|
1 |
A Study on Profile Ring Rolling Process of Titanium Alloy
Yeom, J.T.;Kim, J.H.;Lee, D.G.;Park, N.K.;Choi, S.S.;Lee, C.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.223-228,
|
|
2 |
A Study on Improvement of Birefringence Characteristics of Injection-Molded Plastic Parts by Rapid Mold Heating
Park, Keun;Kim, Byung H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.229-233,
|
|
3 |
Constitutive Modeling of AZ31B Magnesium Alloys
Lee, M.G.;Chung, K.;Kim, H.Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.234-238,
|
|
4 |
Process Design of Superplastic Forming/Diffusion Bonding by Using Step-by-step Pressurization
Song, J.S.;Kang, Y.K.;Hong, S.S.;Kwon, Y.N.;Lee, J.H.;Kim, Y.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.239-243,
|
|
5 |
The Influence of Powder Compaction Pressure on Density and Dimension of a Powder Metallurgy Product
Cho, J.H.;Kwon, Y.S.;Chung, S.T.;Lee, M.C.;Joun, M.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.244-249,
|
|
6 |
Improvement of Roll Profile Prediction Model in Hot Strip Rolling
Chung, J.S.;You, J.;Park, H.D.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.250-253,
|
|
7 |
Development of Door Outer Panel using High Strength Steel Sheet for Improving Dent Resistance
Kim, I.S.;Kim, T.J.;Jung, Y.I.;Yoon, C.S.;Lim, J.D.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.254-259,
|
|
8 |
An Application of Non-linear Viscoelastic Model to Capillary Extrusion of Rubber Compounds
Choi, S.H.;Lyu, M.Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.260-265,
|
|
9 |
Development of Rotor Shaft Manufacturing Process using a Large Friction Welding
Jeong, H.S.;Lee, N.K.;Park, H.C.;Choi, S.K.;Cho, J.R.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.266-270,
|
|
10 |
The Fluidity of the Recycled Thermoplastic Elastomer on the Injection Molding Process
No, B.S.;Han, S.R.;Jeong, Y.D.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.271-275,
|
|
11 |
Computer Simulation of Hemispherical Sheet Forming Process Using Crystal Plasticity
Shim, J.G.;Keum, Y.T.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.276-281,
|
|
12 |
Induction Heating Apparatus for Rapid Heating of Flat-Type Metallic Mold in Hot Embossing
Hong, S.K.;Lee, S.H.;Heo, Y.M.;Kang, J.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.282-287,
|
|
13 |
A Study on Warm Forging of Magnesium Alloy Impeller
Kim, S.D.;Kwon, Y.N.;Lee, J.H.;Kang, S.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.288-292,
|
|
14 |
A study on Cavity Closure Behavior During Hot Open Die Forging Process
Kwon, Y.C.;Lee, J.H.;Lee, S.W.;Jung, Y.S.;Kim, N.S.;Lee, Y.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.293-298,
|
|
15 |
Sliding Wear Mechanism of Ultra-Fine Grained Low Carbon Dual Phase Steel as a Function of Applied Load
Yu, H.S.;Yi, S.K.;Shin, D.H.;Kim, Y.S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.299-303,
|
|
16 |
Analysis of Failure Phenomena in Uni-axial Tension Tests of Friction Stir Welded AA6111-T4, AA5083-H18 and DP-Steel
Park, S.;Um, K.;Ma, N.;Ahn, K.;Chung, K.H.;Kim, Chong-Min;Okamoto, Kazutaka;Wagoner, R.H.;Chung, K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.304-308,
|
|
17 |
High Temperature Deformation Behavior and Estimation for Formability of Zr55Cu30Al10Ni5 Bulk Metallic Glass
Jun, H.J.;Lee, K.S.;Chang, Y.W.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.309-312,
|
|
18 |
Development of Green-Sheet Measurement Algorithm by Image Processing Technique
Pyo, C.R.;Yang, S.M.;Kang, S.H.;Yoon, S.M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.313-316,
|
|
19 |
Analysis on the Mechanism of Fluting in the Bending of Low Carbon Steels
Park, K.C.;Yoon, J.B.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.317-322,
|
|
20 |
Measurement of the Residual Stress in the Steel Wires by using Focused Ion Beam and Digital Image Correlation Method
Yang, Y.S.;Bae, J.G.;Park, C.G.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.4, pp.323-328,
|
|