|
| 1 |
Compressive and Bending Behaviors of the Shielded Slot Plate Considering Forming Effect for Fuel Cell Application
Lee, C.W.;Yang, D.Y.;Kang, D.W.;Chang, I.G.;Lee, T.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.341-347,
|
|
| 2 |
Influence of Drawing Speed and Blank Holding Force in Rectangular Drawing of Ultra Thin Sheet Metal
Lee, J.H.;Chung, W.J.;Kim, J.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.348-353,
|
|
| 3 |
Tensile and High Cycle Fatigue Properties of Ion-nitrided and Nitro-carburized SCr430B Steels
Park, S.H.;Lee, C.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.354-359,
|
|
| 4 |
Effects of Forming Depth on the Deformation Behavior of Cup-like Tubes in Tube Spinning Process
Shin, Y.C.;Yoon, D.J.;Lim, S.J.;Choi, H.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.360-365,
|
|
| 5 |
Multi-scale Modeling of Plasticity for Single Crystal Iron
Jeon, J.B.;Lee, B.J.;Chang, Y.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.366-371,
|
|
| 6 |
Evaluation of Anisotropic Hardening Models using Two-Step Tension Tests
Ha, J.;Lee, M.G.;Barlat, Frederic;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.372-377,
|
|
| 7 |
Bending Characteristics of DP980 Steel Sheets by the Laser Irradiation
Song, J.H.;Zhang, Y.;Lee, J.S.;Park, S.J.;Choi, D.S.;Lee, G.A.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.378-383,
|
|
| 8 |
Investigation of Springback Behavior of DP780 Steel Sheets after the U-bending Process
Choi, M.K.;Huh, H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.6, pp.384-388,
|
|