|
| 1 |
Principle and Recent Trend of Rapid Prototyping Technology
Kim H. C.;Park S. H.;Yang D. Y.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.187-199,
|
|
| 2 |
A Study on Machining Method of Multi-Electrode
Jung T. S.;Yoo S. W.;Yang J. S.;Heo Y. M.;Kim K. S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.200-206,
|
|
| 3 |
A Progressive Fine Blanking Process Design for Forming of Carrier Plate
Kim J. D.;Kang J. J.;Hong S. K.;Kim B. J.;Kim H. K.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.207-214,
|
|
| 4 |
Heat Treatment Analysis on Low-Alloy Steel
Choi Y. S.;Kwak S. Y.;Choi J. K.;Kim J. T.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.215-223,
|
|
| 5 |
Study for Permanent Mold Design Technology and Porosity Defect Prediction Method by Multi-Phase Flow Numerical Simulations
Choi Y. S.;Cho I. S.;Hwang H. Y.;Choi J. K.;Hong J. H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.224-232,
|
|
| 6 |
Blow Characteristics in Extrusion Blow Molding for Operational Conditions
Jun Jae Hoo;Pae Youlee;Lyu Min-Young;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.233-238,
|
|
| 7 |
Development of The Die & Mould-Design System for The Productivity Increase of Die and Mould
Shin J. S.;Huh Y. M.;Yoon G. S.;Kim Y. J.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.239-244,
|
|
| 8 |
A Study on Lenticular Lens Mold Fabrication by Shaping
Je T. J.;Lee E. S.;Shim Y. S.;Kim E. Z.;Na K. H.;Choi D. S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.245-250,
|
|
| 9 |
Fabrication of 3-D Micro Structure and Micro Tool Using MEDM
Kim B. H.;Yi S. M.;Chu C. N.;Kang Y. H.;Choi T. H.;Park H. J.;Lee Y. S.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.251-256,
|
|
| 10 |
A Study on the Shear Deformation Behavior of Inner Structure-Bonded Sheet Metal
Kim J. Y.;Chung W. J.;Yang D. Y.;Kim J. H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.257-262,
|
|
| 11 |
Beating Channel Layout Design and Evaluation Technology for SMC Molds
Heo Y. M.;Ko Y. B.;Lee J. H.;Lee S. H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.263-268,
|
|
| 12 |
The Warpage Reduction for Intake Manifold Product
Lee S. H.;Shin K. H.;Yoon G. S.;Jung W. C.;Jung T. S.;Heo Y. M.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.269-276,
|
|
| 13 |
Evaluation of Punching Process Variables Influencing Micro Via-hole Quality of LTCC Green Sheet
Baek S. W.;Rhim S. H.;Oh S. I.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.277-281,
|
|
| 14 |
A Study on the Simulation and DSF Molding of V-groove Type Light Guide for a Backlight Unit
Cho K. H.;Yoon K. H.;
/
The Korean Society for Technology of Plasticity and materials processing
, v.14, no.3, pp.282-290,
|
|