Browse > Article
http://dx.doi.org/10.7234/composres.2020.33.6.401

A Study on Fracture Property of Adhesive Interface at Tapered Double Cantilever Beam with Inhomogeneous Composite Material due to Loading Conditions of In-plane and Out-plane  

Lee, Jung-Ho (Kongju National University, Graduate School, Department of Mechanical Engineering)
Kim, Jae-Won (Kongju National University, Graduate School, Department of Mechanical Engineering)
Cheon, Seong-Sik (Kongju National University, Division of Mechanical & Automotive Engineering)
Cho, Jae-Ung (Kongju National University, Division of Mechanical & Automotive Engineering)
Publication Information
Composites Research / v.33, no.6, 2020 , pp. 401-407 More about this Journal
Abstract
At the engineering and industrial areas, the lightweight composite material has been substituted with the metals, such as steel at the structural parts. This composite material has been applied by the adhesive bonding method, as well as the joint methods with rivets, welds or bolts and nuts. The study on the strength characteristics of adhesive interface is necessarily required in order to apply the method to composite materials. CFRP specimens as the fiber reinforced plastic composites were manufactured easily and this study was carried out. The static experiments were performed under the loading conditions of in-plane and out-plane shears with the inhomogeneous composite TDCB specimens with CFRP, aluminum (Al6061), and aluminum foam (Al-foam). Through the result of this study, the durability on the inhomogeneous composite structure with adhesive interface was investigated by examining the fracture characteristic and the point in time.
Keywords
Loads of in-plane and out-plane; Composite material; Adhesive interface; Static fracture; Tapered double cantilever beam;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Park, J.W., Cheon, S.S., and Cho, J.W., "A Study on Fracture Behavior of Center Crack at Unidirectional CFRP due to Stacking Angle", The Journal of the Korean Society for Composite Materials, Vol. 29, No. 6, 2016, pp. 342-346.
2 Park, S.O., "Fatigue Crack Growth Properties of Epoxy Adhesives under Mode I Loading", Journal of Korean Society of Mechanical Technology, Vol.16 No. 1, 2014, pp. 1055-1062.   DOI
3 Blackman, B.R.K., Hadavinia, H., Kinloch, A.J., Paraschi, M., and Williams, J.G., "The Calculation of Adhesive Fracture Energies in Mode I: Revisiting the Tapered Double Cantilever Beam (TDCB) Test", Engineering Fracture Mechanics, Vol. 70, No. 2, 2003, pp. 233-248.   DOI
4 Lee, J.H., Cho, J.U., and Cheon, S.S., "An Investigation on the Behavior of Fracture Mechanics as the Type of Mode I at Specimen Bonded with Tapered Carbon Fiber Reinforced Plastic", The Journal of the Korean Society for Composite Materials, Vol. 29, No. 2, 2016, pp. 85-89.
5 Lee, J.H., Cho, J.U., Cheon, S.S., and Kook, J.H., "Fracture Behaviour Analysis of the Crack at the Specimen with the Type of Mode I Composed of the Bonded Carbon Fiber Reinforced Plastic", The Journal of the Korean Society for Composite Materials, Vol. 28, No. 6, 2015, pp. 356-360.
6 Lee, J.H., Cho, J.U., Cheon, S.S., and Kook, J.H., "A Fracture Study on the Bonded DCB Specimen of the Mode III Type with Aluminum Foam", The Journal of the Korean Society for Composite Materials, Vol. 28, No. 4, 2015, pp. 191-196.
7 Hwang, G.W., A Study on the Fracture Behaviour of Bonded Interface at CFRP DCB Composite of Modes I and II Applied with Laminar Angle, Master Thesis, Kongju National University, Korea, 2018.
8 Lee, J.H., Choi, H.K. Kim, S.S., Cho, J.U., Zhao, G., Cho, C., and Hui, D., "A Study on Fatigue Fracture at Double and Tapered Cantilever Beam Specimens Bonded with Aluminum Foams", Composites Part B: Engineering, Vol. 103, 2016, pp. 139-145.   DOI
9 Park, J.W., A Characteristic Study on the Safety of CFRP Light Material and the Fracture of Adhesive Interface at In-plane and Out-plane Shears, Master Thesis, Kongju National University, Korea, 2019.
10 Cho, H.K., "Optimization of Joint Hole Position Design for Composite Beam Clamping", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, 2019, pp. 14-21.
11 Kim, G.H., "Prototype Product Based on the Functional Test of ANG Fuel Vessel Applied to Composite Carbon Fiber", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, 2019, pp. 7-13.
12 Sun, H.P., and Cho, J.U., "Fatigue Analysis and Experimental Verification at Tapered Double Cantilever Beam(TDCB) Model of Aluminum Foam", Journal of the Korean Society of Mechanical Technology, Vol. 16, No. 6, 2014, pp. 2009-2014.   DOI
13 Determination of the Mode I Adhesive Fracture Energy GIC of Structure Adhesives Using the Double Cantilever Beam (DCB) and Tapered Double Cantilever Beam (TDCB) Specimens, British Standard, BS 7991, Imperial College of Science and Technology (JISC), pp. 3-13, 2001.
14 ISO 11343, International Standards Organization, Geneva, Switzerland 1993.