|
| 1 |
Effect of Cone Angle of a Seven-Hole Probe on the Accuracy Flow Measurement
Lee, Yong-Jin;Park, Jung-Shin;Nho, Young-Cheol;Jeon, Chang-Soo;Kwak, Jae-Su;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.5-11,
|
|
| 2 |
A Numerical Study on the Performance Analysis of the Mixed Flow Pump for FPSO
Kang, Kyung-Won;Kim, Young-Hun;Kim, Young-Ju;Woo, Nam-Sub;Kwon, Jae-Ki;Yoon, Myung-O;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.12-17,
|
|
| 3 |
Analysis on the Flow and the Byproduct Particle Trajectory of Roots Type Vacuum Pump
Lee, Chan;Kil, Hyun-Gwon;Noh, Myung-Keun;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.18-23,
|
|
| 4 |
Prediction of Power and Efficiency Requirement of Motor/generator for 500W Class Micro Gas Turbine Generator Considering Losses
Park, Cheol-Hoon;Choi, Sang-Kyu;Ham, Sang-Yong;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.24-30,
|
|
| 5 |
Numerical Optimization of a Transonic Axial Compressor with Casing Grooves for Improvement of Operating Stability
Kim, Jin-Hyuk;Choi, Kwang-Jin;Kim, Kwang-Yong;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.31-38,
|
|
| 6 |
Study of Flow Control Range according to Valve Type
Park, Jong-Ho;Park, Han-Yung;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.39-47,
|
|
| 7 |
Changes of Mooring Force due to Structural Modification of a Barge Ship
Park, Jung-Hong;Kim, Kwang-Hoon;Moon, Byung-Young;Jang, Tak-Soo;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.48-54,
|
|
| 8 |
Design Optimization of a Printed Circuit Heat Exchanger Using Surrogate Models
Lee, Sang-Moon;Kim, Kwang-Yong;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.55-62,
|
|
| 9 |
Numerical Optimization for Performance Improvement of a Tunnel Ventilation Jet fan
Kim, Joon-Hyung;Kim, Jin-Hyuk;Kim, Kwang-Yong;Yoon, Joon-Yong;Choi, Young-Seok;Yang, Sang-Ho;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.63-68,
|
|
| 10 |
Rotordynamic Transient Analysis of Vertical Sea Water Lift Pump for FPSO Deep Well
Kim, Byung-Ok;Yang, Sung-Jin;Lee, Myung-Ho;
/
Korean Society for Fluid machinery
, v.14, no.5, pp.69-74,
|
|