|
1 |
Importance of Inkjet Reliability and Calibration toward a New De Factor Industry Standard
Shin, Dong-Youn;Kim, Dong-Soo;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.9-16,
|
|
2 |
Novel Combination Technology of the Printing and Self-aligned Process for Organic Thin Film Transistor
Kim, Kang-Dae;Jo, Jeong-Dai;Lee, Taik-Min;Kim, Chung-Hwan;Shin, Dong-Youn;Kim, Dong-Soo;Choi, Byung-Oh;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.17-20,
|
|
3 |
A Study on the Tower type Fizeau Interferometer System with a Fold Minor for Measuring Large Optical Lens Profile
Lee, Eung-Suk;Lee, Ki-Am;Kim, Ok-Hyun;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.21-28,
|
|
4 |
Development of an Algorithm for Detecting Angular Bisplacement with High Accuracy Based on the Dual-Encoder
Lee, Se-Han;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.29-36,
|
|
5 |
Implementation of AR based Assembly System for Car C/pad Assembly
Park, Hong-Seok;Choi, Hung-Won;Park, Jin-Woo;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.37-44,
|
|
6 |
Development of a Test Stand for Measuring Ink Jetting Performance
Kwon, Kye-Si;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.45-50,
|
|
7 |
A Study on the Fracture Toughness of Plasma-treated Aluminum/Aluminum Foam Composites using Nitrogen Gas
Chung, Hyup-Jae;Rhee, Kyong-Yop;Han, Beom-Suck;Ryu, Yong-Mun;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.51-56,
|
|
8 |
Equivalent Beam Modeling Technique and Experimental Verification of Corrugated Flexible Joint Bend Considering Strain Energy
Kim, Jin-Gon;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.57-64,
|
|
9 |
Transient Heat Transfer Analysis of Brake Drum Shape
Kim, Yang-Sul;An, Su-Chul;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.65-71,
|
|
10 |
The Shape Optimal Design of Shaft Serration Using Design of Experiment and Finite Element Method
Kim, Eui-Soo;Kim, Byung-Min;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.72-79,
|
|
11 |
Investigation into Low Velocity Impact Characteristics of the Stainless Steel Sheet with Thickness of 0.7 mm on the Stretching Condition using Three-Dimensional Finite Element Analysis
Ahn, Dong-Gyu;Moon, Kyung-Je;Jung, Chang-Gyun;Yang, Dong-Yol;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.80-87,
|
|
12 |
Sensitivity of Electroplating Conditions on Young's Modulus of Thin Film
Kim, Sang-Hyun;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.88-95,
|
|
13 |
Biomechanical Fatigue Analysis of Cervical Plate Systems by using a Computer Simulation Based on Finite Element Method
Kim, Sung-Min;Yang, In-Chul;Cho, Sung-Youn;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.96-103,
|
|
14 |
Comparison of Energy Consumption of Reciprocating Gait Orthosis(RGO) and Powered Gait Orthosis(PGO) during Gait
Kang, Sung-Jae;Ryu, Jei-Cheong;Mun, Mu-Seong;
/
Korean Society for Precision Engineering
, v.25, no.8, pp.104-110,
|
|