|
1 |
Applications in Joinning of Shot Pinning Technology
Harada, Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.541-549,
|
|
2 |
Recent Tendency of Al Forging in Japan
Sakurai, H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.550-557,
|
|
3 |
Prediction of Creep Deformation and Short Time Rupture Life of AZ31 Magnesium Alloy below 0.5Tm
Kang, D.M.;An, J.O.;Jeon, S.H.;Koo, Y.;Sim, S.B.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.558-563,
|
|
4 |
Strain Hardening Behavior in the Tube Hydroforming
Park, H.K.;Yim, H.S.;Yi, H.K.;Kim, K.S.;Moon, Y.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.564-569,
|
|
5 |
Numerical and Experimental Study on Plate Forming Process using Flexible Die
Heo, S.C.;Seo, Y.H.;Park, J.W.;Ku, T.W.;Kim, J.;Kang, B.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.570-578,
|
|
6 |
On the Role of Kinematic Hardening Rules in Predicting Relaxation Behavior
Ho, Kwang-Soo;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.579-585,
|
|
7 |
Experimental Study on the Formability of Simultaneous Deep Drawing of Circular and Rectangular Cups with AZ31 Magnesium Alloy
Kwon, K.T.;Kang, S.B.;Kang, C.G.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.586-593,
|
|
8 |
Development of Synthetic Jet Micro Air Pump
Choi, J.P.;Kim, K.S.;Seo, Y.H.;Ku, B.S.;Jang, J.H.;Kim, B.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.594-599,
|
|
9 |
Process Planning and Die Design for the Super Hot Forging Product, the Piston Crown Used in Marine Engine
Hwang, B.C.;Lee, W.H.;Bae, W.B.;Kim, C.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.600-606,
|
|
10 |
Modeling and Controlling of Surface Defect Initiation and Growth in Groove Rolling
Na, D.H.;Lee, Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.607-612,
|
|
11 |
Development of One-Piece Lower Control Arm Based on Taguchi Optimization Method
Oh, Seung-Taik;Lee, Doo-Hwan;Han, Do-Suck;Jang, Yong-Min;Kim, Dae-Yong;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.613-618,
|
|
12 |
Minimization of Crop Length by Sizing Press in Hot Rolling Mill
Heo, S.J.;Lee, S.H.;Lee, S.J.;Lee, J.B.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.619-626,
|
|
13 |
Design of the Cross Sectional Shape of Intermediate Die for Shaped Drawing of Spline
Lee, J.E.;Lee, T.K.;Lee, S.K.;Kim, B.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.627-632,
|
|
14 |
A Study on the Plate-Type Polymer Hyperfine Pit Structure Fabrication and Mechanical Properties Measurement by Using Thermal-Nanoindentation Process
Lee, E.K.;Kang, C.G.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.633-642,
|
|
15 |
Numerical Analysis on the High Speed Precision Press for Ultra-thin Sheet Metal Forming
Kang, J.J.;Kim, J.E.;Hong, S.K.;Kim, J.D.;Heo, Y.M.;Cho, C.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.643-648,
|
|
16 |
Finite Element Analysis on the Springback in the Forging-Bending of Metal Micro-Wire
Kang, J.J.;Hong, S.K.;Jeon, B.H.;Pyo, C.R.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.649-656,
|
|
17 |
Molding Stability of Hydro-Mechanical High Speed Injection Molding for Thin-Wall(0.3mm) LGP
Hwang, C.J.;Kim, J.S.;Oh, J.G.;Jeong, C.;An, H.J.;Heo, Y.M.;Kim, J.D.;Yoon, K.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.657-661,
|
|
18 |
The Energy Saving and the Reproducibility of Highly-Efficient Injection Molding Machine
Hwang, C.J.;Kim, J.S.;Jeong, C.;An, H.J.;Heo, Y.M.;Kim, J.D.;Yoon, K.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.17, no.8, pp.662-667,
|
|