|
| 1 |
Localized Necking in a Round Tensile Bar for a HCP Material Considering Tension-compression Asymmetry in Plastic Flow
Yoon, J.H.;Lee, J.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.285-290,
|
|
| 2 |
Effect of Back Tension in Multi-pass Drawing on the Central Bursting Defect
Lee, S.W.;Kim, M.C.;Shim, G.H.;Joun, M.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.291-297,
|
|
| 3 |
Simulation of the Forming Process of the Shielded Slot Plate for the Molten Carbonate Fuel Cell Using a Ductile Fracture Criterion
Lee, C.W.;Yang, D.Y.;Lee, S.R.;Kang, D.W.;Chang, I.G.;Lee, T.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.298-304,
|
|
| 4 |
Forming Analysis of A5083 Thick Plate for Moss Spherical LNG Tank and Prediction of Springback
Yoon, J.H.;Jeon, H.W.;Lee, J.H.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.305-311,
|
|
| 5 |
A Study on Performance Improvement of Electrical Discharge Machining for Producing Micro-holes Using a Shot Blasting Surface Treatment
Jang, H.S.;Kim, H.S.;Shin, K.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.312-318,
|
|
| 6 |
A Study of Multiple Scale FEM Modeling for Prediction of Inner Void Closing Behavior in Open Die Forging Process
Kwak, E.J.;Kang, G.P.;Lee, K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.319-323,
|
|
| 7 |
Microstructure and Yield Asymmetry Behavior of Indirect-extruded Mg-Sn-Al-Zn Alloys
Park, S.H.;Kim, Y.M.;Kim, H.S.;Yim, C.D.;You, B.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.324-329,
|
|
| 8 |
A Study on the Characteristics of Salt Spray Test of Roll Formed and Zn-Ni Electrodeposited Steel Bolts
Hamrakulov, B.;Son, Y.H.;Kim, I.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.5, pp.330-335,
|
|