|
| 1 |
Influence of Clearance in Half-piecing of Sheet Metal
Yeon, S.M.;Lee, S.K.;Chung, W.J.;Kim, J.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.437-441,
|
|
| 2 |
Improvement of Dimensional Accuracy for a Solenoid Valve Case for an 8-Speed Automatic Transmission by Using Multistage Drawing
Kim, T.H.;Bae, W.B.;Bae, J.H.;Kim, C.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.442-449,
|
|
| 3 |
A Physically Based Dynamic Recrystallization Model for Predicting High Temperature Flow Stress
Lee, H.W.;Kang, S.H.;Lee, Y.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.450-455,
|
|
| 4 |
Forging of 1.9wt%C Ultrahigh Carbon Workroll : Part I - Analysis on Void Formation and Microstructure
Lim, H.C.;Lee, H.;Kim, B.M.;Kang, S.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.456-462,
|
|
| 5 |
Forging of 1.9wt%C Ultrahigh Carbon Workroll : Part II - Void Closure and Diffusion Bonding
Kang, S.H.;Lim, H.C.;Lee, H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.463-469,
|
|
| 6 |
Prediction of Shape Recovery for Ni-Ti SMA Wire after Drawing
Kim, S.H.;Lee, K.H.;Lee, S.B.;Yeom, J.T.;Park, C.H.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.470-476,
|
|
| 7 |
Investigation of Shape Accuracy in the Forming of a Thin-walled S-rail with Classification of Springback Modes
Jung, D.G.;Kim, S.H.;Kim, M.S.;Lee, T.G.;Kim, H.K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.477-485,
|
|
| 8 |
Numerical Study of the Butting Process for a AZ31B Magnesium Alloy Tube
Han, S.S.;Lee, M.Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.22, no.8, pp.486-491,
|
|