|
1 |
Experimental Verification of Equivalent Drawbead Model and Application to Auto-Body Stamping Analysis
Moon, S.J.;Lee, J.Y.;Keum, Y.T.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.371-376,
|
|
2 |
Study of Edge Crack Growth According to Rolling Condition in Cold Rolling
Cui, X.Z.;Lee, S.H.;Lee, S.J.;Lee, J.B.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.377-384,
|
|
3 |
Joint Design of Steel-Aluminum Power Steering Cylinder by using FE Analysis with Cohesive Zone Model
Lee, C.J.;Lee, S.K.;Ko, D.C.;Schafer, H.;Lee, J.M.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.385-391,
|
|
4 |
Effect of Shape Parameters of Tool on Improvement of Joining Strength in Clinching
Kim, J.Y.;Lee, C.J.;Lee, S.K.;Ko, D.C.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.392-400,
|
|
5 |
Effect of Mixing Condition of Raw Materials on the Thermal Properties of the Exothermic & Insulating
Kim, D.J.;Shin, D.Y.;Byun, S.Y.;Wi, C.H.;Hong, S.H.;You, B.D.;Oh, S.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.401-409,
|
|
6 |
Analysis of Friction Coefficient Dependent on Variation of Steel Grade and Reduction Ratio in High Temperature Rolling Process
Her, J.;Lee, H.J.;Na, D.H.;Lee, Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.410-415,
|
|
7 |
Study on the Yield Locus of Aluminum Alloy Sheet Using Biaxial Cruciform Specimens
Shin, H.D.;Park, J.G.;Park, C.D.;Kim, Y.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.416-421,
|
|
8 |
Measurements of Micro-Defects in the Aluminum Thixoformed Part using Computed Tomography(CT) Technology
Lee, S.Y.;Kim, C.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.5, pp.422-427,
|
|