Browse > Article List

논문
1 Tip Gap Flow and Aerodynamic Loss Generation over a Cavity Squealer Tip with the Variation of Pressure-Side Opening Length in a Turbine Cascade
Cheon, Joo Hong;Lee, Sang Woo; / Korean Society for Fluid machinery , v.15, no.6, pp.5-10,
2 The Design and Analysis of Composite Advanced Propeller Blade for Next Generation Turboprop Aircraft
Choi, Won;Kim, Kwang-Hae;Lee, Won-Joong; / Korean Society for Fluid machinery , v.15, no.6, pp.11-17,
3 Performance Analysis of a Steam Injected Gas Turbine Combined Heat and Power System Considering Turbine Blade Temperature Change
Kang, Soo Young;Kim, Jeong Ho;Kim, Tong Seop; / Korean Society for Fluid machinery , v.15, no.6, pp.18-24,
4 CFD Analysis on the Performance and Internal Flow of a Micro Cross-Flow Hydro Turbine in the Range of Very Low Specific Speed
Choi, Young-Do;Son, Sung-Woo; / Korean Society for Fluid machinery , v.15, no.6, pp.25-30,
5 Feature Parameter Analysis for Rotor Fault Diagnosis
Jeoung, Rae-Hycuk;Chai, Jang-Bom;Lee, Byoung-Hak;Lee, Do-Hwan;Lee, Byung-Kon; / Korean Society for Fluid machinery , v.15, no.6, pp.31-38,
6 Design Parameter Sensitivity Analysis of a 200kW Class Micro Gas Turbine System
Shin, Hyun Dong;Kang, Do Won;Kim, Tong Seop;Choi, Mun-Kyoung;Park, Pil Je; / Korean Society for Fluid machinery , v.15, no.6, pp.39-45,
7 Axial Thrust Control of High-speed Centrifugal Pump with Cavity Vanes
Kim, Dae-Jin;Choi, Chang-Ho;Noh, Jun-Gu;Kim, Jinhan; / Korean Society for Fluid machinery , v.15, no.6, pp.46-50,
8 Performance Evaluation of Compressor to Develop 500W Class Ultra-Micro Gas Turbine
Seo, JeongMin;Park, Jun Young;Choi, Bum Seok;Park, Moo Ryong; / Korean Society for Fluid machinery , v.15, no.6, pp.51-57,
9 A Numerical Study on the Performance Improvement of Guide Vanes in an Axial-flow Pump
Park, Hyun-Chang;Kim, Sung;Yoon, Joon-Yong;Choi, Young-Seok; / Korean Society for Fluid machinery , v.15, no.6, pp.58-63,
10 A Study on Repair Case of Journal and Bearing Damage for 25MW Industrial Gas Turbine
Kim, Byung Ok;Sun, Kyung Ho;Lee, An Sung; / Korean Society for Fluid machinery , v.15, no.6, pp.64-69,
11 Waterhammer for the In-Line Intake Pumping Station with Air Chamber
Kim, Kyung-Yup;Ahn, Cheoul-Hong;Kim, Bum-Jun; / Korean Society for Fluid machinery , v.15, no.6, pp.70-76,
12 Design Optimization of a Single-Stage Transonic Axial Compressor and Test Evaluation of Its Aerodynamic Performance
Park, Tae Choon;Kang, Young-Seok;Hwang, Oh-Sik;Song, Ji-Han;Lim, Byeung Jun; / Korean Society for Fluid machinery , v.15, no.6, pp.77-84,
13 Numerical Investigation on Internal Flow Field of a Single-Stage Transonic Axial Compressor
Song, Ji-Han;Hwang, Oh-Sik;Park, Tae Choon;Lim, Byung-Jun;Yang, Soo-Seok;Kang, Young-Seok; / Korean Society for Fluid machinery , v.15, no.6, pp.85-91,