|
1 |
A study on the thickness distribution and pattern deformation of films in vacuum-assisted thermoforming
Seong, Gyeom-Son;Lee, Ho-Sang;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.5-10,
|
|
2 |
A study on the flatness of automotive torque-angle sensors
Yoon, Sean-Jhin;Cho, Yong-Moo;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.11-15,
|
|
3 |
An analysis on the surface roughness and residual stress of SUS-304 using abrasive film polishing
Shin, Bong-Cheol;Kim, Byung-Chan;Lim, Dong-Wook;Min, Kyung-Ho;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.16-21,
|
|
4 |
A study on the reduction method of sink marks for plastic products with T-shape
Kim, Da-Eun;Lee, Chun-Kyu;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.22-26,
|
|
5 |
A Study on the Design of Door Module PNL Using CAE and Inverse Compensation for Warpage
Kim, Doo-Tae;Han, Seong-Ryeol;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.27-33,
|
|
6 |
A Study on the Finite Element Analysis of springback characteristics according to stamping process conditions of UHSS with UTS of 1.2GPa
Jang, Hyun-Min;Choi, Kye-Kwang;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.34-39,
|
|
7 |
A study on excavator front support parts to minimize springback defects
Jeon, Yong-Jun;Heo, Young-Moo;Lee, Ha-Sung;Kim, Dong-Earn;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.40-45,
|
|
8 |
A study on machining characteristics in vaporized amplification sheets of electron beam
Kim, Seong Hyun;Jung, Sung Taek;Kim, Hyun Jeong;Baek, Seung Yub;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.46-50,
|
|
9 |
An analysis on the injection mold simulation of single cushion pact cosmetic container for the friendly-environment and high productivity
Jung, Sung-Taek;Kim, Seong-Hyun;Kim, Hyun-Jeong;Lee, Joong-Bae;Baek, Seung-Yub;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.51-56,
|
|
10 |
A study on the blood collecting device of main shaft injection molding for measuring blood glucose by CAE analysis
Baek, Seung Yub;
/
Korean Society of Die & Mold Engineering
, v.12, no.2, pp.57-62,
|
|