|
| 1 |
Development of Application Technology of Pre-Coated Metal for Fuel Tank of versatile Engine
Fukai, N.;Kimura, S.;Kamiyama, S.;Shinoda, A.;Kanai, H.;Ueda, K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.99-106,
|
|
| 2 |
Influence upon Machining Accuracy of Micro-Pattern Roll Mold Processed by Temperature Variation
Je, T.J.;Park, S.C.;Lee, K.W.;Noh, J.S.;Choi, D.S.;Whang, K.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.107-111,
|
|
| 3 |
Warm Formability Variation of AZ31 Sheet by Double Stage Forming Velocity
Kim, H.K.;Kim, J.D.;Heo, Y.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.112-115,
|
|
| 4 |
Texture and Formability Development of Non-lubrication Rolled Al Alloy Sheet
Akramov, Saidmurod;Kim, In-Soo;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.116-121,
|
|
| 5 |
A New Runner System Melt-Buffer for Filling Balance in Injection Mold
Jeong, Y.D.;Jang, M.K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.122-127,
|
|
| 6 |
Ray Tracing of a Plastic Aspheric Lens by Considering Index Distribution Induced from Injection Molding
Eom, Hye-Ju;Park, Keun;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.128-134,
|
|
| 7 |
The Development of the Optimum Mould Design System by Utilizing Simulation and Modeler
Lim, C.H.;Kwak, S.Y.;Cho, I.S.;Hwang, H.Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.135-143,
|
|
| 8 |
The Cutting Process Monitoring of Micro Machine using Multi Sensor
Shin, B.C.;Ha, S.J.;Kang, M.H.;Heo, Y.M.;Yoon, G.S.;Cho, M.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.144-149,
|
|
| 9 |
An Analysis of Closed Die Forging of Laser Printer Shaft by Finite Element Method
Cho, S.H.;Shin, M.S.;Kim, J.H.;Ra, S.W.;Kim, J.B.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.150-155,
|
|
| 10 |
Computer Simulation of Coating Behavior Including Air for Various Coater Geometries and Operational Conditions
Kim, H.Y.;Lyu, M.Y.;Choi, J.G.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.156-159,
|
|
| 11 |
A Study on the Runner and Gate Consequence of Manufacture Double Shot Molding using CAE
Kim, O.R.;Cha, B.S.;Lee, S.Y.;Kim, Y.G.;Woo, C.K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.160-165,
|
|
| 12 |
A Basic Study on Burr Formation of Micro Cutting Process with the Ferrous Metal at tow Temperature
Kim, G.H.;Kim, D.J.;Sohn, J.I.;Yoon, G.S.;Heo, Y.M.;Cho, M.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.166-171,
|
|
| 13 |
Tool Mark Removal Method of Aspherical Glass tens Mold by Reverse-rotational Eccentric Motion
Lee, H.C.;Kim, J.U.;Kang, H.H.;Kim, D.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.172-176,
|
|
| 14 |
A Study of Outsell Molding Technology for Thin-walled Plastic Part
Lee, S.H;Ko, Y.B.;Lee, J.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.18, no.2, pp.177-182,
|
|