Browse > Article
http://dx.doi.org/10.7234/composres.2016.29.2.085

An Investigation on the Behavior of Fracture Mechanics as the Type of Mode I at Specimen Bonded with Tapered Carbon Fiber Reinforced Plastic  

Lee, Jung-Ho (Department of Mechanical Engineering, Graduate School, Kongju National University)
Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
Cheon, Seong Sik (Division of Mechanical & Automotive Engineering, Kongju National University)
Publication Information
Composites Research / v.29, no.2, 2016 , pp. 85-89 More about this Journal
Abstract
This paper aims at estimating the fracture behavior at the bonded part of composite material. CFRP is manufactured as the type of TDCB. The static analysis of Mode 1 due to the configuartion factor of m is carried out. Four kinds of specimens have the configuartion factor(m) of 2, 2.5, 3 and 3.5. As the study result, the displacements at specimens are shown to be similar each other in these four cases. At m of 3.5, the reaction force becomes highest as 412 N and is shown to be improved as much as 14% by comparing m of 2. The data on defection of the bonded interface and reaction force are thought to be contributed to the structural design of CFRP and the safe design.
Keywords
Carbon fiber reinforced plastic; TDCB; Fracture behaviour; Adhesive interface; Equivalent stress;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Boang, S.O., Kim, K.S., Kim, S.H., Song, S.G., and Cho, J.U., "Study on Compression Test of Aluminum Foam and Honeycomb Sandwich Composites", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 12, No. 9, 2011, pp. 3802-3807.   DOI
2 Blackman, B.R.K., Hadavinia, H., Kinloch, A.J., Paraschi, M., and Williams, J.G., "The Calculation of Adhesive Fracture Energies in Mode I: Revisiting the Tapered Double Cantilever Beam (TDCB) Test", Engineering Fracture Mechanics, Vol. 70, No. 2, 2003, pp. 233-248.   DOI
3 De Giorgi, M., Carofalo, A., Dattoma, V., Nobile, R., and Palano, F., "Aluminum Foams Structural Modelling", Computers & Structures, Vol. 88, Issues 1-2, 2010, pp. 25-35.   DOI
4 Shin, K.B. and Koo, D.H., "A Study on the Evaluation of the Failure for Carbody Structures Made of Laminated Fiber-reinforced Composite Materials Using Total Laminate Approach", Korean Society for Composite Materials, Vol. 17, No. 1, 2004, pp. 18-28.
5 Blackman, B.R.K., Dear, J.P., Kinloch, A.J., MacGillivray, H., Wang, Y., Williams, J.G., and Yayla, P., "The Failure of Fibre Composites and Adhesively Bonded Fibre Composites under High Rates of Test Part III Mixed-mode I/II and Mode II Loadings", Journal of Materials Science, Vol. 31, No. 17, 1996, pp. 4467-4477.   DOI
6 Hashemi, S., Kinloch, A.J., and Williams, J.G., "The Analysis of Interlaminar Fracture in Uniaxial Fibre-polymer Composites", Proc. R. Soc. Lond. Vol. 427, No. 1872, 1990, pp. 173-199.   DOI
7 Paul, A. and Ramamurty, U., "Strain Rate Sensitivity of a Closed-cell Aluminum Foam", Materials Science and Engineering: A, Vol. 281, Issues 1-2, 2000, pp. 1-7, April.   DOI
8 Mohamed, M., Anandan, S., Huo, Z., Birman, V., Volz, J., and Chandrashekhara, K., "Manufacturing and Characterization of Polyurethane Based Sandwich Composite Structures", Composite Structures, Vol. 123, 2015, pp. 169-179.   DOI
9 Marzi, S., Biel, A., and Stigh, U., "On Experimental Methods to Investigate the Effect of Layer Thickness on the Fracture behavior of Adhesively Bonded Joints", International Journal of Adhesion and Adhesives, Vol. 31, No. 8, 2011, pp. 840-850.   DOI
10 Jung, J.W., Kim, S.H., Park, J.K., and Lee, W.I., "Research of the Development of the Properties of PLA Composites for Automatic Interior Parts", Korean Society for Composite Materials, Vol. 24, No. 3, 2011, pp. 1-5.
11 Kim, S.S. and Cho, J.U., "Study on Structural Analysis of TDCB Model Bonded with Aluminum Foam Composite", Journal of Korea Society of Mechanical Technology, Vol. 15, No. 1, pp. 123-128, Feb. 2013.   DOI
12 Lee, C.J., Lee, S.K., Ko, D.C., and Kim, B.M., "Evaluation of Adhesive Properties Using Cohesive Zone Model : Mode I", Transactions of the Korean Society of Mechanical Engineers, Vol. A 33, No. 5, pp. 474-481, 2009.   DOI