|
| 1 |
A Study on the Molding Technology for the Preform of Blow Molding Through Compression Molding
Choi, S.H.;Min, H.K.;Lyu, M.Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.3-8,
|
|
| 2 |
Surface Heating Method Using Hot Jet Impingement for Improving Transcription of Nano-Pattern
Kim, K.H.;Yoo, Y.E.;Je, T.J.;Choi, D.S.;Kim, S.K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.9-14,
|
|
| 3 |
Compensation for Machining Error included by Tool Deflection Using High-Speed Camera
Bae, J.S.;Kim, G.H.;Yoon, G.S.;Seo, T.I.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.15-19,
|
|
| 4 |
Injection Molding of High Aspect Ratio Nano Features Using Stamper Heating/Cooling Process
Yoo, Y.E.;Choi, S.J.;Kim, S.K.;Choi, D.S.;Whang, K.H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.20-24,
|
|
| 5 |
Evaluation of Optical Performance for an Aspheric Lens Connecting with FE Analysis of Injection Molding
Park, K.;Um, H.J.;Kim, J.P.;Joo, W.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.25-30,
|
|
| 6 |
Mechanical Properties and Morphology of the Recycled Thermoplastic Elastomer Molding
No, B.S.;Lee, G.H.;Jeong, Y.D.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.31-35,
|
|
| 7 |
A Study on the Mechanical Properties and Shrinkage of Thermoplastic Elastomer
Han, S.R.;Kim, J.H.;Jeon, S.G.;Jeong, Y.D.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.36-41,
|
|
| 8 |
A Study on the Fabrication Method of Mold for 7 inch LCD-BLU by continuous microlens 200μm
Kim, J.S.;Ko, Y.B.;Min, I.K.;Yu, J.W.;Heo, Y.M.;Yoon, K.H.;Hwang, C.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.42-47,
|
|
| 9 |
A Study on the Fabrication Method of Mold for 2 inch LCD-BLU by 50μm Microlens : Effect of Different Aspect Ratio
Kim, J.S.;Ko, Y.B.;Min, I.K.;Yu, J.W.;Heo, Y.M.;Yoon, K.H.;Hwang, C.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.48-53,
|
|
| 10 |
Optimum Injection Molding Condition Search With Process Monitoring System
Kang, J.K.;Cho, Y.K.;Chang, H.K.;Rhee, B.O.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.54-60,
|
|
| 11 |
Development of Powder Injection Mold for Dental Scaler Tip Using Stainless Series Powder
Ko, Y.B.;Kim, J.S.;Hwang, C.J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.61-66,
|
|
| 12 |
A Study on the Forming Characteristics of Flange Using Pipe
Lee, S.D.;Lee, H.Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.16, no.1, pp.67-74,
|
|