|
1 |
Bending of an isotropic non-classical thin rectangular plate
Fadodun, Odunayo O.;Akinola, Adegbola P.;
/
Techno-Press
, v.61, no.4, pp.437-440,
|
|
2 |
RBDO analysis of the aircraft wing based aerodynamic behavior
El Maani, Rabii;Makhloufi, Abderahman;Radi, Bouchaib;El Hami, Abdelkhalak;
/
Techno-Press
, v.61, no.4, pp.441-451,
|
|
3 |
Series tuned mass dampers in train-induced vibration control of railway bridges
Kahya, Volkan;Araz, Onur;
/
Techno-Press
, v.61, no.4, pp.453-461,
|
|
4 |
Weibull distribution based constitutive model for nonlinear analysis of RC beams
Murthy, A. Ramachandra;Priya, D. Shanmuga;
/
Techno-Press
, v.61, no.4, pp.463-473,
|
|
5 |
Minimum cost design of overhead crane beam with box section strengthened by CFRP laminates
Kovacs, Gyorgy;Farkas, Jozsef;
/
Techno-Press
, v.61, no.4, pp.475-481,
|
|
6 |
The effects of special metallic dampers on the seismic behavior of a vulnerable RC frame
Ozkaynak, Hasan;
/
Techno-Press
, v.61, no.4, pp.483-496,
|
|
7 |
Auto-parametric resonance of framed structures under periodic excitations
Li, Yuchun;Gou, Hongliang;Zhang, Long;Chang, Chenyu;
/
Techno-Press
, v.61, no.4, pp.497-510,
|
|
8 |
Effect of Ferro-cement retrofit in the stiffened infill RC frame
Arulselvan, Suyamburaja;Sathiaseelan, P.;
/
Techno-Press
, v.61, no.4, pp.511-518,
|
|
9 |
Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel
Keblouti, Ouahid;Boulanouar, Lakhdar;Azizi, Mohamed Walid;Yallese, Mohamed Athmane;
/
Techno-Press
, v.61, no.4, pp.519-526,
|
|
10 |
Seismic loss-of-support conditions of frictional beam-to-column connections
Demartino, Cristoforo;Monti, Giorgio;Vanzi, Ivo;
/
Techno-Press
, v.61, no.4, pp.527-538,
|
|
11 |
Effect of magnetic field on wave propagation in cylindrical poroelastic bone with cavity
Farhan, A.M.;
/
Techno-Press
, v.61, no.4, pp.539-549,
|
|
12 |
An approximate spectral element model for the dynamic analysis of an FGM bar in axial vibration
Lee, Minsik;Park, Ilwook;Lee, Usik;
/
Techno-Press
, v.61, no.4, pp.551-561,
|
|