|
1 |
Biaxial Compressive Deformation Characteristics of Round Aluminum Pipe
Yoo, C.K.;Kim, K.J.;Won, S.T.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.89-95,
|
|
2 |
Cycle Time Reduction with Automated Gate Cutting Mechanism and Injection/Compression Molding for Producing Mobile LGP
Min, I.K.;Kim, J.S.;Yoon, K.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.96-100,
|
|
3 |
A multi Step Cure Process to Prevent Residual Bubbles in LED Encapsulation Silicone Resin
Song, M.J.;Kim, H.K.;Yoon, G.S.;Kim, K.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.101-106,
|
|
4 |
The Effects of Processing Variables on Gas Penetration in Gas-Assisted Powder Injection Molding(GAPIM)
Kim, D.H.;Park, H.P.;Lee, K.H.;Cha, B.S.;Choi, J.H.;Rhee, B.O.;Tovar, Jorge A.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.107-112,
|
|
5 |
A Comparative Study of Failure Criteria for Magnesium Alloy Sheet under Warm Press Forming Condition
Kim, H.K.;Kim, J.D.;Heo, Y.M.;Kim, W.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.113-118,
|
|
6 |
Effect of Material Flow Direction on the Replication Characteristics of the Ultrasonic Patterning Process
Seo, Y.S.;Lee, K.Y.;Park, K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.119-125,
|
|
7 |
Influence of Micro-Pattern Replication Ratio of Injection-Molded Light Guide Plate on Optical Aspect of LCD
Hong, J.P.;Joo, B.Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.126-130,
|
|
8 |
Development of Fin Expansion Type Cooling System using Heat Pipes for LED Lightings
Jung, T.S.;Kang, H.K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.131-137,
|
|
9 |
Characteristics of MR Polishing using Carbonyl Iron Particles Coated with Xanthan Gum
Lee, J.W.;Ha, S.J.;Shin, B.C.;Kim, D.W.;Cho, M.W.;Choi, H.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.21, no.2, pp.138-143,
|
|