|
1 |
A Fundamental Study on the Design of Two-axis Drive Manipulator for Laser-assisted Machining
Kim, Dong-Hyeon;Cha, Na-Hyeon;Kim, Tae-Woo;Lee, Choon-Man;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.813-817,
|
|
2 |
Prediction of Necking in Tensile Test using Crystal Plasticity Model and Damage Model
Kim, Jong-Bong;Hong, Seung-Hyun;Yoon, Jeong-Whan;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.818-823,
|
|
3 |
A Study on the Design of Cooling Channels of Injection Mould to Manufacture a Flat Part with a Partly Thick Volume
Ahn, Dong-Gyu;Park, Min-Woo;Kim, Hyung-Soo;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.824-833,
|
|
4 |
Current Trends of Vibration-Assisted Machining in Micro/Nano Scales
Lee, Moon-Gu;Jeon, Yong-Ho;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.834-839,
|
|
5 |
A Study on Development of Automotive Panel of Bumper Reinforcement with High Strength Steel Using Roll Forming Process
Jung, Dong-Won;Kim, Dong-Hong;Kim, Bong-Chun;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.840-844,
|
|
6 |
Development of Diaphragm-type Stylus Probe for Ultra-precision On-machine Measurement Application
Lee, Jung-Hoon;Lee, Chan-Hee;Choi, Joon-Myeong;Kim, Ho-Sang;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.845-852,
|
|
7 |
Measurement of Temperature Field in the Primary Deformation Zone in 2-D Orthogonal Machining Using IR (Infra-Red) Thermography
Kim, Myung-Jae;Jung, Hyun-Gi;Hwang, Ji-Hong;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.853-862,
|
|
8 |
Analysis for the Squareness Measurement using Laser Interferometer
Lee, Dong-Mok;Lee, Hoon-Hee;Yang, Seung-Han;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.863-872,
|
|
9 |
A Spatial Stability of the Conductive Rod Conveyed by Double Electrodynamic Wheels
Jung, Kwang-Suk;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.873-878,
|
|
10 |
Manufacturing Cost Optimization of Ultrasonic Horn for Flip-chip Bonding using Tolerance Design
Kim, Jong-Hyok;Kwon, Won-Tae;Lee, Soo-Il;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.879-886,
|
|
11 |
A Method of Lamb-Wave Modes Decomposition for Structural Health Monitoring
Jun, Yong-Ju;Park, Il-Wook;Lee, U-Sik;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.887-895,
|
|
12 |
Investigation of Development of Bumper Back-Beam Using a Thermoplastic Polyolefin
Ahn, Dong-Gyu;Kim, Se-Hun;Park, Gun-Sung;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.896-905,
|
|
13 |
Measurement of a Six-degree-of-freedom Dynamic Characteristics using Angle Sensor-Implemented Grating Interferometry
Lee, Cha-Bum;Kim, Gyu-Ha;Lee, Sun-Kyu;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.906-912,
|
|
14 |
Micro-particles in a Nanoliter Droplet Dispensed by a Pneumatic Dispensing System and Its Measurement
Lee, Sang-Min;Kim, Joon-Won;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.913-919,
|
|
15 |
Investigation into the Fabrication of Micro-scale Winkles using Repetitive Contact-and-open Method
Kim, Seong-Jin;Park, Sang-Hu;
/
Korean Society for Precision Engineering
, v.29, no.8, pp.920-926,
|
|