacts which mixed the copper powder to the iron-copper alloy powder. The dilatometric curves were obtained below the sintering conditions, which heated up to 115$0^{\circ}C$ by a heating rate of 1$0^{\circ}C$/min, held for 60min at 115$0^{\circ}C$ and cooled down at a rate of 2$0^{\circ}C$/min to room temperature. The dilatometric curves of the compacts showed the different expansion behavior at temperatures above the copper melting point in spite of same chemical composition. All of the compacts of former case showed large expansion, but all of the compacts in latter case showed large contraction. The microstructures of sintered compacts also showed the different progress in alloying of the copper into the iron powder. Namely we could observe the segregation at alloy part of copper into iron powder in case of the sintered compacts, which mixed the copper powder to the iron powder, but could not observe the segregation in compacts which mixed the copper powder to the iron-copper alloy powder. But the penetration of liquid copper into the interstices between solid particles was occurred at both cases. Therefore, the showing of the different dimensional changes in the compacts in spite of same chemical composition is due to more the alloying of copper into iron powder than the penetration of liquid copper into the interstices between solid particles.
Keywords
Sintered compact; Iron-copper alloy; Abnormal expansion; Dilatometric curves;
Citations & Related Records
연도 인용수 순위
  • Reference
1 V. B. Phadke and B. L. Davies : Inter. J. of P/M and P/T, 13(1977) 253
2 T. Kranty : Inter. J. of Powder Metallurgy. 5, No. 3(1969) 35
3 H. Oikawa : Tech. ReP., Tohoku Univ. (1982)67
4 B. Bondi : Chem. Rev., 52(1953), 417
5 松村源太? : ?結機構 (紹末治金講座I) ‘日刊工業新聞社 (1964) 174
6 C. S. Smith : Grains, Phases and Interfaces, An Interpretation of Microstructure, Institute of Metals Division Lecture, New York Meeting, Feb.(1948)
7 T. J. Whaten, M. Humenik, Jr., Progress in Powder Metalurgy, 18(1962), 92
8 F. V. Lenel : Powder Metallurgy, MPIF (1980) 296
9 E. A. Brandes : Smithells Metals Reference Book (6th), Butterworths (1983) 11-219
10 東京天文臺 : 理科年表, 丸善(株) (1984) 463
11 P. Laurent and M. Eudier : Revue de Metallurgia, 6(1953) 382
12 P. Duwez and H. Martens, A Dilatometric Study of the Sintering of Metal Powder Compacts, Trans. AIME, 185(1949) , 571
13 F. J. Esper, K. H. Friese, R. Zeller : Stahl und Eisen, 19
14 J. F. Kuzmic, E. N. Mazza : J. of Metals, 118(1950), 1218
15 T. Kranty : : Inter. J. of Powder Metallurgy, 5(1969) 35
16 H. Silbereisen : Powder Metallurgy, W. Leszynsky(Ed.) Interscience, New York, London(1961) 611
17 N. Dautzenberg : Archiv F. D. Eisenhuttenwesen, 41(1970) 1005
18 渡?侊? : ??報告 '18(1966) 12
19 G. Bockstiegel : Stahl und Eisen, 79(1959) 33
20 G. Findeisen : Stahl und Eisen, 473
21 藤井康次 : 粉?および粉末冶金 '11(1964) 231
22 G.H. Price, C. J. Smithells and S. V. Williams : J. of the Inst. of Metals, 62(1938)239
23 P. U. Gummeson and L. Forss : The 11th Annual Meeting, Metal Powder Association, May(1955) 11 ; Precision Metal Molding, 13, October(1955) 55
24 渡?侊? : 粉体および粉末冶金 '8 (1961) 63
25 群馬 ‘要野 浜本 木村 : 粉?および粉末冶金 16 (1969) 150
26 D. Berner, H. E. Exner and G. Petzow : Morden Development of Powder Metalugy, 6(1974) 237
27 Y. Trudel, R. Augers : Int. J. of P/M and P/T, 11(1975) 5
28 渡?侊?, 川口雅史 : ??報告 ‘27 (1973) 65
29 N. C. Kothari and J. Waring : Powder Metallurgy, 7(1964) 13
30 P. Ramakrishnan and R. Lakshminarasimhan : Inter. J. of P/M, 3(1967) 63
31 Matsumura, G : Rep. Government Ind. Res, Inst. Nagoya, 5(1956) 438
32 三谷裕康 ‘西垣賢一 : 日本金???誌 ’32(1968) 478