|
| 1 |
Numerical and Experimental Study of U-Bending of SUS304L Heat Transfer Tubes
Kim, Y.B.;Kang, B.S.;Ku, T.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.23, no.7, pp.405-412,
|
|
| 2 |
FEA and Experiment Investigation on the Friction Reduction for Ultrasonic Vibration Assisted Deep Drawing
Kim, S.W.;Son, Y.G.;Lee, Y.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.23, no.7, pp.413-418,
|
|
| 3 |
Optimized Design of a Cold Plate Heat Sink using FEM and Optimization
Hong, S.;Seo, H.;Kim, J.;Sim, J.;Hwang, J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.23, no.7, pp.419-424,
|
|
| 4 |
Prediction of Plastic Deformation Behavior of the Side Surface of Slab during Hot Rough Rolling
Jeong, J.H.;Lee, K.H.;Lee, S.B.;Lee, I.K.;Lee, S.H.;Kim, H.J.;Lee, K.Y.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.23, no.7, pp.425-430,
|
|
| 5 |
Design of a Free Bulge Test Coil Using Electromagnetic Forces and Comparison between Experimental and Numerical Results
Kim, H.K.;Noh, H.G.;Kang, B.S.;Kim, J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.23, no.7, pp.431-438,
|
|
| 6 |
An Effective Compensation Method of Press Tool Geometry for Stamping a Ultra High Strength Steel Center-pillar after Heat Treatment
Lee, T.G.;Kwak, J.H.;Kim, S.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.23, no.7, pp.439-445,
|
|
| 7 |
Investigation of the Prediction Accuracy for the Stamping CAE of Thin-walled Automotive Products
Jung, D.G.;Kim, S.H.;Rho, J.D.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.23, no.7, pp.446-452,
|
|