|
1 |
Technical Trends of Micro Factory
Park, Jong-Gwon;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.7-14,
|
|
2 |
Development of Microfactory System for Future Industry
Gang, Jae-Hun;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.15-22,
|
|
3 |
Micro Machine Tools and Micro Machining
Bae, Yeong-Ho;Kim, Hui-Sul;Go, Tae-Jo;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.23-30,
|
|
4 |
Micro-Measurement and Machining Complexation
Lee, Chae-Mun;Im, Tae-Sun;Jeong, U-Seop;Lee, Deuk-U;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.31-36,
|
|
5 |
A Study on the Vibration Characteristics of Rotor System with Fluid Film Bearing
Park, Seong-Hwan;O, Taek-Yeol;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.37-44,
|
|
6 |
Combined Optimal Design of Structure-Control Systems by Sliding Mode Control
Park, Jung-Hyeon;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.45-51,
|
|
7 |
Thermo-mechanical Characteristics of High Temperature NITINOL Shape Memory Alloy
Yun, Seong-Ho;Sridhar Krishnan;Scott R. White;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.52-59,
|
|
8 |
A Study on the Optimal Structural Design using FEM for Micro Stage
Kim, Jae-Yeol;Gwak, Lee-Gu;Han, Jae-Ho;Kim, Hang-U;;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.60-65,
|
|
9 |
Path Optimization Using an Genetic Algorithm for Robots in Off-Line Programming
Kang, Sung-Gyun;Son, Kwon;Choi, Hyeuk-Jin;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.66-76,
|
|
10 |
A Study on the Die Casting of Mg-9Al-1Zn Alloy for Air Bag Case
Kim, Sun-Ho;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.77-83,
|
|
11 |
The Characteristics of Fatigue Cracks Emanating from Small Hole Defects Located Opposite Position of the Shaft Cross Section
Song, Sam-Hong;An, Il-Hyeok;Lee, Jeong-Mu;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.84-91,
|
|
12 |
Indirect Method for Measurement of Tool Edge Roughness in flat End Mill
Kim, Jeon-Ha;Gang, Myeong-Chang;Kim, Jeong-Seok;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.92-98,
|
|
13 |
A Study on Improvement of Accuracy using Geometry Information in Reverse Engineering of Injection Molding Parts
Kim, Yeon-Sul;Lee, Hui-Gwan;Hwang, Geum-Jong;Gong, Yeong-Sik;Yang, Gyun-Ui;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.99-106,
|
|
14 |
Speed Sensorless Torque Monitoring of Induction Spindle Motor using Graphical Programming
Park, Jin-U;Gwon, Won-Tae;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.107-113,
|
|
15 |
Position/Force Control of Constrained Flexible Manipulators Using Structural Compliance Modeling
Kim, Jin-Su;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.114-119,
|
|
16 |
Integrated Structure and Controller Design of Single-Link Flexible Arm for Improving the Performance of Position Control
Lee, Min-U;Park, Jang-Hyeon;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.120-129,
|
|
17 |
On the Analysis of Dynamic Characteristics of Pipe Supporting Hydraulic Snubber in Electric Power Plant with State-space Model and Impulse Testing
Lee, Jae-Cheon;Im, Mun-Hyeok;Hwang, Tae-Yeong;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.130-138,
|
|
18 |
Development of Motion Capture System
U, Jeong-Jae;Choe, Hyeong-Sik;Kim, Yeong-Sik;Jeon, Dae-Won;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.139-146,
|
|
19 |
Determination of Process Parameters in Stereolithography using Neural Network
Lee, Eun-Deok;Sim, Jae-Hyeong;Baek, In-Hwan;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.147-155,
|
|
20 |
A Study on the Correlation between Temperature and CMP Characteristics
Gwon, Dae-Hui;Kim, Hyeong-Jae;Jeong, Hae-Do;Lee, Eung-Suk;Sin, Yeong-Jae;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.156-162,
|
|
21 |
Dynamic Model and Analysis of a Vacuum Circuit Breaker Mechanism for High-Speed Closing and Opening Simulations
An, Gil-Yeong;Kim, Su-Hyeon;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.163-170,
|
|
22 |
Inertia Force Problem and Nozzle Contact Mechanism on Linear Motor Drive Injection Molding Machine
Bang, Yeong-Bong;Yun, Deung-Jin;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.171-177,
|
|
23 |
Development of Steering Control System for UCT (Unmanned Container Transporter) Using Robust Control
Jeong, Seung-Gwon;Kim, In-Su;Kim, Chang-Seop;Choe, Ju-Yong;Yun, Gang-Seop;Lee, Man-Hyeong;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.178-186,
|
|
24 |
A Study on Machining Electrode for LED Mold with Shaped End-Mill
Kim, Hyeong-Chan;Lee, Hui-Gwan;Hwang, Geum-Jong;Gong, Yeong-Sik;Yang, Gyun-Ui;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.187-194,
|
|
25 |
A Study on Ultra Precision Machining for Aspherical Surface of Optical Parts
Lee, Ju-Sang;;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.195-201,
|
|
26 |
Development of Spur Gear Design Software using Tooth Profile Modification
Kim, Tae-Wan;Hwang, Jin-Yeong;Jo, Yong-Ju;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.202-211,
|
|
27 |
A Study on Nano-polishing of Injection Molds using Fixed Abrasive Pad
Choe, Jae-Yeong;Kim, Ho-Yun;Park, Jae-Hong;Jeong, Hae-Do;Seo, Heon-Deok;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.212-220,
|
|
28 |
Characteristics of Environment-friendly Semi-dry Turning
Lee, Jong-Hang;Lee, Sang-Jo;Lee, Seok-U;Choe, Heon-Jong;
/
Korean Society for Precision Engineering
, v.19, no.10, pp.221-226,
|
|