Browse > Article
http://dx.doi.org/10.7234/composres.2021.34.3.167

Process Development of Metal-Composite Hybrid Structures  

Hwang, Hui-Yun (Dept. of Mechanical and Robotics Engineering, Andong National University)
Roney, Md. Fardim Sufian (Dept. of Mechanical Design Engineering, Andong National University)
Xi, Zhu (Dept. of Mechanical Design Engineering, Andong National University)
Publication Information
Composites Research / v.34, no.3, 2021 , pp. 167-173 More about this Journal
Abstract
Recently, metal-composite hybrid structures became a very attractive material system for various applications such as automobile and air vehicles due to their design flexibility as well as superior mechanical properties. On the other hand, recycling is a hot issue to reduce material wastes and environmental pollution, so that many countries made recycling regulations. But the recycling of metal-composite hybrid structures is not fully considered since the development and application are very early stage. We developed and optimized the recycling process for metal-composite hybrid structures based on the easy adaptation of the local recycling companies.
Keywords
Recycling; Composite Materials; Metals; Hybrid Structures;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Ishikawa, T., Amaoka, K., Masubuchi, Y., Yamamoto, T., Yamanaka, A., Arai, M., and Takahashi, J., "Overview of Automotive Structural Composites Technology Developments in Japan," Composites Science and Technology, Vol. 155, 2018, pp. 221-246.   DOI
2 DeMorro, C., "Next BMW 7 Series To Get Weight-Saving Carbon Fiber Core," Clean Technica, April 22, 2015.
3 Jung, I.L., Lee, M.Y., Jung, H.W., and Byun, D.Y., A Study on Enhancing Recycling of Plastics in End-of-Life Vehicles, Final Report of Korea Automotive Recycles Association, 2010.
4 Das, S., "Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design," SAE International Journal of Materials and Manufacturing, Vol. 7, No. 3, 2014, pp. 588-595.   DOI
5 Pickering, S.J., "Recycling Technologies for Thermoset Composite Materials-Current Status," Composites Part A: Applied Science and Manufacturing, Vol. 37, No. 8, 2006, pp. 1206-1215.   DOI
6 Gregoire, G., Dabsie, F., Dieng-Sarr, F., Akon, B., and Sharrock, P., "Solvent Composition of One-step Self-etch Adhesives and Dentine Wettability," Journal of Dentistry, Vol. 39, No. 1, 2011, pp. 30-39.   DOI
7 Mondal, M.K., Bose, B.P., and Bansal, P., "Recycling Waste Thermoplastic for Energy Efficient Construction Materials: An Experimental Investigation," Journal of Environmental Management, Vol. 240, 2019, pp. 119-125.   DOI
8 Holmes, M., "Carbon Composites Continue to Find New Markets," Reinforced Plastics, Vol. 61, No. 1, 2017, pp. 36-40.   DOI
9 Lu, Y., Broughton, J., and WIndfield, P., "A Review of Innovations in Disbonding Techniques for Repair and Recycling of Automotive Vehicles," International Journal of Adhesion and Adhesives, Vol. 50, No. 1, 2014, pp. 119-127.   DOI
10 Banea, M.D., da Silva, L.F.M., and Carbas, R.J.C., "Debonding on Command of Adhesive Joints for the Automotive Industry," International Journal of Adhesion and Adhesives, Vol. 59, No. 1, 2015, pp. 14-20.   DOI
11 Vincent, G.A., de Bruijn, T.A., Wijskamp, S., Abdul Rasheed, M.I., van Drongelen, M., and Akkerman, R., "Shredding and Sieving Thermoplastic Composite Scrap: Method Development and Analyses of the Fibre Llength Distributions," Composites Part B: Engineering, Vol. 176, 2019, Paper ID 107197.
12 Han, S.H., Hwang, H.Y., Bae, M.G., Park, S.E., and Chang, H.K., "Development of Separation Technology for Adhesively Bonded Hybrid Structures of Metals and Thermoplastic Composites Considering Recycling," Composites Research, Vol. 31, No.41, 2018, pp. 128-132.
13 Vattathurvalappil, S.H., and Haq, M., "Thermomechanical Characterization of Nano-Fe3O4 Reinforced Thermoplastic Adhesives and Single Lap-joints," Composites Part B: Engineering, Vol. 175, 2019, Paper ID. 107162.
14 Zhao, D., Ma, Y., and Yang, Y., "Flexural Damage Behavior of CF/PA6 Plain Woven Laminates with Different Layers," Composites Part B: Engineering, Vol. 162, 2019, pp. 631-642.   DOI
15 Jeon, H.S., Lee, H., Lee, K.H., and Baek, S.H., "Present Condition of End-of-Life Vehicles Recycling of Germany by EUCOM-Table," Journal of Korea Society of Waste Management, Vol. 32, No. 2, 2015, pp. 115-122.   DOI
16 Palmer, J., Ghita, O.R., Savage, L., and Evans, K.E., "Successful Closed-Loop Recycling of Thermoset Composites," Composites Part A: Applied Science and Manufacturing, Vol. 40, No. 4, 2009, pp. 490-498.   DOI
17 Srinivasan, D.V., Ravichandran, V., Idapalapati, S., "Failure Analysis of GFRP Single Lap Joints Tailored with a Combination of Tough Epoxy and Hyper-Elastic Adhesives," Composites Part B: Engineering, Vol. 200, 2020, Paper ID. 108255.
18 Blunck, E., Germany BMW's Sustainability Strategy of Evolution and Revolution Towards a Circular Economy, in Anbumozhi, V., and Kim, J. (eds.), Towards a Circular Economy: Corporate Management and Policy Pathways, ERIA Research Project Report 2014, pp. 75-92.
19 Graedel, T.E., Allwood, J., Birat, J.P., Hageluken, C., Reck, B.K., Sibley, S.F., and Sonnemann, G., "What Do We Know About Metal Recycling Rates?," Journal of Industrial Ecology, Vol. 15, No. 3, 2011, pp. 355-366.   DOI
20 Gaustad, G., Olivetti, E., and Kirchain, R., "Improving Aluminum Recycling: A Survey of Sorting and Impurity Removal Technologies," Resources, Conservation and Recycling, Vol. 58, No. 1, 2012, pp. 79-87.   DOI
21 Song, Y.S., Youn, J.R., and Gutowski, T.G., "Life Cycle Energy Analysis of Fiber-Reinforced Composites," Composites Part A: Applied Science and Manufacturing, Vol. 40, No. 8, 2009, pp. 1257-1265.   DOI
22 Yang, Y., Boom, R., Irion, B., van Heerden, D., Kuiper, P., and de Wit, H., "Recycling of Composite Materials," Chemical Engineering and Processing: Process Intensification, Vol. 51, No. 1, 2012, pp. 53-68.   DOI
23 Leijonmarch, S., Cornell, A., Danielsson, C., Akermark, T., Brandner, B.D., and Lindbergh, G., "Electrolytically Assisted Debonding of Adhesives: An Experimental Investigation," International Journal of Adhesion and Adhesives, Vol. 32, No. 1, 2012, pp. 39-45.   DOI