|
1 |
Measurement of Ceiling Temperature in Tunnel for Heights and Fire Sizes of Fire Source
Park, Won-Hee;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.5-10,
|
|
2 |
Effect of Air Layer on the Performance of an Open Ducted Cross Flow Turbine
Wei, Qingsheng;Chen, Zhenmu;Singh, Patrick Mark;Choi, Young-Do;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.11-19,
|
|
3 |
Design of a Pump-Turbine Based on the 3D Inverse Design Method
Chen, Chengcheng;Zhu, Baoshan;Singh, Patrick Mark;Choi, Young-Do;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.20-28,
|
|
4 |
Mechanical Load Performance Measurements of a Low Temperature Differential Stirling Engine with Water-Sprayed Heat Transfer according to Supply Water Flow Rates and Temperatures
Sim, Kyuho;Jeong, Min-Seong;Lee, Yoon-Pyo;Jang, Seon-Jun;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.29-36,
|
|
5 |
Performance Measurements of A Stirling Engine for Household Micro Combined Heat and Power with Heat Source Temperatures and Cooling Flow Rates
Sim, Kyuho;Kim, Mingi;Lee, Yoon-Pyo;Jang, Seon-Jun;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.37-43,
|
|
6 |
Rotordynamic Analysis of See-through-type Labyrinth Seal Using 3D CFD
Ha, Tae Woong;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.44-50,
|
|
7 |
A Comparison of Performance of Six and Twelve-Blade Vane Tidal Turbines between Single and Double Blade-row Types
Nguyen, M.H.;Kim, J.H.;Kim, B.K.;Yang, C.;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.51-58,
|
|
8 |
An Investigation on Step Responses of Pitch PI Controller for a 2MW Wind Turbine Using Bladed S/W
Lim, Chae Wook;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.59-64,
|
|
9 |
Cavitating Flow Analysis of Multistage Centrifugal Pump
Rakibuzzaman, Rakibuzzaman;Suh, Sang-Ho;Kim, Hyoung-Ho;Cho, Min-Tae;Shin, Byeong-Rog;
/
Korean Society for Fluid machinery
, v.18, no.1, pp.65-71,
|
|