Browse > Article List
학술지 정보
Journal of the Korean Society for Precision Engineering  

논문
1 Development of Solder Sphere Manufacturing Equipment Controller
김성권; / Korean Society for Precision Engineering , v.20, no.10, pp.5-11,
2 Development of 3-D Inspection Technology for Solder Paste Using PMP method
김종형;한세현;고국원;고경철; / Korean Society for Precision Engineering , v.20, no.10, pp.12-21,
3 Design and Control of Dual Servo Mechanism for High Precision Position Control
최현석;송치우;한창수; / Korean Society for Precision Engineering , v.20, no.10, pp.22-30,
4 Optimal Cutting Condition in Side Wall Milling Considering Form Accuracy
류시형;최덕기;주종남; / Korean Society for Precision Engineering , v.20, no.10, pp.31-40,
5 Feasibility Study on Monitoring of Small-Diameter Tap Breakage with AE Sensor in High-Speed Tapping
이돈진;김선호;안중환; / Korean Society for Precision Engineering , v.20, no.10, pp.41-46,
6 Switched Reluctance Contact-Free Linear Actuator Using Attractive Magnetic Forces
이상헌;정광석;백윤수; / Korean Society for Precision Engineering , v.20, no.10, pp.47-55,
7 Tool-Wear Characteristics in Turning of STS 304
이재우; / Korean Society for Precision Engineering , v.20, no.10, pp.56-64,
8 Decrease of Porosity and Cracking in the cw Nd:YAG Laser Welding of SM45C
유영태;오용석;노경보;신호준;임기건; / Korean Society for Precision Engineering , v.20, no.10, pp.65-73,
9 Study on Cutting Characteristics of WC-Co with Micro Cutting in SEM
허성중; / Korean Society for Precision Engineering , v.20, no.10, pp.74-81,
10 A Stability Study on Visual Servoing using Dynamic Calibration
김진대;조영식;이상화;이재원; / Korean Society for Precision Engineering , v.20, no.10, pp.82-88,
11 CNC Implemented Fault Diagnosis and Remote-Service System
김선호;김동훈;김도연;박영우;윤원수; / Korean Society for Precision Engineering , v.20, no.10, pp.89-97,
12 Modeling and Parameter Estimation of Solenoid Valve in Automatic Transmission by the Least Square Method
노형우;박상훈;송창섭; / Korean Society for Precision Engineering , v.20, no.10, pp.98-104,
13 An Analytical Investigation on Fluid Dynamics of Filler Neck Check Valve for On-board Refueling Vapor Recovery
김성훈;이재천; / Korean Society for Precision Engineering , v.20, no.10, pp.105-111,
14 Real-time Compensation of Motion Errors Using Extended Twyman-Green Interferometry
배은덕;오정석;김승우; / Korean Society for Precision Engineering , v.20, no.10, pp.112-119,
15 Development of the Roughing Path Measurement System for Footwear
강동배;김화영;손성민;안중환; / Korean Society for Precision Engineering , v.20, no.10, pp.120-129,
16 Robust Trajectory Control of a Hydraulic Excavator using Disturbance Observer in $H_\infty$Framework
최종환;김승수;양순용;이진걸; / Korean Society for Precision Engineering , v.20, no.10, pp.130-140,
17 Absolute Positioning System of Mobile Robot using Light Navigation Path
박용택;정효용;국금환; / Korean Society for Precision Engineering , v.20, no.10, pp.141-147,
18 Channel Design of Decanter-Type Centrifuge (I) - Particles′ Suspension and the Channel Size
서용권; / Korean Society for Precision Engineering , v.20, no.10, pp.148-155,
19 Modeling of Functional Surface using Modified B-spline
황종대;정종윤;정윤교; / Korean Society for Precision Engineering , v.20, no.10, pp.156-163,
20 Design of a Wheel Bearing Unit Using Taguchi Method
안태길;이상훈; / Korean Society for Precision Engineering , v.20, no.10, pp.164-168,
21 A Study on Computational Efficiency Enhancement by Using Full Gray Code Genetic Algorithm
이원창;성활경; / Korean Society for Precision Engineering , v.20, no.10, pp.169-176,
22 Energy Absorbing Characteristics of Thin-Walled Members for Vehicles Having Various Section Shapes
차천석;정진오;이길성;백경윤;양인영; / Korean Society for Precision Engineering , v.20, no.10, pp.177-182,
23 Thermo-Mechanical Interaction of Flip Chip Package Constituents
박주혁;정재동; / Korean Society for Precision Engineering , v.20, no.10, pp.183-190,
24 Design of Spherical Aberration Free Aspherical Lens by Use of Ray Reverse Tracing Method
김한섭;박규열;이원규;전종업; / Korean Society for Precision Engineering , v.20, no.10, pp.191-198,
25 Error Analysis and Improvement of the Timoshenko Beam based Finite Element Model for Multi-Stepped Beam Structures
홍성욱;이용덕;김만달; / Korean Society for Precision Engineering , v.20, no.10, pp.199-207,
26 Investigation on the Automatic Surface Generation for Extrusion Die of T-shaped Section using NURBS Surface and Area Mapping Method
임종훈;유동진; / Korean Society for Precision Engineering , v.20, no.10, pp.208-217,
27 Diagnostic System of Modeling Errors Generated from IGES CAD Data Exchange
Park, Sang-Ho;Park, Jong-Wook;Han, Soon-Heung;Choi, Young;Yang, Jung-Sam;Lee, Byung-Hoon; / Korean Society for Precision Engineering , v.20, no.10, pp.218-225,
28 Application of Stiffness Matrix Element for Finite Element Analysis of Spine
정일섭;안면환; / Korean Society for Precision Engineering , v.20, no.10, pp.226-232,
29 A Method to Describe and Analyze Human Knee Joint Motion
Moon, Byung-Young;Son, Kwon;Park, Jung-Hong;Seo, Jung-Tak; / Korean Society for Precision Engineering , v.20, no.10, pp.233-239,