Browse > Article List

논문
1 Synthesis and Characteristics of New Quaternary Superhard Ti-Mo-Si-N Coatings
Jeon, Jin-Woo;Hong, Seung-Gyun;Kim, Kwang-Ho; / The Korean Institute of Surface Engineering , v.39, no.6, pp.245-249,
2 Effect of Hydrogen Partial Pressure Ratio on Electrical and Structural Properties of ZnO Thin Film
Lee, Sung-Hun;Shin, Min-Geun;Byon, Eung-Sun;Kim, Do-Geun;Jeon, Sang-Jo;Koo, Bon-Heun; / The Korean Institute of Surface Engineering , v.39, no.6, pp.250-254,
3 The Effect of Cu Reflow on the Pd-Cu Alloy Membrane Formation for Hydrogen Separation
Mun, Jin-Uk;Kim, Dong-Won; / The Korean Institute of Surface Engineering , v.39, no.6, pp.255-262,
4 Deposition of (Ti, Cr, Zr)N-$MoS_{2}$ Thin Films by D.C. Magnetron Sputtering
Kim, Sun-Kyu;Vinh, Pham-Van; / The Korean Institute of Surface Engineering , v.39, no.6, pp.263-267,
5 Study on the Effect of Sputtering Process on the Adhesion Strength of CrZrN Films Synthesized by a Duplex Surface Treatment Process
Kim, M.K.;Kim, E.Y.;Lee, S.Y.; / The Korean Institute of Surface Engineering , v.39, no.6, pp.268-275,
6 Comparison of the Characteristics of Cu-Sn and Ni Pre-Plated Frames Prepared by Electro-Plating
Lee, D.H.;Jang, T.S.;Hong, S.S.;Lee, J.W.;Yang, H.W.;Hahn, B.K.; / The Korean Institute of Surface Engineering , v.39, no.6, pp.276-281,
7 Viscosities of $LaCl_3-NaCl$ Binary Melts
Kim, Ki-Ho; / The Korean Institute of Surface Engineering , v.39, no.6, pp.282-287,
8 The Effect of $Y_2O_3$ Dispersoids on the High Temperature Oxidation of Ti-34wt%Al-1.5wt%Mn Alloys
Lee, Dong-Bok; / The Korean Institute of Surface Engineering , v.39, no.6, pp.288-294,
9 Comparison of HVOF Thermal Spray Coatings of T800 and WC-Co Powders
Cho, T.Y.;Yoon, J.H.;Kim, K.S.;Baek, N.K.;Song, K.O.;Youn, S.J.;Hwang, S.Y.;Chun, H.G.; / The Korean Institute of Surface Engineering , v.39, no.6, pp.295-301,
10 Effects of Alloying Elements on the Surface Characteristics of Pb-Substrate for Battery
Oh, S.W.;Choe, H.C.; / The Korean Institute of Surface Engineering , v.39, no.6, pp.302-311,