|
1 |
Predicting Deformation Behavior of Additively Manufactured Ti-6Al-4V Based on XGB and LGBM
Cheon, S.;Yu, J.;Kim, J.G.;Oh, J.S.;Nam, T.H.;Lee, T.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.173-178,
|
|
2 |
Optimal Post Heat-treatment Conditions for Improving Bonding Strength of Roll-bonded 3-ply Ti/Al/Ti Sheets
Kim, M.H.;Bong, H.J.;Kim, J.H.;Lee, K.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.179-185,
|
|
3 |
Evaluation of Wear Characteristics on Ti/Cr PVD Coatings of Cold Press Die for the Forming of UHSS
Heo, J.Y.;Youn, K.T.;Song, J.S.;Kang, I.S.;Yoon, I.C.;Park, C.D.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.186-193,
|
|
4 |
True Stress-True Strain Curve Fitting Methodology for Finite Element Analysis
Kim, Y.J.;Gu, G.H.;Seo, M.H.;Kim, H.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.194-199,
|
|
5 |
Effect of Strain Rate Sensitivity and Mesh Size on Constitutive Equation Fitting Using Finite Element Analysis
Gu, G.H.;Kim, Y.;Seo, M.H.;Kim, H.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.200-206,
|
|
6 |
Effect of Austenitizing Temperature and Cooling Rate on Microstructure and Hardness of Low-carbon SCM415 Steel
Lee, J.U.;Lee, G.M.;Cha, J.W.;Park, S.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.207-213,
|
|
7 |
Yield Functions Based on the Stress Invariants J2 and J3 and its Application to Anisotropic Sheet Materials
Kim, Y.S;Nguyen, P.V.;Kim, J.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.214-228,
|
|
8 |
Study on the Surface Defect Classification of Al 6061 Extruded Material By Using CNN-Based Algorithms
Kim, S.B.;Lee, K.A.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.229-239,
|
|
9 |
Effect of High-Temperature Sintering Condition on Microstructure Evolution of Pure-Cu Subjected to Metal Injection Molding
Han, D.I.;Suhartono, T.;Kim, D.J.;Lee, E.H.;Kim, J.H.;Ko, Y.G.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.31, no.4, pp.240-245,
|
|