Browse > Article

Fatigue Strength of Tensile Specimen with Butt Welded Joints  

Jo, Jae-Byung (경기대학교 토목환경공학부)
Publication Information
Abstract
Fatigue tests were carried out for butt welded joints with SM520-TMC steel plate with thickness between 20mm and 80mm. The test results were analysed statistically and the effect of plate thickness on the fatigue strength investigated. The fatigue strengths based on nominal stress range satisfy the requirement of the standards. Due to misalignment of the specimens, the measured stresses are higher than the nominal stresses especially for 20mm thick plates. If fatigue strengths are evaluated based on the measured stresses, then the fatigue strengths are greater than those based on nominal stresses. The results show that the thickness effect is similar to the formula proposed by Gurney.
Keywords
SM520TMC; butt welded joint; fatigue test; fatigue strength; thickness effect;
Citations & Related Records
연도 인용수 순위
  • Reference
1 김동규 (1991). 건축구조용 TMCP 극후강재의 성능평가에 관한 설험적 연구 (I), (II) 한국강구조학회 논문집 제3권 3호, pp50-58, 제3권 4호 pp. 62-67
2 용환선, 김석태, 조용식 (1996). HT60급 TMCP강 용접부 피로거동 한국강구조학회 논문집 제8권 4호, pp. 133-142
3 Gurney, T. R (1981). 'Some comments on fatigue design rules for offshore structures', Proc. 2nd international Symposium on Integrity of offshore Structures, Applied Sience Publishers, Barking, Essex, England, pp. 219-234
4 AASHTO (2002). LRFD bridge design spec. 2nd edition
5 Eurocode 3 (2003). prEN1993-1-9, Eurocode 3 Part 1.9 : Fatigue, stage 49 draft, May 2003
6 피로설계지침 : '강도로교의 피로설계지침' 일본도로협회
7 김영식 (1990). TMCP 강재의 용접성, 한국강구조학회논문집 제2권 4호, pp. 23-32
8 Gurney T. R. (1979). 'The influence of thickness on the fatigue strength of welded joints', Proc. 2nd International Conference on the Behavior of Offshore Structures, BHRA Fluid Engineering, Cranfield, Bedford, England, Vol. 1, Paper 41, pp. 523-534
9 대한토목학회 (2003). 'TMCP 강의 강교량 적용에 관한 설계기준 개발' 연구보고서
10 용환선, 김석태 (1995). TMCP강의 피로, 한국강구조학회 논문집 제7권 4호, pp. 193-202