|
| 1 |
Design and Assessment of an Oil-treatment Process for Bitumen Separation
Jeong, Moon;Lee, Sang-Jun;Shin, Heung-Sik;Jo, Eun-Bi;Hwang, In-Ju;Kang, Choon-Hyung;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.5-9,
|
|
| 2 |
A Study on the Flow Characteristics of an Oxidizer Feed Section for Wet-air Oxidation in Gravity Pressure Reactor
Lee, Hongcheol;Hwang, Inju;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.10-13,
|
|
| 3 |
A Feasibility Study on the Mixed Refrigerant Composition in the Rankine Cycle Empowered by Cold Energy
Jeong, Moon;Cho, Eunbi;Hwang, Inju;Kang, Choonhyoung;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.14-18,
|
|
| 4 |
Case Studies for Optimizing Heat Exchanger Networks in Steam-assisted Gravity Drainage Oil Sands Plant
Cho, Eunbi;Jeong, Moon;Kang, Choonhyoung;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.19-24,
|
|
| 5 |
Strength Evaluation of the Plant Facility for Fluid Machinery Using Schmidt Hammer in Cold Regions
Hong, Seung-Seo;Kim, YoungSeok;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.25-28,
|
|
| 6 |
Geotechnical Properties of Muskeg Soil for Construction Machinery Distributed in Oil-sand Areas
Hong, Seung-Seo;Kim, YoungSeok;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.29-32,
|
|
| 7 |
A Study on the Availability Evaluation with Failure Density Function of Equipment of Small-scale Plant
Lee, Hongcheol;Hwang, Inju;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.33-36,
|
|
| 8 |
A Study of Structure Monitoring Applicability of ZigBee Module through Oil Sand Plant Temperature around Canada
Yang, Heekwon;Lee, Chankil;Lee, Bang Yong;Park, Keunbo;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.37-42,
|
|
| 9 |
Evaluation of Horizontal Force on Pile Shaft Surrounded by Vertical PET Aggregate Layer for Fluid Machinery Structure Installation in Cold Region's Plant
Ji, Subin;Jang, Sung Min;Hwang, Soon Gap;Lee, Kicheol;Kim, Dongwook;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.43-47,
|
|
| 10 |
Evaluation of Vacuum Brazed WC and Stainless Steel for Oil Sands Plant
Chang, Se-Hun;Cho, Seung-Hyun;Ahn, Seong-Woo;Heo, Joong-Sik;Kim, In-Pyo;Oh, Ik-Hyun;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.48-52,
|
|
| 11 |
Study on the Autofrettage Pressure for SCBA Type3 Cylinder
Kim, Kwang Seok;Lee, Kyomin;Lee, Jaehun;Cho, Seongmin;
/
Korean Society for Fluid machinery
, v.19, no.3, pp.53-56,
|
|