|
1 |
Historical Background and Study of Advance in Engineering in Europe and USA
Lee, Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.393-408,
|
|
2 |
Numerical Analysis and Experimental Evaluation on Formability of Membrane for LNG Storage Tank
Noh, H.G.;Jung, J.Y.;Ku, T.W.;Kang, B.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.409-419,
|
|
3 |
Forming Condition for Automotive Body Outer Panel using Aluminum Alloy Sheet for Improved Dent Resistance
Ko, S.J.;Kim, T.J.;Kim, I.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.420-426,
|
|
4 |
A Local Softening Method for Reducing Die Load and Increasing Service Life in Trimming of Hot Stamped Part
Choi, H.S.;Lim, W.S.;Kang, C.G.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.427-431,
|
|
5 |
Shear Spinning of Ti-6Al-4V Alloy at Hot Working Temperature
Lee, H.S.;Song, Y.B.;Hong, S.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.432-438,
|
|
6 |
Deformation Technology for Thick Plate Using Single Pass Line Heating by High Frequency Induction Heating
Lee, K.S.;Eom, D.H.;Kim, C.W.;Pyun, S.Y.;Son, D.H.;Gong, G.Y.;Kim, B.M.;Lee, J.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.439-449,
|
|
7 |
Prediction of Initial Design Parameter of Rectangular Shaped Mold Spring Using Finite Element Method
Lee, H.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.450-455,
|
|
8 |
Quantitative Analysis of Elastic Recovery Behavior after Bending of Ultra High Strength Steel Sheet: Spring-back or Spring-go
Kwak, E.J.;Lee, K.;Suh, C.H.;Lim, Y.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.456-460,
|
|
9 |
Precision Simulation of Drawing Processes Considering Back Pressing or Tension with Artificial Body Force Scheme
Eom, J.G.;Shim, S.H.;Cho, J.M.;Kim, H.S.;Joun, M.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.20, no.6, pp.461-467,
|
|